Installation & Assembly

5
REV-11 19, 12
Faucet Installation
8. Remove the pop-up stopper (M) and pop-up ange (N) from the pop-up
assembly.
9. Apply adequate amount of plumbers putty underside of pop-up ange
(N). Then insert pop-up drain assembly from underside of the sink and
secure the pop-up ange (N) from the top.
10. Rotate the drain body so that horizontal rod hole faces back of the fau-
cet. Hold the pop-up assembly in place and tighten the locknut (O).
11. Remove the excess putty. Connect the trap (P). ( check manufacturer’s
instructions for installation)