Installation & Assembly

7
REV-11 19, 12
Faucet Installation
16. Connect the valves to inlet supply lines. Connect the supply stops to
the inlet supply lines (left is hot water supply and right is cold water
supply). Make sure inlet supply lines are securely tighten. Do not over-
tighten. Turn on supply stop. Remove aerator (W).
17. Check for any leaks. Make sure all the connection are secure.
18. Open the handles, ush and allow water to run at full ow for at least
one minute. Close the handles.
19. Replace aerator (W).
For more care information or trouble shooting inquiries about your
Pioneer Product, please see the contact information on the back page.