User Manual

22
03
Section
En
Operating this unit
Audio
Loudness:
Turn on or off the loudness.
SubWoofer:
Selecting 80Hz, 120Hz or 160Hz to activate
subwoofer-out.
Selecting subwoofer off to activate rear line-
out.
Sub Volume:
Select subwoofer volume: 0 to 33.
• Sub Volume couldn't be adjusted when
SubWoofer Off is selected.
Radio
LOC DX:
Select radio local or distant.
LOC: Only stations with strong signal can
be received.
DX: Stations with strong and weak signals
can be received.
Stereo / Mono:
Select FM stereo or mono.
FM Step(FM tuning step):
Select FM step 50kHz or 100kHz
seek tuning step
• The tuning step remains at 50kHz during
manual tuning.
AM Step:
Select AM step 9kHz or 10kHz
The AM tuning step can be switched
between 9kHz and 10kHz.
Bluetooth
Bluetooth:
If the Bluetooth is setting is On, then the
BT will be available , otherwise the BT will
never work and in disable status.
Connect:
If the Connect is set to Auto, then BT of
the unit will connect automatically with the
HFP device which is already paired in every
disconnect status ( Bluetooth must be “On”).
Auto Answer:
If the Auto Answer is set to Auto, then
BT of the unit will answer the in-coming
call automatically when the BT is already
connected with your HFP device( Bluetooth
must be “On”), otherwise you have to
answer the in-coming call by press answer
button of the remote or panel.
Pairing Code:
Change the pin code by the remote control.
Default pin code is “1234”.
Audio setting
AUDIO SETTING
EQ FLAT
Press the [SEL] button to enter audio setting
menu. First press shows current EQ. Press
[ ] / [ ] button on the remote control to
changes EQ in this order:
EQ FLAT -> EQ POP -> EQ ROCK -> EQ
CLASSIC -> EQ JAZZ -> EQ USER.
To set user definition, press [SEL] button
or [ • ] (Left) / [ • ] (Right) button on the front
panel or [ ] / [ ] button on the remote
control to select it including: BAS(bass)/
MID(middle)/TRE(treble)/BAL(balance)/
FAD(fader), press [ ] / [ ] button on the
remote control to adjust value.
Video setting
VIDEO SETTING
BRI CON SAT
At Audio setting menu, press [SEL] button
or [ • ] (Left) / [ • ] (Right) button on the front
panel or [ ] / [ ] button on the remote
control to select it including: BRI(brightness)/
CON(contrast)/SAT(saturation), press [ ]
/ [ ] button on the remote control to adjust
value.
* Rear monitor is not adjustable.
Note
Video setting is adjustable for this product
display only, it is not adjustable when video
output to the other devices display.