User Manual
Appendix
34
En
External storage device (USB)
The playback sequence is the same as the 
recorded sequence  in  the external storage 
device (USB).
To  specify  the  playback  sequence,  the 
following method is recommended.
 Create a le name that includes numbers 
that specify the playback sequence (e.g., 
01xxx.mp3 and 099yyy.mp3).
 Put those les into a folder.
 Save the folder that contains the les to 
the external storage device (USB).
However,   depending  o n   th e   system 
environment, you may not be able to specify 
the playback sequence.
For  USB  portable  audio  p layers,  t he 
sequence is  different and depends on the 
player. 
Using the display correctly
CAUTION
•
  If  liquid  or  foreign  matter  should  get 
inside  this  unit,  turn  off  the  power 
immediately  and  consult  your  dealer 
or  the  nearest  authorized  PIONEER 
Service Station.  Do  not use the  unit in 
this  condition  because  doing  so  may 
result  in  fire,  electric  shock,  or  other 
failure.
•  If  you  notice  smoke,  a  strange  noise 
or  smell,  or any  other  abnormal  signs 
from  the  display,  turn  off  the  power 
immediately  and  consult  your  dealer 
or  the  nearest  authorized  PIONEER 
Service  Station.  Using  this  unit  in  this 
condition  may  result  in  permanent 
damage to the system.
•  Do not disassemble or  modify  this unit, 
as  there  are high-voltage components 
i n s i d e   whi c h   ma y   c a u s e   ele c t r i c 
shock.  Be  sure  to  consult  your  dealer 
or  the  nearest  authorized  PIONEER 
Service  Station  for  internal inspection, 
adjustments, or repairs.
Handling the display
•
  When  the  display is  subjected to  direct 
sunlight for a long  period  of time,  it will 
become very  hot  resulting  in  possible 
damage to the LCD screen. You should 
avoid exposing the  display unit to direct 
sunlight as much as possible.
•  The  display  should be  used  within  the 
temperature range of –10°C to +60°C. 
  At temperatures higher or lower than this 
operating temperature range, the display 
may not operate normally.
Liquid crystal display (LCD) screen
•  Heat from the  heater may damage the 
LCD screen, and cool air from the cooler 
may  cause  moisture  to  form inside  the 
display  resulting  in  possible  damage. 
Also, if the display is cooled down by the 
cooler,  the  screen  may  become  dark, 
or the  life span  of  the small  uorescent 
tube  used  inside  the  display  may  be 
shortened.
•  Small  black  dots  or  white  dots  (bright 
dots)  may  appear on  the  LCD  screen. 
Additional information
Example of a hierarchy
( )
0
1
2
♪①
♪②
5
♪⑧
♪⑦
6
7
⑨
♪③
3
4
♪④
♪⑤
♪⑥
Layer1 Layer2 Layer3 Layer5Layer4
○ Root Folde
r
Folder
♪ File
♪
CAUTION
Pioneer accepts  no responsibility  for  data 
lost  on  the  iPod,  even  if  that  data  is  lost 
while this unit is used.










