VSX-1023_823_UCSMXCN_En.book 1 ページ 2012年12月18日 火曜日 午前11時7分 AV Receiver VSX-1023-K VSX-823-K Register your product on http://www.pioneerelectronics.com (US) http://www.pioneerelectronics.ca (Canada) • Protect your new investment The details of your purchase will be on file for reference in the event of an insurance claim such as loss or theft.
VSX-1023_823_UCSMXCN_En.book 2 ページ 2012年12月18日 火曜日 午前11時7分 VENTILATION CAUTION IMPORTANT When installing this unit, make sure to leave space around the unit for ventilation to improve heat radiation (at least 40 cm at top, 20 cm at rear, and 20 cm at each side).
VSX-1023_823_UCSMXCN_En.book 3 ページ 2012年12月18日 火曜日 午前11時7分 This Class B digital apparatus complies with Canadian ICES-003. 1) 2) 3) 4) 5) 6) 7) Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
VSX-1023_823_UCSMXCN_En.book 4 ページ 2012年12月18日 火曜日 午前11時7分 Contents Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. 03 Basic Setup Before you start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 04 Basic playback Checking what’s in the box. . . . . . . . . . . . . . . . . . . . . . . . . 6 Installing the receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
VSX-1023_823_UCSMXCN_En.book 5 ページ 2012年12月18日 火曜日 午前11時7分 Contents 08 Using the MULTI-ZONE feature (VSX-1023 only) MULTI-ZONE listening . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Making MULTI-ZONE connections . . . . . . . . . . . . . . . . 54 Using the MULTI-ZONE controls . . . . . . . . . . . . . . . . . . 54 09 Control with HDMI function Making Control with HDMI connections. . . . . . . . . . . . . . HDMI Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
VSX-1023_823_UCSMXCN_En.
VSX-1023_823_UCSMXCN_En.book 7 ページ 2012年12月18日 火曜日 午前11時7分 Chapter 1 Controls and displays 4 Front panel 1 2 3 4 5 6 7 8 9 10 7 19 26 20 21 27 22 28 23 29 24 30 21 31 30 25 32 VSX-1023 11 12 13 14 15 1 INPUT SELECTOR dial Selects an input source (page 25). 2 SPEAKERS See Switching the speaker terminal on page 15. The Speaker System setting may or may not be displayed, depending on the input source you have selected.
VSX-1023_823_UCSMXCN_En.book 8 ページ 2012年12月18日 火曜日 午前11時7分 1 ADVANCED SURROUND – Switches between the various surround modes (page 35). 15 ECO Controls and displays 25 PRESET information or input signal indicator Shows the preset number of the tuner or the input signal type, etc. HDMI – Lights when an HDMI signal is selected. Blinks when an HDMI signal is selected and selected HDMI input is not provided. Switches between ECO Mode 1/ECO Mode 2.
VSX-1023_823_UCSMXCN_En.book 9 ページ 2012年12月18日 火曜日 午前11時7分 1 Controls and displays • The following buttons are not used with this receiver: Remote control - PTY, SHIFT 1 2 3 4 11 RECEIVER SLEEP SOURCE RECEIVER INPUT 1 SLEEP Press to change the amount of time before the receiver switches into standby (30 min – 60 min – 90 min – Off). You can check the remaining sleep time at any time by pressing SLEEP once. 2 RECEIVER 12 Switches the receiver between standby and on.
VSX-1023_823_UCSMXCN_En.book 10 ページ 2012年12月18日 火曜日 午前11時7分 1 10 Number buttons and other component controls Use the number buttons to directly select a radio frequency (page 33) or the tracks on a CD, etc. There are other buttons that can be accessed after RECEIVER is pressed. (For example MIDNIGHT, etc.) EQ – Press to switch on/off Acoustic Calibration EQ setting (page 36). PHASE – Press to switch on/off Phase Control (page 36).
VSX-1023_823_UCSMXCN_En.book 11 ページ 2012年12月18日 火曜日 午前11時7分 Chapter 2 Connecting your equipment By connecting the left and right front speakers (L/R), the center speaker (C), the left and right surround speakers (SL/ SR), the left and right surround back speakers (SBL/SBR) (or the left and right front height speakers (FHL/FHR)), and the subwoofer (SW), a surround sound system up to 7.1 channel can be enjoyed. The 5.1 channel surround system is the most commonly-used in home theaters.
VSX-1023_823_UCSMXCN_En.book 12 ページ 2012年12月18日 火曜日 午前11時7分 2 Connecting your equipment Some tips for improving sound quality Where you put your speakers in the room has a big effect on the quality of the sound. The following guidelines should help you to get the best sound from your system. • It is best to angle the speakers towards the listening position. The angle depends on the size of the room. Use less of an angle for bigger rooms.
VSX-1023_823_UCSMXCN_En.book 13 ページ 2012年12月18日 火曜日 午前11時7分 2 Connecting your equipment CAUTION 4 VSX-1023 connection diagram The front height terminals can also be used for Speaker B. • These speaker terminals carry HAZARDOUS LIVE voltage. To prevent the risk of electric shock when connecting or disconnecting the speaker cables, disconnect the power cord before touching any uninsulated parts.
VSX-1023_823_UCSMXCN_En.
VSX-1023_823_UCSMXCN_En.book 15 ページ 2012年12月18日 火曜日 午前11時7分 2 Switching the speaker terminal VSX-1023: When the The Speaker System setting (VSX-1023 only) on page 52 is set to SPB, each press of the speaker button will switch the speaker used for playback: SP, SPA, SPB, SPAB. VSX-823: Each press of the speaker button will switch the speaker used for playback: SP, SPA.
VSX-1023_823_UCSMXCN_En.book 16 ページ 2012年12月18日 火曜日 午前11時7分 2 Connecting your equipment • 3D, Deep Color, x.v.Color, 4K signal transfer and Audio Return Channel are only possible when connected to a compatible component. • HDMI format digital audio transmissions require a longer time to be recognized. Due to this, interruption in the audio may occur when switching between audio formats or beginning playback.
VSX-1023_823_UCSMXCN_En.book 17 ページ 2012年12月18日 火曜日 午前11時7分 2 Connecting a TV and playback components Connecting your equipment DVD player 4 HDMI/DVI-compatible components Blu-ray Disc player Connecting using HDMI If you have an HDMI or DVI (with HDCP) equipped component (Blu-ray Disc player, etc.), you can connect it to this receiver using a commercially available HDMI cable.
VSX-1023_823_UCSMXCN_En.book 18 ページ 2012年12月18日 火曜日 午前11時7分 2 Connecting your equipment Connecting your TV with no HDMI input This diagram shows connections of a TV (with no HDMI input) and DVD player (or other playback component) to the receiver. • With these connections, the picture is not output to the TV even if the DVD player is connected with an HDMI cable. Connect the DVD player’s video signals using a composite cable.
VSX-1023_823_UCSMXCN_En.book 19 ページ 2012年12月18日 火曜日 午前11時7分 2 Connecting your equipment Connecting optional Bluetooth® ADAPTER When the Bluetooth ADAPTER (Pioneer Model No. AS-BT100 or AS-BT200) is connected to this unit, a product equipped with Bluetooth wireless technology (portable cell phone, digital music player, etc.) can be used to listen to music wirelessly. Connect a Bluetooth ADAPTER to the ADAPTER PORT terminal on the rear panel.
VSX-1023_823_UCSMXCN_En.book 20 ページ 2012年12月18日 火曜日 午前11時7分 2 Connecting your equipment Using external antennas Connecting antennas Connect the AM loop antenna and the FM wire antenna as shown below. To improve reception and sound quality, connect external antennas (see Using external antennas below). fig. a Connecting an IR receiver (VSX-1023 only) To improve FM reception Use an F connector (not supplied) to connect an external FM antenna. fig.
VSX-1023_823_UCSMXCN_En.book 21 ページ 2012年12月18日 火曜日 午前11時7分 2 Connecting your equipment Connecting an iPod This receiver has a dedicated iPod/iPhone/iPad terminals that will allow you to control playback of audio content from your iPod using the controls of this receiver. • iPod recharging occurs whenever an iPod is connected to this unit. (Recharging is enabled only when the unit’s power is turned on.) • For instructions on playing the iPod, see Playing an iPod on page 27.
VSX-1023_823_UCSMXCN_En.book 22 ページ 2012年12月18日 火曜日 午前11時7分 2 Connecting your equipment Connecting an MHL-compatible device An MHL-compatible mobile device can be connected to enjoy full-HD videos, high quality multi-channel audio, and photos etc., with charge the battery on the receiver. Use the MHL cable (sold separately) to connect the device.
VSX-1023_823_UCSMXCN_En.book 23 ページ 2012年12月18日 火曜日 午前11時7分 Chapter 3 Basic Setup Automatically setting up for surround sound (MCACC) The Auto Multi-Channel ACoustic Calibration (MCACC) setup measures the acoustic characteristics of your listening area, taking into account ambient noise, speaker size and distance, and tests for both channel delay and channel level.
VSX-1023_823_UCSMXCN_En.book 24 ページ 2012年12月18日 火曜日 午前11時7分 3 Basic Setup for the test tones to finish. 7 Wait A progress report is displayed on-screen while the receiver outputs test tones to determine the speakers present in your setup. Try to be as quiet as possible while it’s doing this. sure ‘OK’ is selected, then press ENTER. 9 Make If the screen in step 8 is left untouched for 10 seconds and ENTER is not pressed in step 9, the Auto MCACC setup will start automatically as shown. 1 .
VSX-1023_823_UCSMXCN_En.book 25 ページ 2012年12月18日 火曜日 午前11時7分 Chapter 4 Basic playback Playing a source Here are the basic instructions for playing a source (such as a DVD disc) with your home theater system. RECEIVER SLEEP SOURCE AUDIO PARAMETER RECEIVER TOOLS MENU TUNE TOP MENU HOME MENU PTY iPod CTRL ENTER TUNE PRESET PRESET INPUT BAND RETURN MUTE on your system components and receiver.
VSX-1023_823_UCSMXCN_En.book 26 ページ 2012年12月18日 火曜日 午前11時7分 4 • When digital input (optical or coaxial) is selected, this receiver can only play back Dolby Digital, PCM (32 kHz to 96 kHz) and DTS (including DTS 96 kHz/24 bit) digital signal formats. The compatible signals via the HDMI terminals are: Dolby Digital, DTS, SACD (DSD 2 ch only), PCM (32 kHz to 192 kHz sampling frequencies), Dolby TrueHD, Dolby Digital Plus, DTS-EXPRESS, DTS-HD Master Audio and DVD Audio (including 192 kHz).
VSX-1023_823_UCSMXCN_En.book 27 ページ 2012年12月18日 火曜日 午前11時7分 4 Basic playback Tip • In order to enjoy the picture and/or sound from devices connected to each terminal, select the input by doing the following. Audio DVD SAT/CBL CD TV SAT/CBL BD GAME DVR/BDR NETWORK RECEIVER SIGNAL SEL 3 VSX-823 Video ADAPTER C1 Audio SAT/CBL DVD 1. 2.
VSX-1023_823_UCSMXCN_En.book 28 ページ 2012年12月18日 火曜日 午前11時7分 4 Basic playback When the display shows the names of folders and files, you’re ready to play music from the iPod. • If after pressing iPod/USB the display shows NO DEVICE, try switching off the receiver and reconnecting the iPod to the receiver. • The controls of your iPod will be inoperable when connected to this receiver. To navigate songs on your iPod, you can take advantage of the OSD of your TV connected to this receiver.
VSX-1023_823_UCSMXCN_En.book 29 ページ 2012年12月18日 火曜日 午前11時7分 4 Basic playback When the display shows the names of folders and files, you’re ready to play from the USB device. If a USB Error message lights in the display, try following the points below: • Switch the receiver off, then on again. • Reconnect the USB device with the receiver switched off. • Select another input source (like BD), then switch back to iPod/USB. • Use a dedicated AC adapter (supplied with the device) for USB power.
VSX-1023_823_UCSMXCN_En.book 30 ページ 2012年12月18日 火曜日 午前11時7分 4 Basic playback FLAC .flacc Sampling frequency 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz Quantization bitrate 16 bit, 24 bit Channel 2 ch AIFF .aif .aiff Sampling frequency 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz Quantization bitrate 16 bit, 24 bit Channel 2 ch Apple Lossless .m4 .mp4 Sampling frequency 32 kHz, 44.1 kHz, 48 kHz, 88.
VSX-1023_823_UCSMXCN_En.
VSX-1023_823_UCSMXCN_En.book 32 ページ 2012年12月18日 火曜日 午前11時7分 4 Basic playback Switch on the Bluetooth wireless technology device 5 that you want to make pairing, place it near the system and set it into the pairing mode. Check to see that the Bluetooth ADAPTER is detected by 6 the Bluetooth wireless technology device. When Bluetooth wireless technology device is connected: Bluetooth wireless technology device name appears in the receiver display. • The system can display alphanumeric characters only.
VSX-1023_823_UCSMXCN_En.book 33 ページ 2012年12月18日 火曜日 午前11時7分 4 Basic playback Improving FM sound Listening to the radio The following steps show you how to tune in to FM and AM radio broadcasts using the automatic (search) and manual (step) tuning functions. Once you are tuned to a station you can memorize the frequency for recall later—see Saving station presets below for more on how to do this. AUDIO PARAMETER BAND to select FM MONO.
VSX-1023_823_UCSMXCN_En.book 34 ページ 2012年12月18日 火曜日 午前11時7分 Chapter Choosing the listening mode This receiver offers a variety of listening modes to accommodate playback of various audio formats. Choose one according to your speaker environment or the source. listening to a source, press the listening mode While button repeatedly to select a listening mode you want.
VSX-1023_823_UCSMXCN_En.book 35 ページ 2012年12月18日 火曜日 午前11時7分 5 Listening to your system a. If surround back channel processing (page 36) is switched off, or the surround back speakers are set to NO, DOLBY PLIIx becomes DOLBY PLII (5.1 channel sound). b. You can also adjust the C.WIDTH, DIMEN., and PNRM. effect (see Setting the Audio options on page 37). c. In case of VSX-1023: You can also adjust the H.GAIN effect (see Setting the Audio options on page 37). d. You can also adjust the C.
VSX-1023_823_UCSMXCN_En.book 36 ページ 2012年12月18日 火曜日 午前11時7分 5 Listening to your system You can listen to sources using the Acoustic Calibration Equalization set in Automatically setting up for surround sound (MCACC) on page 23. Refer to these pages for more on Acoustic Calibration Equalization. RECEIVER SLEEP listening to a source, press , then press While PHASE to switch the P.CTL (Phase Control) ON or OFF.
VSX-1023_823_UCSMXCN_En.book 37 ページ 2012年12月18日 火曜日 午前11時7分 5 Listening to your system • Depending on the positions of the speakers and the sound source, in some cases it may not be possible to achieve good results. In this case, set the setting to OFF. UP MIX OFF UP MIX ON L SW C R L SW C Setting/What it does Important • Note that if a setting doesn’t appear in the AUDIO PARAMETER menu, it is unavailable due to the current source, settings and status of the receiver.
VSX-1023_823_UCSMXCN_En.book 38 ページ 2012年12月18日 火曜日 午前11時7分 5 Listening to your system Setting/What it does Option(s) Setting/What it does DRC (Dynamic Range Control) Adjusts the level of dynamic range for movie soundtracks optimized for Dolby Digital, DTS, Dolby Digital Plus, Dolby TrueHD, DTS-HD and DTS-HD Master Audio (you may need to use this feature when listening to surround sound at low volumes).
VSX-1023_823_UCSMXCN_En.book 39 ページ 2012年12月18日 火曜日 午前11時7分 Chapter 6 Playback with NETWORK features Introduction This receiver is equipped with the LAN terminal and you can enjoy the following features by connecting your components to these terminals.
VSX-1023_823_UCSMXCN_En.book 40 ページ 2012年12月18日 火曜日 午前11時7分 6 This receiver features “HTC Connect”, a simple way to enjoy music content from your HTC Connect certified smart phone. 1 HTC Connect music streaming provided on this product has been developed based on interoperability testing as defined by the HTC Connect Certification program with the HTC Connect-compatible smartphones. 2 Music Navigation via the music progress bar is not currently supported with HTC Connect.
VSX-1023_823_UCSMXCN_En.book 41 ページ 2012年12月18日 火曜日 午前11時7分 6 Listening to Internet radio stations Internet radio is an audio broadcasting service transmitted via the Internet. There are a large number of Internet radio stations broadcasting a variety of services from every corner of the world. Some are hosted, managed, and broadcast by private individuals while others are by the corresponding traditional terrestrial radio stations or radio networks.
VSX-1023_823_UCSMXCN_En.book 42 ページ 2012年12月18日 火曜日 午前11時7分 6 Playback with NETWORK features Playing back audio files stored on components on the network This unit allows you to play music on media servers connected on an identical Local Area Network (LAN) as the receiver.
VSX-1023_823_UCSMXCN_En.book 43 ページ 2012年12月18日 火曜日 午前11時7分 6 Playback with NETWORK features Friendly Name ‘Network Configuration’ from the Network Language 1 Select Setup menu. ‘Network Configuration’ from the Network Language can be set on the NETWORK function OSD screen. 1 Select Setup menu. Select ‘IP Address, Proxy’ from the Network 2 Configuration menu. 1 Select ‘Language’ from the Network Setup menu. ‘Friendly Name’ from the Network Configuration 2 Select menu. 2 Select the language you want.
VSX-1023_823_UCSMXCN_En.book 44 ページ 2012年12月18日 火曜日 午前11時7分 6 Playback with NETWORK features ‘Firmware Update’ from the Network Setup 1 Select menu. The receiver checks whether the USB memory device inserted into the USB port on the receiver’s front panel contains updatable firmware. 2 To update, select ‘Start’. ‘Updating in progress, don’t unplug!’ is 3 When displayed, select ‘Start’. • If ‘File Not Found’ is displayed, try the following: - No update file was found on the USB memory device.
VSX-1023_823_UCSMXCN_En.book 45 ページ 2012年12月18日 火曜日 午前11時7分 6 Playback with NETWORK features 3 Click Firmware Update. the latest firmware on your computer (a) and 5 Browse then press Upload (b). The extension of the firmware is fw. Please select a file that has the fw extension. The confirmation screen is displayed. If you continue the firmware update, press OK. Once the firmware update process starts, you can't stop it.
VSX-1023_823_UCSMXCN_En.book 46 ページ 2012年12月18日 火曜日 午前11時7分 6 About network playback Playback with NETWORK features DLNA Disclaimer for Third Party Content The network playback function of this unit uses the following technologies: Windows Media Player See Windows Media Player 11/Windows Media Player 12 on page 47 for more on this.
VSX-1023_823_UCSMXCN_En.book 47 ページ 2012年12月18日 火曜日 午前11時7分 6 About playback behavior over a network • Playback may stall when the PC is switched off or any media files stored on it are deleted while playing content. • If there are problems within the network environment (heavy network traffic, etc.) content may not be displayed or played properly (playback may be interrupted or stalled). For best performance, a 100BASE-TX connection between player and PC is recommended.
VSX-1023_823_UCSMXCN_En.book 48 ページ 2012年12月18日 火曜日 午前11時7分 6 Playback with NETWORK features AAC (MPEG-4 AAC LC, MPEG-4 HE AAC (aacPlus v1/2)) About playable file formats The NETWORK feature of this receiver supports the following file formats. Note that some file formats are not available for playback although they are listed as playable file formats. Also, the compatibility of file formats varies depending on the type of server.
VSX-1023_823_UCSMXCN_En.book 49 ページ 2012年12月18日 火曜日 午前11時7分 Chapter 7 Home Menu Using the Home Menu The following section shows you how to make detailed settings to specify how you’re using the receiver, and also explains how to fine-tune individual speaker system settings to your liking. Important • The OSD will not appear if you have connected using the composite output to your TV. Use HDMI connection for Home Menu. • If headphones are connected to the receiver, disconnect them.
VSX-1023_823_UCSMXCN_En.book 50 ページ 2012年12月18日 火曜日 午前11時7分 7 • Center – Select LARGE if your center speaker reproduces bass frequencies effectively, or select SMALL to send bass frequencies to the other speakers or subwoofer. If you didn’t connect a center speaker, choose NO (the center channel is sent to the other speakers). • Front Height (VSX-1023 only) – Select LARGE if your front height speakers reproduce bass frequencies effectively.
VSX-1023_823_UCSMXCN_En.book 51 ページ 2012年12月18日 火曜日 午前11時7分 7 Home Menu your selected setup option. 4 Confirm The test tones will start after you press ENTER. After the volume increases to the reference level, test tones will be output. 2c . Channel Level Test Tone [ Manual ] Please Wait . . .20 Caution Loud test tones will be output. Return Tip • You can change the channel levels at any time by press RECEIVER , then press CH SELECT and LEV +/– on the remote control.
VSX-1023_823_UCSMXCN_En.book 52 ページ 2012年12月18日 火曜日 午前11時7分 7 Home Menu 2 Select ‘Component Input’ from the Input Assign menu. 3b . Co mp o n e n t I n p u t 3 . Input Assign Comp o n e n t a . Analog Input b . Component Input DV D The Network Standby menu The MHL Setup menu This setting allows the AirPlay function for operating the receiver from a computer connected on the same LAN as the receiver to be used even when the receiver is in the standby mode.
VSX-1023_823_UCSMXCN_En.book 53 ページ 2012年12月18日 火曜日 午前11時7分 7 Home Menu • SP-B – Enables Speaker B to be installed in another room so that the sound of the stereo can be enjoyed elsewhere. • Bi-Amp – Enables higher quality playback sound through the front speakers with the connection of biamp speakers. • ZONE 2 – In a separate room (subzone) from which the receiver is located (main zone), one can enjoy playback of a device connected to the receiver (multi-zone function).
VSX-1023_823_UCSMXCN_En.book 54 ページ 2012年12月18日 火曜日 午前11時7分 Chapter 8 Using the MULTI-ZONE feature (VSX-1023 only) • When the receiver is on, make sure that any operations for the sub zone are done while ZONE lights in the display. If this is not showing, the front panel controls affect the main zone only. If the receiver is in standby, the display is dimmed, and ZONE continues to light in the display.
VSX-1023_823_UCSMXCN_En.book 55 ページ 2012年12月18日 火曜日 午前11時7分 Chapter 9 Control with HDMI function Synchronized operations below with a Control with HDMIcompatible Pioneer TV or Blu-ray Disc player are possible when the component is connected to the receiver using an HDMI cable. • Synchronized amp mode The receiver’s volume can be set and the sound can be muted using the TV’s remote control.
VSX-1023_823_UCSMXCN_En.book 56 ページ 2012年12月18日 火曜日 午前11時7分 9 Control with HDMI function • LAST – The HDMI input signal selected previously will be output. This can only be selected when Control is set to OFF. • BD, DVD, SAT/CBL, DVR/BDR, HDMI/MHL, GAME – The HDMI input signal selected here will be output. This can only be selected when Control is set to OFF. • OFF – Signal will not be output during standby.
VSX-1023_823_UCSMXCN_En.book 57 ページ 2012年12月18日 火曜日 午前11時7分 Chapter 10 Controlling the rest of your system Setting the remote to control other components Most components can be assigned to one of the input function buttons using the component’s manufacturer preset code stored in the remote.
VSX-1023_823_UCSMXCN_En.book 58 ページ 2012年12月18日 火曜日 午前11時7分 10 Controlling the rest of your system Controls for TVs Controls for other components Preset Code List This remote control can control components (TV, DTV, Satellite TV or Cable TV) after entering the proper codes (see Controlling the rest of your system on page 57 for more on this). Use the input function buttons to select the component.
VSX-1023_823_UCSMXCN_En.
VSX-1023_823_UCSMXCN_En.book 60 ページ 2012年12月18日 火曜日 午前11時7分 10 BD If operations are not possible using the preset codes below, you may be able to conduct operations with the preset codes for the DVD, DVR (BDR, HDR).
VSX-1023_823_UCSMXCN_En.
VSX-1023_823_UCSMXCN_En.book 62 ページ 2012年12月18日 火曜日 午前11時7分 Chapter 11 Additional information Troubleshooting Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong with this component, check the points below. Take a look at the other components and electrical appliances being used, because sometimes the problem may lie there.
VSX-1023_823_UCSMXCN_En.book 63 ページ 2012年12月18日 火曜日 午前11時7分 11 After using the Auto MCACC setup, the speaker size setting (LARGE or SMALL) is incorrect. Low-frequency noise could have been caused by an air conditioner or motor. Switch off all appliances in the room and rerun the Auto MCACC setup. Can’t operate the remote control. Replace the batteries (page 10). Operate within 7 m (23 ft.), 30º of the remote sensor (page 10). Remove the obstacle or operate from another position.
VSX-1023_823_UCSMXCN_En.book 64 ページ 2012年12月18日 火曜日 午前11時7分 11 Cannot access Windows Media Player 11 or Windows Media Player 12. In case of Windows Media Player 11: You are currently logged onto the domain through your PC with Windows XP or Windows Vista installed. Instead of logging onto the domain, log onto the local machine (page 40). In case of Windows Media Player 12: You are currently logged onto the domain through your PC with Windows 7 installed.
VSX-1023_823_UCSMXCN_En.book 65 ページ 2012年12月18日 火曜日 午前11時7分 11 About iPod/iPhone/iPad Additional information Apple Lossless Audio Codec Copyright © 2011 Apple Inc. All rights reserved. Licensed under the Apache License, Version 2.0. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0. AirPlay works with iPhone, iPad, and iPod touch with iOS 4.3.3 or later, Mac with OS X Mountain Lion, and Mac and PC with iTunes 10.2.2 or later.
VSX-1023_823_UCSMXCN_En.book 66 ページ 2012年12月18日 火曜日 午前11時7分 11 Additional information Resetting the main unit VSX-1023 VSX-1023 Use this procedure to reset all the receiver’s settings to the factory default. Use the front panel controls to do this. • For instructions on resetting the network connection settings, see Factory Reset on page 45. 1 Switch the receiver into standby. holding down BAND, press and hold 2 While STANDBY/ON for about two seconds.
VSX-1023_823_UCSMXCN_En.book 67 ページ 2012年12月18日 火曜日 午前11時7分 11 Specifications Amplifier section Continuous average power output of 80 watts* per channel, min., at 8 ohms, from 20 Hz to 20 000 Hz with no more than 0.08 %** total harmonic distortion. Front (stereo) . . . . . . . . . . . . . . . . . . . . . . . . . . 80 W + 80 W Power output (1 kHz, 6 , 1 %) . . . . . . . . . 140 W per channel Guaranteed speaker impedance . . . . . . . . . . . . . . .
VSX-1023_823_UCSMXCN_En.book 68 ページ 2012年12月18日 火曜日 午前11時7分 To register your product, find the nearest authorized service location, to purchase replacement parts, operating instructions, or accessories, please go to one of following URLs : Pour enregistrer votre produit, trouver le service après-vente agréé le plus proche et pour acheter des pièces de rechange, des modes d’emploi ou des accessoires, reportez-vous aux URL suivantes : In the USA/Aux Etats-Unis http://www.pioneerelectronics.