Owner's Manual
Table Of Contents
- Operation Manual
- Reset
- Clock Set
- Demo Mode
- Table of Contents
- Removing / Attaching Front Panel
- Parking Brake Interlock
- Touch Panel Calibration
- Parts & Controls
- Operation
- Basic Operation
- Tuner
- Playing Video
- Playing Audio
- Playing Still Images
- Bluetooth (130P5200BT)
- Introduction
- Calling a Number in the Phone Book
- Selecting a Number by Alphabet Search Mode
- Using the Missed, Received and Dialed Call Lists
- Setting Automatic Answering
- Adjusting the Other Party’s Listening Volume
- Ring Tone On / Off
- Using the Preset Dial Lists
- Making a Call by Entering Phone Number
- Setting the Private Mode
- Pairing from This Unit
- Using a Bluetooth Device to Pair
- Connecting to a Bluetooth Device Automatically
- Switching Visible Unit
- Displaying BD (Bluetooth Device) Address
- Entering PIN Code for Bluetooth Wireless Connection
- Registering a Connected Cellular Phone
- Bluetooth (130AVHP520 - Adapter Required)
- Introduction of Bluetooth Telephone Operations
- Bluetooth Audio Operations
- Setting Up for Bluetooth Audio
- Using the Missed, Received and Dialed Call Lists
- Setting Automatic Answering
- Switching the Ring Tone
- Using a Cellular Phone to Initiate a Connection
- Voice Recognition
- Connecting a Bluetooth Audio Player
- Connecting to a Bluetooth Device Automatically
- Displaying BD (Bluetooth Device) Address
- XM / SIRIUS Tuner
- HD Radio Tuner
- Using the AUX Sources
- Advanced Operations
- Tuner
- HD Radio
- iTunes Tagging
- Switching the Media File Type
- Operating the DVD Menu
- Operating This Unit’s iPod Function from your iPod
- Random
- Repeat
- Playing Videos from your iPod
- Browsing on the iPod
- DVD-Video Playback Options
- PBC Playback
- Selecting Tracks from the Track Title List
- Selecting Files from the File Name List
- Advanced Sound Retriever
- Audiobook Speed
- iPod Link Search
- DivX VOD Content
- Capture an Image in JPEG Files
- Changing the Wide Screen Mode
- XM / SIRIUS
- Changing the Picture Adjustment
- Setting Rear Monitor Output
- Touch Panel Calibration
- Using the AUX Sources
- Menu Operations
- Overview
- Common Menu Operations
- Audio Adjustments
- Setting Up the DVD Player
- System Settings
- AUX Source On / Off
- AV Input On / Off
- Rear Output & Subwoofer Controller
- Mute / Attenuation Settings
- Changing Languages for CAUTION
- Menu Language
- Clearing Bluetooth Memory (130P5200BT Only)
- Updating Bluetooth Connection Software (130P5200BT Only)
- Displaying the Bluetooth System Version (130P5200BT Only)
- Adjusting LCD Panel Slide Position
- Setting Automatic Open Function
- Switching the Warning Tone
- Rear View Camera
- Auto EQ
- Entertainment (Display) Settings
- Customizing Menus
- Troubleshooting
- Error Messages
- Specs
- Installation Manual
- Warranty
Removing the front panel
% Pinch the top and bottom of its right
side and pull the front panel out.
Take care not pinch it too tightly or to drop it,
and also avoid contact with water or other
fluids to prevent permanent damage.
Re-attaching the front panel
1 Slide the front panel to the left.
Front panel and the head unit are connected
on the left side. Make sure that the front panel
has been properly connected to the head unit.
2 Press the right side of the front panel
until it is firmly seated.
# If you can’t attach the front panel to the head
unit successfully, try again. However, forcing the
front panel into place may result in damage.
Resetting the microprocessor
By pressing RESET, you can reset the micro
processor to its initial settings without chan
ging the bookmark information.
The microprocessor must be reset in the fol
lowing situations:
! Before using this unit for the first time after
installation
! If the unit fails to operate properly
! When strange or incorrect messages ap
pear on the display
1 Turn the ignition switch OFF.
2 Press RESET with a pen tip or other
pointed instrument.
For this function, verify the following section
before operation. Refer to this page.
RESET button
Note
Switch your engine ON or set the ignition switch
to ACC ON before pressing RESET in the follow
ing situations:
! After completing connections
! When erasing all stored settings
! When resetting the unit to its initial (factory)
settings
Feature demo mode
The feature demo automatically starts when
you select Off for the source and continues
while the ignition switch is set to ACC or ON.
To cancel the feature demo, press and hold
MUTE/
. Press and hold MUTE/ again to
restart. Operating the feature demo while the
car engine is turned off it may drain the bat
tery power.
Important
Failure to connect the red lead (ACC) of this unit
to a terminal coupled with ignition switch on/off
operations may lead to battery drain.
Adjusting the response
positions of the touch panels
(Touch Panel Calibration)
If you feel that the touch panel keys on the
screen deviate from the actual positions that
respond to your touch, adjust the response po
sitions of the touch panel. Refer to Adjusting
the response positions of the touch panels
(Touch Panel Calibration) on page 70.
En
9
Section
02
Before You Start
Before You Start