Operation Manual

The “System” screen appears.
3 Touch [Input/Output Settings].
4 Touch [AV Input].
The pop-up menu appears.
5 Touch the item you want to set.
! Off (default):
Deactivates the AV source.
! Source:
Displays the video image output by the con-
nected external device.
! Camera:
Displays the image output by the connected
external camera.
p If “Camera” is selected, “2nd Camera
Input” is automatically set to “On”.
p If “Off” or “Source” is selected, “2nd Cam-
era Input” is automatically set to “Off”.
Setting the rear view camera
The following two functions are available. A se-
parately sold rear view camera (e.g. ND-BC6)
is required for utilising the rear view camera
function. (For details, consult your dealer.)
Rear view camera
This product features a function that automati-
cally switches to the full-screen image of the
rear view camera installed on your vehicle.
When the gearstick is in the REVERSE (R) po-
sition, the screen automatically switches to
full-screen rear view camera image.
p If the gearstick is aligned to the REVERSE
(R) position immediately after the system of
this product is started up, only the camera
image will be displayed and the parking as-
sist guidelines will not be displayed. The
parking assist guidelines will be displayed
on the camera image after a little while. Be
sure to check the conditions around the ve-
hicle even before the guidelines and the
message are displayed.
Camera for Camera View mode
Camera View can be displayed at all times
(e.g. when monitoring an attached trailer,
etc.). Please note that with this setting, the
camera image is not resized to fit, and that a
portion of what is seen by the camera is not
viewable.
CAUTION
Check to make sure settings for rear view camera
displays a mirror reversed image.
p Immediately verify whether the display
changes to a rear view camera image when
the gearstick is aligned to REVERSE (R)
from another position.
p When the screen changes to full-screen
rear view camera image during normal
driving, switch to the opposite setting in
“Camera Polarity”.
Setting rear view camera
activation
To view images of the rear view camera on the
screen of this product, “Back Camera Input”
needs to be set to “On”.
1 Press the HOME button to display the
Top menu screen.
2 Touch the following keys in the follow-
ing order.
The “System” screen appears.
3 Touch [Camera settings].
4 Touch [Back Camera Input] repeatedly
until the desired setting appears.
! Off (default):
Turns the back camera input setting off.
! On:
Turns the back camera input setting on.
Engb
100
Chapter
20
System settings