Operation Manual

Setting the keyboard
language with the
application for iPhone
You can use the keyboard in AppRadio Mode
by setting the language of the keyboard for
iPhone.
p This function is only available in AppRadio
Mode on the iPhone.
1 Press the HOME button to display the
Top menu screen.
2 Touch the following keys in the follow-
ing order.
The “System” screen appears.
3 Touch [Keyboard].
The pop-up menu appears.
4 Touch the desired language.
After the language is selected, the previous
screen returns.
Setting the beep sound
1 Press the HOME button to display the
Top menu screen.
2 Touch the following keys in the follow-
ing order.
The “System” screen appears.
3 Touch [Beep Tone] repeatedly until the
desired setting appears.
! On (default):
Sounds a beep.
! Off:
Does not sound a beep.
Adjusting the response
positions of the touch panel
(touch panel calibration)
If you feel that the touch panel keys on the
screen deviate from the actual positions that
respond to your touch, adjust the response po-
sitions of the touch panel screen.
p This setting is available only when you stop
your vehicle in a safe place and apply the
handbrake.
p Do not use sharp pointed tools such as a
ballpoint or mechanical pen, which could
damage the screen.
p Do not turn off the engine while saving the
adjusted position data.
1 Press the HOME button to display the
Top menu screen.
2 Touch the following keys in the follow-
ing order.
The “System” screen appears.
3 Touch [Touch Panel Calibration].
The touch panel adjustment screen appears.
4 Touch two corners of the screen along
the arrows, and then touch the centres of
two + marks at the same time twice.
5 Press the HOME button.
The adjustment results are saved.
6 Press the HOME button once again.
Proceed to 16-point adjustment.
# If you press and hold the HOME button, the
adjustment is cancelled.
7 Gently touch the centre of the + mark
displayed on the screen.
The target indicates the order.
After you touch all marks, the adjusted posi-
tion data is saved.
# If you press the HOME button, the previous
adjustment position returns.
Engb
106
Chapter
20
System settings