English AVIC-8200NEX AVIC-7200NEX AVIC-6200NEX AVIC-5200NEX MULTIMEDIA NAVIGATION RECEIVER Operation Manual Notice to all users: This software requires that the product is properly connected to your vehicle’ s parking brake and depending on your vehicle, additional installation may be required. For more information, please contact your Authorized Pioneer Electronics retailer or call us at (800) 421-1404.
Contents Thank you for buying this Pioneer product. Please read through these instructions so you will know how to operate your model properly. After you have finished reading the instructions, keep this document in a safe place for future reference. Important The screens shown in the examples may differ from actual screens, which may be changed without notice for performance and function improvements. ■ Precaution...........................4 Notes on internal memory.................................
Contents Adjusting the volume.......................................51 ■ Pandora ® ...........................52 Using Pandora................................................53 Starting procedure..........................................53 Selecting a Pandora station from the list.........53 Adding a station..............................................53 ■ Bluetooth audio player.....54 Starting procedure..........................................54 Selecting files from the file name list...............
Precaution Notes on internal memory Meanings of Symbols Used in This Manual Before removing the vehicle battery If the battery is disconnected or discharged, the memory will be erased and must be reprogrammed. Some of the settings and recorded contents will not be reset. X0000BT This indicates to touch an appropriate soft key on the touch screen. Data subject to erasure The information is erased by disconnecting the yellow lead from the battery (or removing the battery itself).
Basic operation Checking part names and functions 8200NEX 3 7200NEX 4 5 1 2 3 4 5 9 a b 8 5200NEX 7 2 3 4 5 6 c d 1 LCD screen 2 VOL (+/–) button button 9 7 Press to display the top menu screen. Press and hold to activate the voice recognition function. Refer to Using the voice recognition function on page 33 Press to switch between the Application screen and the AV operation screen. Press to turn the display off.
Basic operation 2 Touch or LCD panel. 10 FOLDER/P. Press to select the next or previous title or CH folder. Press to recall radio station frequencies assigned to preset channel keys. Press to answer or end a call. 11 AUDIO Press to change the audio language during DVD playback. 3 Touch Press to change the viewing angle during DVD playback. 12 BAND/ ESC Press to select the tuner band when tuner is selected as a source.
Basic operation Inserting and ejecting an SD memory card 8200NEX 7200NEX p This system is not compatible with the Multi Media Card (MMC). p Compatibility with all SD memory cards is not guaranteed. p This product may not achieve optimum performance with some SD memory cards. Inserting an SD memory card 1 Press the 2 Touch button. to open the LCD panel. 3 Insert an SD memory card into the SD card slot. 4 Press the 2 Touch 1 Start the engine to boot up the system.
Basic operation How to use the screens Application menu screen Application operation screen Time and date setting screen Setting menu screen Top menu screen AV operation screen Map screen Phone menu screen Favorite source icons Navigation menu screen 8 AV source selection screen
Basic operation p By pressing the button on any screen you can display the top menu screen. p The character string “APPS” is replaced with “Apple CarPlay” when Apple CarPlay is running. p 8200NEX/7200NEX The character string “APPS” is replaced with “Android Auto” when Android Auto is running. p If you select “Power OFF” on the AV source selection screen, you can turn off almost all functions. The “Power OFF” mode is released in the following cases: — An incoming call is received.
Basic operation Common touch panel keys How to use the Navigation menu screen Operating the on-screen keyboard : Returns to the previous screen. : Closes the screen. 1 2 Operating list screens 1 Searches for your destination by the address or coordinates, or searches for the selected place of interest, etc. 2 3 3 1 Touching an item on the list allows you to narrow down the options and proceed to the next operation. 2 Appears when all characters are not displayed on the display area.
How to use the Navigation menu screen 1 Configures the navigation-related settings. 2 You can also access the “SyncTool” screen from this menu. 2 Displays route alternatives, parts of the route to avoid, or specific roads in your planned route to avoid. 3 Suspends and resumes the route guidance. 4 Displays the route in its full length on the map, and displays route parameters and route alternatives. 5 Deletes your route or removes a waypoint.
How to use the map Smart Zoom Most of the information provided by your navigation system can be seen on the map. You need to become familiar with how information appears on the map. How to read the map screen 1 2 3 4 9 1 5 6 7 8 p The following information marked with an asterisk (*) appears only when a route is set. p Depending on the conditions and settings, some items may not be displayed. 1 Shows the number and name of the street to be used (or next guidance point).
How to use the map Scrolling the map to the position you want to see 1 Press the MAP button. 2 Touch anywhere on the map or touch and drag the map in the desired direction to scroll. If you place the cursor on the desired location, a brief overview about the location will appear at the top of the screen, showing the street name and other information for the location. 3 Touch . The map returns to the current position. p If you press the MAP button, the map returns to the current position.
How to use the map p If the data for these items is not contained in the map data, the information is not available even if there are signs on the actual road. When you set “Offer Freeway Services” to “on”, the icon appears while you are driving on freeways. Touch the icon to open the details of the next few exits or service stations. In addition, touch an item to show its location on the map. You can set it as a waypoint easily.
Searching for a destination p Depending on the search results, some steps may be skipped. 1 Press the MAP button and touch . 2 Touch [New Route]. 3 Touch [Address]. 4 Touch the following text box and set the destination you are looking for. Country: By default, your navigation system proposes the country where you are. If you want to change the area to search set another country. City or ZIP code: By default, your navigation system proposes the city/town where you are.
Searching for a destination Searching for providers nearby that offer emergency or roadside assistance services Never use this product to route to hospitals, police stations or similar facilities in an emergency. Stop using any functions relating to the hands-free phoning and please call the appropriate emergency number. You can search for locations that provide emergency or roadside assistance in the surrounding areas. p This information does not necessarily correspond to actual information.
Searching for a destination When entering the coordinates in UTM format, touch , then [UTM Coordinates]. 1 2 3 4 6 Enter the longitude value and touch [Go!]. p When a value is already entered in the text field, delete the value first. The searched location appears on the map screen. 7 Touch [Select as Destination], and then touch [Start Navigation]. Your navigation system starts the route guidance. 4 Touch the right text box to enter the country and city/town.
Checking and modifying the current route Modifying the route When navigation is already started, there are several ways to modify the current route. The following sections describe some of those options. Building a route using “Route Planner” The “Route Planner” (or “My Route”) feature lets you build your route using the list of destinations. Editing the list allows you to plan your route easily. p Once you set the route, you can edit your route using the menu displayed as “My Route”.
Checking and modifying the current route For information about route calculation conditions, refer to Route Planning Method on page 25 1 Press the MAP button and touch 3 5 Touch [Select]. 3 Touch one of the options. The selected route is applied as your current route. If there are no waypoints on the route, touch [Cancel Route] to cancel the route. If there are waypoints on the route, touch [Cancel Route] to cancel the route. Touch [Delete Waypoint] to delete only the nearest waypoint.
Registering and editing locations and routes Storing a location in “Saved Location” Storing your favorite locations in “Saved Location” allows you to save the time and effort used on re-entering this information. “Saved Location” can include your home location, workplace, and places you have already registered. Storing your home and your workplace location You can store one home location and one workplace location. 1 Press the MAP button and touch . 2 Touch [New Route], and then [Saved Location].
Registering and editing locations and routes Saving a location as an alert point Important The warning for road safety cameras (like speed cameras) is disabled when you are in certain countries where warnings for road safety cameras are prohibited. However, you are fully responsible for ensuring that this feature is legal in the country where you intend to use it. You can save any map location (such as a school zone or railroad crossing) as an alert point.
Receiving real-time traffic information (TMC) (street names) where incidents have occurred are displayed on the list. p If a route is set, relevant events for your current route are shown in the upper section of the list. p Touching the desired item allows you to check its position on the map. Touch or to show the previous or next event. 1 Displaying the “Useful Information” menu The “Useful Information” menu contains various information to support your driving.
Checking useful information about your trip Trip Monitor: Checks the statistical data of your trips (for example, start time, end time, average speed, etc.). Refer to Recording your travel history on page 23 GPS Information: Displays the GPS information screen with satellite position and signal strength information. Fuel Consumption: You can estimate the fuel cost to your destination by entering the fuel consumption information in the navigation system.
Checking useful information about your trip Setting the initial odometer value Refer to Displaying the “Useful Information” menu on page 22 Before you use the fuel consumption feature, enter the initial odometer value from which you want to start measuring the mileage. 2 Touch [Fuel Consumption]. 1 Display the “Useful Information” menu. 4 Touch [Maintenance Schedule]. Refer to Displaying the “Useful Information” menu on page 22 2 Touch [Fuel Consumption]. 3 Touch [Initial Odometer Value].
Customizing preferences of the navigation Refer to the manual for AVICSYNC on our website Trip Monitor: Turns automatic trip log saving on or off and checks the current size of the trip database. Refer to “Trip Monitor” settings on page 28 AVICSYNC Displays the connection method for AVICSYNC. p The setting value is fixed. Use this product as it is. Connected Services: Enables or disables the connected services.
Customizing preferences of the navigation Car Shuttle Trains When this function is turned off, the route is calculated prioritising the avoidance of car shuttle trains. Car shuttle trains are used to transport vehicles for relatively short distances and they usually connect places that are not easily accessible by road. Carpool Lanes When this function is turned off, the route is calculated prioritizing the avoidance of carpool and HOV lanes.
Customizing preferences of the navigation “Navigation Map” settings Map Display You can see the effect when you change a setting. Viewpoint You can adjust the basic zoom and tilt levels to your needs. Some preset levels are available. If you select “Manual”, you can store adjusted map scales and view angles. Color Mode You can switch between daytime and nighttime color modes or let the software switch between the two modes automatically a few minutes before sunrise and a few minutes after sunset.
Customizing preferences of the navigation p This system may not support all the listed units in some voice guidance languages. Distance The unit of distance can be changed. Fuel Economy The unit of fuel mileage can be changed. Weight The unit of weight can be changed. Temperature The unit of temperature can be changed. Coordinate Display Format The format of the coordinates can be changed. Currency The currency unit can be set.
Customizing preferences of the navigation 3 Touch [Warnings]. 4 Touch [Alert Points]. 5 Touch [Alert Point Warnings] to turn it on. 6 Touch the item you want to set. Alert Types Sets the type of alert point. Speed Camera Types Sets the type of speed camera. 7 Touch any of the items to change the setting. 8 Touch [Warning Type] and then touch one of the options. The following alert types are available: Disabled: The system does not warn you of the alert points for this category.
Customizing preferences of the navigation AVICSYNC compatibility AVICSYNC is available for the following models. p Depending on the software version of the iPhone and Android, it may not be compatible with this product. For latest compatibility with this product and AVICSYNC App, refer to the information on our website. iPhone models iPhone 6 Plus: iOS 8.x iPhone 6: iOS 8.x iPhone 5s: iOS 7.x, 8.x iPhone 5c: iOS 7.x, 8.x iPhone 5: iOS 7.x, 8.x iPhone 4s: iOS 7.x, 8.x iPhone 4: iOS 6.
Bluetooth® connection Setting Bluetooth device auto connection This function connects the last connected Bluetooth device to this product with the Hands-Free Profile automatically as soon as the devices is less than a few meters apart. The default setting is “On”. Switching visibility Updating Bluetooth software This function sets whether or not to make this product visible to the other device. The default setting is “On”. This function is used to update this product with the latest Bluetooth software.
Hands-free phoning The dial screen appears and dialing starts. *2 1 Press the Using the preset dial lists *3 2 Touch *1 *4 button. . Making a phone call *5 *6 You can make a phone call in many different ways. . p To end the call, touch Direct dialing 3 Touch . 2 Touch Dialing from the preset dial list 1 Display the phone menu screen. Switches to the phone book list. Refer to Calling a number in the phone book on page 32 *3 Switches to the missed, received and dialed call lists.
Hands-free phoning Minimizing the dial confirmation screen 1 Touch off. p The dial confirmation screen cannot be minimized on the AV operation screen. p AV sources cannot be selected even if the dial confirmation screen is minimized while talking on the phone or receiving an incoming call. Adjusting the other party’s listening volume 1 Touch . Touch again.
Setup for iPod / iPhone or smartphone When using an iPod / iPhone or a smartphone with this product, configure the settings of this product according to the device to be connected. This section describes the settings required for each device. The basic flow of iPod / iPhone or smartphone setup 1 Select the method for connecting your device. Refer to Setting the device connection method on page 34 2 Connect your device to this product. Refer to the Installation Manual.
Setup for iPod / iPhone or smartphone Information on the connections and functions for each device The settings and cables required for connecting each device, and the available sources are as follows.
Setup for iPod / iPhone or smartphone iPod / iPhone with a Lightning connector Available sources iPod (audio) — — (*1) — (*1) iPod (video) — — — (*1) — (*1) Pandora AppRadio Mode — — Apple CarPlay — (*3) — — AVICSYNC App (*1) Use AppRadio Mode to play music or videos on an iPod / iPhone. For using AppRadio Mode, install the CarMediaPlayer app on your iPod / iPhone. For details about the CarMediaPlayer, refer to the information on our website.
Radio 5200NEX Displays the preset channel list. Select an item on the list ( “1” to “6” ) to switch to the preset channel. Selects the FM1, FM2, FM3 or AM band. Stores song information to an iPod. Refer to Storing song information to an iPod (iTunes® Tagging) on page 74 p By pressing the or button, you can also switch the preset channels. or button and p By pressing and holding the release, you can also perform seek tuning. Starting procedure 1 Display the AV source selection screen.
HD Radio™ 8200NEX 7200NEX AM band 6200NEX Analog AM Switches the text display between the main channel and sub channels. Analog AM Digital AM Displays the preset channel list. Select an item on the list ("1" to "6") to switch to the preset channel. FM band Analog FM Selects the FM1, FM2, FM3 or AM band. Performs manual tuning. HOLD Performs seek tuning or non stop seek tuning. Releasing the key in a few seconds, skips to the nearest station from the current frequency.
Disc HD Radio™ Tuning into strong frequencies Visual information related to content being played on your HD Radio receiver, such as Album Art, historical photographs, still art from live broadcasts, among other related content. Local seek tuning allows you to only tune into those radio stations with sufficiently strong signals. The default setting is “Off”. p This setting is available only when “HD Radio” is selected as the source. Audio source screen 1 *1 1 Display the “Radio Settings” screen.
Disc Plays tracks in random order. Hides the touch panel keys. This function is available for music CD. : Does not play tracks in random order. Performs frame-by-frame playback. : Plays all tracks in random order. Audio source screen 2 Video source screen 2 To display again the keys, touch anywhere on the screen. HOLD Performs slow-motion playback. Each time you touch it changes the speed in four steps in the following order: 1/16 →1/8 → 1/4 → 1/2 Video source screen 1 Sets a repeat play range.
Disc Video source screen 2 *6 *5 Switches the subtitle/audio language. Refer to Switching the subtitle/audio language on page 41 *6 Displays the DVD menu keypad. Refer to Operating the DVD menu using touch panel keys on page 42 or button, you can also skip files/ p By pressing the chapters forward or backward. or button, you can p By pressing and holding the also perform fast reverse or fast forward. appears.
Disc Compressed files Operating the DVD menu using touch panel keys Audio source screen 1 (Example: USB) *1 *2 If items on the DVD menu appear, the touch panel keys may overlay them. If so, select an item using those touch panel keys. 1 Touch . 2 Touch item. , 3 Touch . , or *3 Plays files in random order. : Does not play files in random order. : Plays all files within the repeat range in random order.
Compressed files Hides the touch panel keys. Video source screen (Example: Disc) Hides the touch panel keys. To display again the keys, touch anywhere on the screen. To display again the keys, touch anywhere on the screen. Rotates the displayed picture 90° clockwise. Video source screen (Example: Disc) Selects the previous or next folder. *3 Still image screen *4 *5 Performs fast reverse or fast forward. *3 Touch again to change the playback speed. Sets a repeat play range.
Compressed files Still image screen *4 Performs fast reverse or fast forward. Touch again to change the playback speed. Switches between playback and pause. *4 Switches the media file type. Refer to Switching the media file type on page 44 *5 Switches the subtitle/audio language. p This function is available only for compressed video files stored on a disc.
Compressed files p This function is available for the external storage device (USB, SD) only. 1 Touch . iPod p This setting is available during playback of the JPEG files. 1 Display the “Video Setup” screen. Audio source screen 1 *1 2 Touch the “Tag” tab. *2 3 Touch the desired category to display the file list. 4 Touch the item. Refine the item until the desired song title or file name is displayed on the list. 5 Touch the desired song title or file name to play back.
iPod Changes the audiobook speed. 1 : Normal playback 2 : Fast playback 1/2 : Slow-motion playback Hides the touch panel keys. Video source screen Sets the shuffle play. *2 : Plays randomly songs or videos within the selected list. *3 : Plays album randomly. Audio source screen 2 Performs fast reverse or fast forward. Apple Music Radio screen *2 : Repeats all in the selected list. *2 Selects a song or video from the list.
iPod Refer to Selecting the video for the rear display on page 75 Starting procedure p When connecting an iPhone or iPod touch, quit all applications before connecting the device. 1 Connect your iPod. Refer to Connecting your iPod on page 46 2 Display the AV source selection screen. p This function is not available when using iPod function with an iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, or iPod touch (5th generation).
AppRadio Mode Smartphone (Android) models Displays the launcher application screen. Displays the previous screen. For details about Android device compatibility with this product, refer to the information on our website. Using AppRadio Mode You can control applications for an iPhone or a smartphone directly from the screen (AppRadio Mode). In AppRadio Mode, you can operate applications with finger gestures such as tapping, dragging, scrolling or flicking on the screen of this product.
AppRadio Mode The AppRadio app is launched, and the AppRadio Mode screen (Application menu screen) appears. Using the keyboard (for iPhone users) When you tap the text input area of an application for iPhone, a keyboard will be displayed on the screen. You can input the desired text directly from this product. p This function may not be available depending on your iPhone. p This function is only available in AppRadio Mode on the iPhone.
Apple CarPlay You can control applications for an iPhone directly from the screen (Apple CarPlay). In Apple CarPlay, you can operate applications with finger gestures such as tapping, dragging, scrolling or flicking on the screen of this product. p This function is only available when using iPod function with an iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, or iPhone 5.
Android Auto™ 8200NEX 7200NEX You can control applications for a smartphone directly from the screen (Android Auto). In Android Auto, you can operate applications with finger gestures such as tapping, dragging, scrolling or flicking on the screen of this product. p Android devices running Android 5.0 or higher are compatible with Android Auto. WARNING Certain uses of a smartphone may not be legal while driving in your jurisdiction, so you must be aware of and obey any such restrictions.
Android Auto™ p You cannot adjust the volume of the main sound on the screen. Press the VOL (+/–) button to adjust the volume of the main sound. 3 Adjusts the guidance volume and alert sound volume. p Each touch of [+] or [–] increases or decreases the volume level. Pandora® Gives a “Thumbs Down” to the playing track and skips to the next track. Displays the preset station list. Select an item on the list ("1" to "6") to switch to the preset station.
Pandora® p By pressing the button, you can skip songs forward. and are not available when using a shared station. p WARNING Certain uses of an iPhone or a smartphone may not be legal while driving in your jurisdiction, so you must be aware of and obey any such restrictions. If in doubt as to a particular function, only perform it while the car is parked. No feature should be used unless it is safe to do so under the driving conditions you are experiencing.
Bluetooth audio player Playback screen 1 p p p p p Skips files forward or backward. Plays files in random order. Playback screen 2 — A2DP and AVRCP (Audio/Video Remote Control Profile): Playing back, pausing, selecting songs, etc., are possible. Depending on the Bluetooth audio player connected to this product, some functions may not be available. While you are listening to songs on your Bluetooth device, please refrain from operating the phone function as much as possible.
SiriusXM® Satellite Radio Switches to the time bar display (Replay™ mode). *1 Current channel display (live broadcast mode) Recalls the preset channel stored to a key from memory. Stores the current broadcast HOLD frequency to a key. Time bar display (Replay™ mode) Selects a band. *3 Memorizes the current channel content information for the alert function. Refer to Memorizing the current contents on page 57 Stores song information to an iPod.
SiriusXM® Satellite Radio Subscribing to the SiriusXM Satellite Radio service 1 Select SiriusXM as the source. Refer to Starting procedure on page 55 You should be able to tune in to Channel 1. If you cannot get Channel 1, ensure that your SiriusXM Connect Vehicle Tuner is installed correctly. 2 Switch to Channel 0 and check the Radio ID. You will need this number to activate your subscription. p Note that the SiriusXM Radio ID does not include the letters I, O, S or F.
SiriusXM® Satellite Radio Locking the channel Using SportsFlash™ 1 Display the “SiriusXM Settings” screen. SportsFlash™ will notify you when a big play happens during a game with one of your favorite sports teams. You can select whether or not to hear the play. In addition, you can select whether to continue listening to the notified game or to return to the previous channel you were listening to. p SXV300 or later SiriusXM Connect vehicle tuner (sold separately) is required to use this function.
SiriusXM® Satellite Radio Touch [Delete All] to delete all items memorized to the alert list. If you touch and hold the list item, you can delete the item from the list. Selecting teams for Game Alert Setting Featured Band Update Message 1 Display the “SiriusXM Settings” screen. 2 Touch [Featured Band Update Messages] to switch “On” or “Off”. 2 Touch [Team Settings]. Restoring the “SiriusXM Settings” to the default 4 Select a team.
AUX source AV input Hides the touch panel keys. Hides the touch panel keys. To display again the keys, touch anywhere on the screen. To display again the keys, touch anywhere on the screen. 5 Touch [AUX]. Setting the video signal When you connect this product to an AUX equipment, select the suitable video signal setting. The default setting is “Auto”. p You can operate this function only for the video signal input into the AUX input. 1 Display the “Video Setup” screen.
AV input MIXTRAX 3 Touch [AV]. 4 Touch the item. The following items are available: Auto, PAL, NTSC, PAL-M, PAL-N, SECAM. 6 Touch [AV]. Starting procedure (for camera) Exits the MIXTRAX screen. Displays the LinkGate screen. Touch the desired item. Songs related to the selected item are played. You can display the image output by the camera connected to video input. Refer to the Installation Manual. 1 Display the “System” setting screen. 2 Touch [Input/Output Settings]. 3 Touch [AV Input].
MIXTRAX Starting procedure Specifies the BPM. 1 Insert the SD memory card into the SD card slot or plug the USB storage device into the USB connector. *1 *2 2 Touch [AV Source Settings]. Refer to Inserting and ejecting an SD memory card on page 7 Refer to Plugging and unplugging a USB storage device on page 7 3 Touch [MIXTRAX Settings]. 2 Display the AV source selection screen. The flashing color changes with the changes in the sound and bass levels. The default setting is “Sound1”.
iDatalink Displays the Vehicle Information screen. Displays the Gauges screen. Car Features screen (Example: Gauges) Displays the Parking Assist screen. Displays the Climate screen. your Maestro RR module. For troubleshooting information about iDatalink functions, visit the following website. http://maestro.idatalink.com/support Limitations: The iDatalink list screen can be scrolled up or down by page.
iDatalink System settings Displaying the “System” setting screen 1 Press the 2 Touch button. , and then . Setting the navigation information bar Vehicle Information screen Displaying the setting screen for iDatalink p Functions and displays vary depending on the connected type of iDatalink adapter and the vehicle model. 1 Display the “System” setting screen. Climate screen 2 Touch [OEM Settings]. You can set whether to display the guidance information of the navigation on the AV operation screen.
System settings Setting the ever scroll When “Ever Scroll” is set to “On”, the recorded text information scrolls continuously in the display while the vehicle is stopped. The default setting is “Off”. 1 Display the “System” setting screen. Refer to Displaying the “System” setting screen on page 63 2 Touch [Ever Scroll] to switch “On” or “Off”. Setting the beep tone The default setting is “On”. 1 Display the “System” setting screen.
System settings 2 Using packing tape or similar, place markings as follows. 2 m (6 ft. 7 in.) 50 cm (1 ft. 8 in.) 25 cm (9-7/8 in.) Setting the reversed image Selecting the system language The default setting is “Off”. p This setting is available only when you stop your vehicle in a safe place and apply the parking brake. p This function is available when “AV Input” is set to “Camera” or “2nd Camera Input” is set to “On”.
System settings 3 Touch two corners of the screen along the arrows, and then touch the centers of two + marks at the same time twice. 4 Press the button. 1 Display the “System” setting screen. The adjustment results are saved. 5 Press the button once again. Proceed to 16-point adjustment. 6 Gently touch the center of the “+” mark displayed on the screen. The target indicates the order. When you press the button, the previous adjustment position returns.
System settings Displaying the open source licenses You can check the open source licenses of the functions that this product is equipped with. Follow the on-screen instructions to finish updating the firmware. p If an error message appears on the screen, touch the display and perform the above steps again. 1 Display the “System” setting screen. Checking sensor learning status and driving status 2 Touch [System Information]. You can check the sensor learning status, such as the degree of learning.
Audio adjustments Displaying the “Audio” setting screen 1 Press the 2 Touch button. , and then . Using fader/balance adjustment Adjusting the cutoff frequency value You can adjust the cutoff frequency value of each speaker. The following speakers can be adjusted: Front, Rear, Subwoofer p “Rear” is available only when “Rear Speaker” is set to “On”. Refer to Setting the rear speaker output on page 68 p “Subwoofer” is available only when “Subwoofer” is set to “On”.
Audio adjustments Adjusting the speaker output levels finely Fine adjustments of the speaker output level can be made by listening to audio output. 1 Display the “Audio” setting screen. Refer to Displaying the “Audio” setting screen on page 68 2 Touch [Speaker Level]. 3 Touch [<] or [>] to select the listening position if necessary. The following items are available: Off, Front-L, Front-R, Front, All. p The default setting is “Off”.
Audio adjustments power to car phones or cellular phones in the vehicle, or remove them in advance. Surrounding sounds may prevent correct measurement of the vehicle’s acoustics. Be sure to use the microphone for acoustical measurement (sold separately). Using another microphone may prevent measurement, or result in incorrect measurement of the vehicle’s acoustics. To perform Auto EQ, the front speakers must be connected.
Theme menu Displaying the “Theme” setting screen Refer to Displaying the “Theme” setting screen on page 71 1 Press the 5 Touch the desired external storage device. 2 Touch button. , and then . 3 Touch [Background]. 4 Touch . 6 Touch the image. Selecting the wallpaper Setting the illumination color The wallpaper can be selected from some preset items. Furthermore, you can set your original pictures. The illumination color can be selected from some preset colors.
Theme menu Changing to the splash screen stored on the external storage device CAUTION Do not turn off the engine while importing an image from the external storage device. 1 Set the external storage device. Refer to Inserting and ejecting an SD memory card on page 7 Refer to Plugging and unplugging a USB storage device on page 7 2 Display the “Theme” screen. Refer to Displaying the “Theme” setting screen on page 71 3 Touch [Splash Screen]. 4 Touch . 5 Touch the desired external storage device.
Video settings Setting the aspect ratio There are two kinds of displays. A wide screen display has a width-to-height ratio (TV aspect) of 16:9, while a regular display has a TV aspect of 4:3. If you use a regular rear display with a TV aspect of 4:3, you can set the aspect ratio suitable for your rear display. (We recommend use of this function only when you want to fit the aspect ratio to the rear display.) The default setting is “16:9”.
Favorite menu Registering your favorite menu items in shortcuts allows you to quickly jump to the registered menu screen by a simple touch on the “Favorites” screen. p Up to 12 menu items can be registered in the favorite menu. Creating a shortcut 1 Display the setting menu screen. 2 Touch the star icon of the menu item. The star icon for the selected menu is filled in. To cancel the registration, touch the star icon in the menu column again.
Other functions p (*1) 5200NEX p (*2) 8200NEX/7200NEX/6200NEX Setting the password 1 Display the “System” setting screen. Refer to Displaying the “System” setting screen on page 63 2 Touch [AV Source Settings]. 3 Touch [Tag Forwarding] to select the USB port you use. 4 Tune into the broadcast station. Radio (*1) Refer to Radio on page 37 HD Radio(*2) Refer to HD Radio™ on page 38 SiriusXM Refer to SiriusXM® Satellite Radio on page 55 5 Touch the song information.
Other functions 4 Touch [Yes]. 5 Touch [OK]. 6 Enter the current password. 7 Touch [Go]. A message indicating that the security setting is canceled appears. Restoring this product to the default settings You can restore settings or recorded content to the default settings. Various methods are used to clear user data. Method 1: Remove the vehicle battery p Some of the settings and recorded contents will not be reset.
Appendix The picture is extremely unclear/distorted and dark during playback. The disc features a signal to prohibit copying. (Some discs may have this.) — Since this product is compatible with the copy guard analog copy protect system, the picture may suffer from horizontal stripes or other imperfections when a disc with that kind of protection signal is viewed on some displays. This is not a malfunction. iPod cannot be operated. The iPod is frozen.
Appendix Pandora Error-19 (Communication error occurred.) Communication failed. — Disconnect the cable from the iPod. Once the iPod’s main menu is displayed, reconnect the iPod and reset it. Skip limit reached. Skip limit reached. — Do not exceed the skip limit. — Pandora limits the total number of skips per hour. Please sign in to your Pandora account You are not logged in to the Pandora application. — Please log in to the Pandora application.
Appendix Unable to write to flash memory. The playback history for VOD contents cannot be saved for some reason. — Retry. — If the message appears frequently, consult your dealer. Your device is not authorized to play this DivX protected video. This product’s DivX registration code has not been authorized by the DivX VOD contents provider. — Register this product to the DivX VOD contents provider. Video frame rate not supported DivX file’s frame rate is more than 30 fps.
Appendix Apple CarPlay Attempting to connect to Apple CarPlay. Communication failed and the system is trying to connect. Wait for a while. Then, perform the actions below if the error message is still displayed. — Restart the iPhone. — Disconnect the cable from the iPhone, and then connect the iPhone again after a few seconds. — Turn the ignition switch to OFF and then to ON.
Appendix When driving among high buildings p Some types of vehicles may not output a speed signal while driving at just a few kilometers per hour. In such a case, the current location of your vehicle may not be displayed correctly while in traffic congestion or in a parking lot. How do GPS and dead reckoning work together? For maximum accuracy, your navigation system continually compares GPS data with your estimated position as calculated from the data of built-in sensor.
Appendix If there is a parallel road. If you take a ferry. If you drive in zigzags. If there is another road very nearby, such as in the case of an elevated freeway. If the road has a series of hairpin bends. If you are driving on a long, straight road or a gently curving road. If you take a recently opened road that is not on the map. If there is a loop or similar road configuration. 82 If you are on a steep mountain road with many height changes.
Appendix If you enter or exit a multi-storey parking lot or similar structure using a spiral ramp. If you join the road after driving around a large parking lot. If you put on chains, or change your tires for ones with a different size. If your vehicle is turned on a turntable or similar structure. If trees or other obstacles block the GPS signals for a considerable period. When you drive around a traffic circle. When starting driving immediately after starting the engine.
Appendix Route setting information Route search specifications Your navigation system sets a route to your destination by applying certain built-in rules to the map data. This section provides some useful information about how a route is set. CAUTION When a route is calculated, the route and voice guidance for the route are automatically set. Also, for day or time traffic regulations, only information about traffic regulations applicable at the time when the route was calculated is considered.
Appendix Playing DualDisc DualDiscs are two-sided discs that have a recordable CD for audio on one side and a recordable DVD for video on the other. Playback of the DVD side is possible with this product. However, since the CD side of DualDiscs is not physically compatible with the general CD standard, it may not be possible to play the CD side with this product. Frequent loading and ejecting of a DualDisc may result in scratches to the disc.
Appendix DRM rental files cannot be operated until playing back is started. This product corresponds to a DivX file display of up to 1 590 minutes 43 seconds. Search operations beyond this time limit are prohibited. DivX VOD file playback requires supplying the ID code of this product to the DivX VOD provider. Regarding the ID code, refer to Displaying your DivX VOD registration code on page 73.
Appendix USB storage device/SD memory card File extension: .aac, .adts, .mka, .m4a Bit rate: 8 kbps to 320 kbps (CBR) Sampling frequency: 8 kHz to 48 kHz Maximum resolution: 720 pixels × 480 pixels Maximum frame rate: 30 fps Maximum file size: 4 GB Maximum playback time: 150 minutes FLAC compatibility .mp4 Compatible video codec: MPEG-4/H.264/H.
Appendix Sirius, XM and all related marks and logos are trademarks of SiriusXM Radio, Inc. All rights reserved. HD Radio™ Technology HD Radio Technology manufactured under license from iBiquity Digital Corporation. U.S. and Foreign Patents. HD Radio ™ and the HD, HD Radio, and “Arc” logos are proprietary trademarks of iBiquity Digital Corp.
Appendix Please note that the use of this accessory with iPod or iPhone may affect wireless performance. iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. Lightning Lightning is a trademark of Apple Inc. App Store App Store is a service mark of Apple Inc. iOS iOS is a trademark on which Cisco holds the trademark right in the US and certain other countries. iTunes iTunes is a trademark of Apple Inc., registered in the U.S.
Appendix Notice regarding video viewing Remember that use of this system for commercial or public viewing purposes may constitute an infringement on the author’s rights as protected by the Copyright Law. Notice regarding DVD-Video viewing This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited.
Appendix Antenna.................... Micro strip flat antenna/right-handed helical polarization Antenna cable......................................................3.55 m (11 ft. 7 in.) Dimensions (W × H × D)...................33 mm × 14.7 mm × 36 mm (1-1/4 in. × 1/2 in. × 1-3/8 in.) Weight......................................................................... 73.7 g (0.2 lbs) Display 8200NEX/7200NEX Screen size/aspect ratio ...... 6.95 inch wide/16:9 (effective display area: 156.6 mm × 81.
To keep up to date with the latest navigational data, you can periodically update your navigation system. For further details, please visit: http://pioneer.naviextras.com © 2016 PIONEER CORPORATION. All rights reserved. < KOKZ15L > PIONEER CORPORATION 1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, JAPAN PIONEER ELECTRONICS (USA) INC. P.O. Box 1540, Long Beach, California 90801-1540, U.S.A. TEL: (800) 421-1404 PIONEER ELECTRONICS OF CANADA, INC.
Quick Start Guide MULTIMEDIA NAVIGATION RECEIVER AVIC-6200NEX/AVIC-5200NEX This guide is intended to guide you through the basic functions of this navigation system. For details, please refer to the Operation Manual provided with the product. Basic hardware buttons 1 $ button 2 VOL (+/–) button Press to adjust the AV (Audio and Video) source volume. 3 MAP button Press to display the Map screen. 4 button Press to display the Top menu screen. © 2016 PIONEER CORPORATION. All rights reserved.
Switching screens using the touch panel keys Switching screens using the hardware buttons
How to use the navigation menu screens You can use various functions such as the route guidance and related settings. 1 2 3 4 5 6 7 8 9 1 Returns to the Map screen. 2 Searches for your destination by the address or coordinates, or searches for the selected place of interest, etc. 3 Builds your route or edits the route currently set. 4 Displays the traffic information. 5 Displays useful information to support your driving. 6 Displays notifications that contain important information.
Searching for a location by address 1 Press the MAP button. The Map screen appears. 2 to display the Touch navigation menu on the Map screen. 3 Touch [New Route]. 4 Touch [Address]. The “Find Address” screen appears. 5 6 After a short summary of the route parameters, a map appears showing the entire route. The route is automatically calculated. Input the information for the location you want to set as the destination.
How to use the map Most of the information provided by your navigation system can be seen on the map. You need to become familiar with how the information appears on the map. The following information marked with an asterisk (*) appears only when a route is set. AV information is displayed at the bottom of the Map screen. 1 Shows the number and name of the street to be used (or next guidance point).* 2 Shows the next guidance point (maneuver).* 3 Shows the distance to the next guidance point (maneuver).
Pairing your Bluetooth® devices You can use various functions (hands-free phoning and Bluetooth audio etc.) by connecting your Bluetooth devices to this navigation system. To use the functions, pair the devices with the navigation system in advance. 1 Activate the Bluetooth wireless technology on your devices. 2 Press the button to display the Top menu screen. 3 and then . Touch The “Bluetooth” screen appears. 4 Touch [Connection]. 5 Touch .
Using hands-free phoning If your cellular phone features Bluetooth technology, this navigation system can be connected to your cellular phone wirelessly. Using this hands-free function, you can operate the navigation system to make or receive phone calls. You can also transfer the phone book data stored in your cellular phone to the navigation system. 1 Displays the preset dial screen. 2 Switches to the phone book list. 3 Switches to the missed, received and dialed call lists.
Using the radio You can listen to the radio using this product. Once you have stored broadcast channels, you can easily recall preset channels from memory with a single touch of a key. AVIC-6200NEX 1 Displays the source list. 2 Selects a band. 3 Displays the Time and date setting screen. 4 Displays the Setting menu screen. 5 Recalls equalizer curves. 6 Switches the text display between the main channel and sub channels. 7 Displays the Phone menu screen. 8 Stores song information to an iPod.
Black plate (1,1) English Installation Manual Manuel d’installation Français MULTIMEDIA NAVIGATION RECEIVER RÉCEPTEUR DE NAVIGATION MULTIMÉDIA AVIC-8200NEX AVIC-7200NEX AVIC-6200NEX AVIC-5200NEX 1
Black plate (2,1) Contents Precautions Your new product and this manual 3 Important safeguards 3 Connection Precautions before connecting the system 5 Before installing this product 5 To prevent damage 6 – Notice for the blue/white lead 6 Parts supplied 7 Connecting the power cord (1) 8 Connecting the power cord (2) 10 Connecting the system 12 Connecting to separately sold power amp 14 Connecting an iPod / iPhone or an Android device 15 Connecting an iPhone with Lightning connector 16 – Connecting via the
Black plate (3,1) Section Precautions 01 English Your new product and this manual Important safeguards ! The navigation features of this product (and the rear view camera option if purchased) are intended solely to aid you in the operation of your vehicle. It is not a substitute for your attentiveness, judgment and care when driving. ! Never use this product to route to hospitals, police stations, or similar facilities in an emergency. Please call the appropriate emergency number.
Black plate (4,1) Section 01 Precautions ! Certain country and government laws may prohibit or restrict the placement and use of this product in your vehicle. Please comply with all applicable laws and regulations regarding the use, installation and operation of this product.
Black plate (5,1) Section Connection WARNING Do not take any steps to tamper with or disable the parking brake interlock system which is in place for your protection. Tampering with or disabling the parking brake interlock system could result in serious injury or death. CAUTION ! If you decide to perform the installation yourself, and have special training and experience in the mobile electronics installations, please carefully follow all of the steps in the installation manual.
Black plate (6,1) Section 02 Connection To prevent damage WARNING ! Use speakers over 50 W (maximum input power) and between 4 W to 8 W (impedance value). Do not use 1 W to 3 W speakers for this product. ! The black cable is ground. When installing this product or power amp (sold separately), make sure to connect the ground wire first. Ensure that the ground wire is properly connected to metal parts of the car’s body.
Black plate (7,1) Section Connection Parts supplied Parts marked (*) are supplied with AVIC8200NEX, AVIC-7200NEX and AVIC-6200NEX. This product English ! Be sure not to use this lead as the power supply lead for the auto-antenna or antenna booster. Such connection could cause excessive current drain and malfunction. 02 Power cord GPS antenna Mini-jack extension cable Lock tie* Microphone USB cable Metal sheet Clamp (3 pcs.
Black plate (8,1) Section 02 Connection Connecting the power cord (1) Yellow To terminal supplied with power regardless of ignition switch position. Red To electric terminal controlled by ignition switch (12 V DC) ON/OFF. Orange/white To lighting switch terminal. Black (ground) To vehicle (metal) body. With a two-speaker system, do not connect anything to the speaker leads that are not connected to speakers.
Black plate (9,1) Section Connection 02 English This product 14 cm (5-1/2 in.) Power supply Yellow/black (MUTE) If you use equipment with a mute function, connect that equipment to the Audio Mute lead. If not, keep the Audio Mute lead free of any connections. Power cord Fuse (10 A) Note Audio source will be set to mute or attenuate, while the following sounds will not be muted or attenuated. For details, refer to Operation Manual.
Black plate (10,1) Section 02 Connection Connecting the power cord (2) Pink (CAR SPEED SIGNAL INPUT) This product is connected here to detect the distance the vehicle travels. Always connect the vehicle’s speed detection circuit. Failure to make this connection will increase errors in the vehicle’s location display.
Black plate (11,1) Section Connection 02 English This product Power supply Power cord Violet/white (REVERSE-GEAR SIGNAL INPUT) This is connected so that this product can detect whether the vehicle is moving forwards or backwards. Connect the violet/white lead to the lead whose voltage changes when the shift lever is put in reverse.
Black plate (12,1) Section 02 Connection Connecting the system iDatalink adapter input Please refer to the instruction manual for the iDatalink adapter (sold separately).* This product SiriusXM Connect Vehicle Tuner Please refer to the instruction manual for SiriusXM Connect Vehicle Tuner (sold separately). Antenna jack 3 m (9 ft. 10 in.) Wired remote input Please refer to the instruction manual for the Hard-wired remote control adapter (sold separately). Vehicle antenna GPS antenna 3.55 m (11 ft.
Black plate (13,1) Section Connection 02 English Note * Before using and/or connecting the iDatalink Maestro adapter, you will need to first flash the Maestro module with the appropriate vehicle and head unit firmware. You can find the device number that is required for the activation on the followings (refer to Operation Manual.
Black plate (14,1) Section 02 Connection Connecting to separately sold power amp Power amp (sold separately) RCA cables Rear outputs (REAR OUTPUT) (sold separately) Power amp (sold separately) 15 cm (5-7/8 in.) Power amp (sold separately) Front outputs (FRONT OUTPUT) This product Power supply White, Red (SWL, SWR) Power cord Blue/white To system control terminal of the power amp (max. 300 mA 12 V DC).
Black plate (15,1) Section Connection 02 Find your device and the function you want to operate from the list below, and refer to the page for the connection. p Depending on the device, some functions may not be available. English Connecting an iPod / iPhone or an Android device iPhone (5, 5c, 5s, 6, 6 Plus)/iPod touch (5th generation) iPod (audio) Apple CarPlay Pandora AVICSYNC App AppRadio Mode Pandora AVICSYNC App Refer to Connecting via the USB port (iPhone) on page 16.
Black plate (16,1) Section 02 Connection Connecting an iPhone with Lightning connector Connecting via the HDMI port (iPhone) 8200NEX 7200NEX 6200NEX Notes ! For details on how to connect an external device using a separately sold cable, refer to the manual for the cable. ! For details concerning the connection, operations and compatibility of iPhone, refer to Operation Manual. Connecting via the USB port (iPhone) The following cables are required for the connection.
Black plate (17,1) Section Connection 02 English USB port 1 Note This product ® ! When you connect the High Speed HDMI Cable, use the lock tie to fix it securely. = For details, refer to Securing the High ® Speed HDMI Cable on page 20. Connecting via the RGB input (iPhone) RGB input 5200NEX The following cables are required for the connection.
Black plate (18,1) Section 02 Connection Connecting via the AUX input (iPhone) Connecting via the RGB input (iPhone) The USB interface cable for iPod / iPhone (CDIU201V) (sold separately) is required for the connection. The USB interface cable for iPod / iPhone (CDIU201S) (sold separately) is required for the connection. USB port 1 USB port 2 This product AUX input Mini-jack extension cable 2 m (6 ft. 7 in.
Black plate (19,1) Section Connection 02 English Connecting the Android™ device Connecting via the MHL port (Android device) 8200NEX 7200NEX 6200NEX This product App Connectivity Kit (CD-AH200) (sold separately) is required for the connection. Notes ! For details on how to connect an external device using a separately sold cable, refer to the manual for the cable. ! For details concerning the connection and operations of Android device, refer to Operation Manual.
Black plate (20,1) Section 02 Connection Connecting via the USB port (Android device) Securing the High Speed HDMI® Cable The USB interface cable for use with Android devices (CD-MU200) (sold separately) is required for the connection. 8200NEX 7200NEX 6200NEX This product Be sure to fix the High Speed HDMI® Cable with the lock tie, when you connect the external device with the High Speed HDMI® Cable. 1 Insert the High Speed HDMI® Cable into the HDMI port.
Black plate (21,1) Section Connection 02 English Connecting a rear view camera Rear view camera (ND-BC8) (sold separately) When this product is used with a rear view camera, it is possible to automatically switch from the video to rear view image when the shift lever is moved to REVERSE (R). Camera View mode also allows you to check what is behind you while driving. To video output RCA cable (supplied with ND-BC8) WARNING USE INPUT ONLY FOR REVERSE OR MIRROR IMAGE REAR VIEW CAMERA.
Black plate (22,1) Section 02 Connection Connecting the external video component Connecting the video component This product Using AV input You can connect an external video component or external camera to this product. Connecting an external camera This product 15 cm (5-7/8 in.) 23 cm (9 in.) Yellow (VIDEO INPUT) Red, white (AUDIO INPUT) RCA cables (sold separately) 15 cm (5-7/8 in.
Black plate (23,1) Section Connection 02 CAUTION This product AUX input Be sure to use a mini-jack AV cable (CD-RM10) (sold separately) for wiring. If you use other cables, the wiring position might differ resulting in disturbed images and sounds. English Using an AUX input OK L V G R Mini-jack AV cable (CD-RM10) (sold separately) L: R: V: G V R G: L Left audio (White) Right audio (Red) Video (Yellow) Ground Mini-jack extension cable 2 m (6 ft. 7 in.
Black plate (24,1) Section 02 Connection Connecting an HDMI device Connecting the rear display 8200NEX 7200NEX 6200NEX This product This product Yellow (V OUT) Rear audio output HDMI port Mini pin plug cable (sold separately) High Speed HDMI® Cable (sold separately) To audio inputs HDMI device (sold separately) Notes ! For details concerning the operations of HDMI device, refer to Operation Manual. ! When you connect the High Speed HDMI® Cable, use the lock tie to fix it securely.
Black plate (25,1) Section Installation CAUTION ! Never install this product in places where, or in a manner that: — Could injure the driver or passengers if the vehicle stops suddenly. — May interfere with the driver’s operation of the vehicle, such as on the floor in front of the driver’s seat, or close to the steering wheel or shift lever. ! Make sure there is nothing behind the dashboard or paneling when drilling holes in them.
Black plate (26,1) Section 03 Installation For AVIC-8200NEX and AVIC7200NEX users Do not install this product in a position where the opening of the LCD panel is obstructed by any obstacles, such as the shift lever. Before installing this product, be sure to leave sufficient space so that the LCD panel does not obstruct the shift lever when it is fully opened. This may cause interference with the shift lever, or a malfunction of the mechanism of this product.
Black plate (27,1) Section Installation 03 Do not cover this area. Installation using the screw holes on the side of this product % Fastening this product to the factory radio-mounting bracket. Position this product so that its screw holes are aligned with the screw holes of the bracket, and tighten the screws at three locations on each side. Use either the truss head screws (5 mm × 8 mm) or flush surface screws (5 mm × 9 mm), depending on the shape of the bracket’s screw holes.
Black plate (28,1) Section 03 Installation Fastening the detachable faceplate 6200NEX 5200NEX If you do not plan to remove the detachable faceplate, the detachable faceplate can be fastened with the supplied screw.
Black plate (29,1) Section Installation 03 English Installing the GPS antenna CAUTION Do not cut the GPS antenna lead to shorten it or use an extension to make it longer. Altering the antenna cable could result in a short circuit or malfunction and permanent damage to this product. Installation notes ! The antenna should be installed on a level surface where radio waves will be blocked as little as possible. Radio waves cannot be received by the antenna if reception from the satellite is blocked.
Black plate (30,1) Section 03 Installation When installing the antenna inside the vehicle (on the dashboard or rear shelf) WARNING Do not install the GPS antenna over any sensors or vents on the dashboard of the vehicle, as doing so may interfere with the proper functioning of such sensors or vents and may compromise the ability of the metal sheet under the GPS antenna to properly and securely affix to the dashboard. 1 2 3 Make sure the surface is free of moisture, dust, grime, oil, etc.
Black plate (31,1) Section Installation 03 ! Install the microphone in a place where its direction and distance from the driver make it easiest to pick up the driver’s voice. ! Be sure to turn off (ACC OFF) the product before connecting the microphone. ! Depending on the vehicle model, the microphone cable length may be too short when you mount the microphone on the sun visor. In such cases, install the microphone on the steering column. 2 Attach the microphone clip to the sun visor.
Black plate (32,1) Section 03 Installation Installation on the steering column 1 Detach the microphone base from the microphone clip by sliding the microphone base while pressing the tab. 1 Adjusting the microphone angle 2 4 1 2 3 4 1 Double-sided tape 2 Clamps Use separately sold clamps to secure the lead where necessary inside the vehicle. The microphone angle can be adjusted. 3 Microphone Tab Microphone base Microphone clip 2 Mount the microphone on the steering column.
Black plate (33,1) Section After installation 1 Reconnect the negative (–) terminal of the vehicle’s battery. First, double-check that all connections are correct and that this product is installed correctly. Reassemble all vehicle components that you previously removed. Then reconnect the negative (–) cable to the negative (–) terminal of the battery. 2 5 Drive down an unobstructed road until the GPS starts receiving the signal normally.
Black plate (68,1) PIONEER CORPORATION 1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, JAPAN PIONEER ELECTRONICS (USA) INC. P.O. Box 1540, Long Beach, California 90801-1540, U.S.A. TEL: (800) 421-1404 PIONEER ELECTRONICS OF CANADA, INC. 340 Ferrier Street, Unit 2, Markham, Ontario L3R 2Z5, Canada TEL: 1-877-283-5901 TEL: 905-479-4411 PIONEER EUROPE NV Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium/Belgique TEL: (0) 3/570.05.11 PIONEER ELECTRONICS ASIACENTRE PTE. LTD.
Operation Manual Application for iOS and Android AVICSYNC app English
AVICSYNC Software End User License Agreement This AVICSYNC Software End User License Agreement (“Agreement”) is between You, both the individual installing the AVICSYNC Mobile Application and any single legal entity for which the individual is acting (“You” or “Your”), and PIONEER CORPORATION (“Pioneer”). TAKING ANY STEP TO SET UP OR INSTALL THE MOBILE APPLICATION MEANS THAT YOU ACCEPT ALL OF THE TERMS OF THIS AGREEMENT.
2.3. Functionality. This Mobile Application may not work properly with some content files of In-app Purchase Item depending on the terms of purchase if they are protected by DRM (Digital Rights Management), which may limit functionality of purchased In-app Purchase Item, or depending on the characteristics, style or format of its content files. Mobile Application may collect, transmit to third party partner’s database, and in some cases store data connected to the usage of the Mobile Application by You (e.
3.9. The Mobile Application may only be paired and associated to one single Head Unit. Pairing with another Head Unit results in content licenses and downloads becoming unavailable to You. 3.10. Ensuring access to the Internet from the mobile device is Your responsibility. You acknowledge that in any territory or time, slow or nonconnectivity may be experienced due to capacity limitations of the internet connection or the content servers.
QUALITY, ACCURACY, TITLE OR NONINFRINGEMENT, OR ANY WARRANTY THAT THE PROGRAM MOBILE APPLICATION WILL OPERATE UNINTERRUPTED OR ERROR-FREE. 5. EXCLUSION AND LIMITATION OF LIABILITY 5.1.
10. GENERAL TERMS 10.1. Severability and Waiver. If any provision of this Agreement is held to be illegal, invalid or otherwise unenforceable, that provision will be enforced to the extent possible or, if incapable of enforcement, deemed to be severed and deleted from this Agreement, and the remainder will continue in full force and effect. The waiver by either party of any default or breach of this Agreement will not waive any other or subsequent default or breach. 10.2. No Assignment.
Contents Please read through these instructions so you will know how to operate your model properly. Important The screens shown in the examples may differ from actual screens, which may be changed without notice for performance and function improvements.
Chapter 01 Introduction Manual overview How to use this manual Conventions used in this manual In this manual, the instructions focus on the functional differences for your in-car navigation system when the AVICSYNC app is used or between your in-car navigation system and the AVICSYNC app on your iPhone or smartphone (Android). Other operations are basically the same as on the in-car navigation system. For information on other functions, please read the operation manual for your in-car navigation system.
Chapter Be sure to read this section before using the AVICSYNC function Limitations: ! Access to app-based connected content will depend on the availability of cellular and/or Wi-Fi network coverage for the purpose of allowing your smartphone to connect to the Internet. ! Service availability may be geographically limited to the region. Consult the connected content service provider for additional information.
Chapter 02 Be sure to read this section before using the AVICSYNC function p Depending on the software version of the iPhone and Android, it may not be compatible with this product. For latest compatibility with this product and AVICSYNC App, refer to the information on our website. iPhone models ! iPhone 6 Plus: iOS 8.0.x ! iPhone 6: iOS 8.0.x ! iPhone 5s: iOS 7.0.x, 7.1.x, 8.0.x, 8.1 ! iPhone 5c: iOS 7.0.x, 7.1.x, 8.0.x, 8.1 ! iPhone 5: iOS 7.0.x, 7.1.x, 8.0.x, 8.1 ! iPhone 4s: iOS 7.0.x, 7.1.x, 8.0.
Chapter Preparations before using the AVICSYNC function Installing the AVICSYNC app % Download the AVICSYNC App from the App Store or Google Play and install the app to your iPhone or smartphone (Android). To find AVICSYNC App, access the App Store or Google Play and enter “AVICSYNC” in the search box. Setting the GPS function Please check whether the GPS function on your iPhone or smartphone (Android) is available. p For details, refer to the instruction manual of your iPhone or smartphone (Android).
Chapter Preparations before using the AVICSYNC function 03 8 On your in-car navigation system, touch the iPhone or smartphone (Android) that you want to associate with the in-car navigation system. 9 2 Tap [Shop]. Touch [Next]. p Set the preferences for “Link to User Profile” and “Auto-Sync Navigation Data” later. = For details, refer to Associating your iPhone or smartphone (Android) with the in-car navigation system on page 14. 10 Touch [Associate].
Chapter Preparations before using the AVICSYNC function 2 Drag the screen to scroll the menu to display [Settings]. 03 Current position map (Left: AVICSYNC app; right: in-car navigation screen) 3 3 Tap [Settings]. The “Settings” screen appears. 5 Tap the language that you want to use on screen. 1 Indicates the current location of your vehicle. The apex of the triangular mark indicates your orientation and the display moves automatically as you drive. 2 Displays the data field.
Chapter 03 Preparations before using the AVICSYNC function AVICSYNC connection related keys The following keys that are shown on the map screen are used to control the AVICSYNC connection. They can also be used to confirm the current condition. Key Meaning Indicates that the data communication of the AVICSYNC function is turned on. Indicates that the data communication of the AVICSYNC function is turned off.
Chapter Preparations before using the AVICSYNC function p If the downloaded data is large, it will take some time for the data to be transferred to your in-car navigation system with the Auto-Sync function. We strongly recommended that you use a USB connection for the data transfer. 9 Touch [Associate]. A request for approval of the association is displayed on your iPhone or smartphone (Android). 10 Accept the association on your iPhone or smartphone (Android).
Chapter Preparations before using the AVICSYNC function 03 Purchasing navigation-related content via the AVICSYNC app ! Navigation-related content data may be large in volume. We strongly recommended that you download them via an access point or a router connected with a broadband network, using the Wi-Fi connection of your iPhone or smartphone (Android). ! If the downloaded data is large, it will take some time for the data to be transferred to your in-car navigation system with the Auto-Sync function.
Chapter Using online services Depending on the region, the availability of online services varies and the usage charge of an online service may be different. To use a connected online service, subscription is required on the AVICSYNC app. 04 Activating an online service 1 Purchase online services for traffic via the AVICSYNC app. = For details, refer to Purchasing navigation-related content via the AVICSYNC app on page 16.
Chapter Using online services 04 Viewing the traffic list Traffic information is displayed onscreen in a list. This allows you to check how many traffic incidents have occurred, the locations, and the distance from your current position. Checking the traffic incidents on the map Traffic event information can be displayed on the map. 1 1 Prepare the AVICSYNC function for use. = For details, refer to Regular startup on page 13. 2 Press the MAP button. The Map screen appears. 2 Press the MAP button.
Chapter Using online services 04 1 Indicates that information on traffic incidents are being received. Indicates that there are significant traffic incidents on your route. The icon shows the type of the next traffic incident. 1 Prepare the AVICSYNC function for use. = For details, refer to Regular startup on page 13. 2 Press the MAP button. The Map screen appears. 3 2 Press the MAP button. The Map screen appears. 3 Touch the following key. Displays the navigation menu on the Map screen.
Chapter Using online services 04 Browsing gas (petrol) prices Recent gas prices of nearby gas (petrol) stations are displayed in a list. p When the route is set, gas (petrol) stations are searched for along or around the route. When the route is not set, gas stations are searched for around the current position. p You can change the settings of this function. = For details, refer to Activating an online service on page 17. 1 Prepare the AVICSYNC function for use.
Chapter Using online services Using online search You can search for a place online by entering a name. The wide range around the current position is searched. 1 Prepare the AVICSYNC function for use. = For details, refer to Regular startup on page 13. 2 Press the MAP button. The Map screen appears. 3 Touch the following key. Displays the navigation menu on the Map screen. 4 Touch [New Route]. The “New Route to...” screen appears. 5 Touch [Online Search].
Chapter Other functions 05 Selecting the destination currently set on the AVICSYNC app Using the pedestrian mode 1 Set a route on the AVICSYNC app using your iPhone or smartphone (Android). “Pedestrian mode” is useful when your final destination is a short distance away from a place accessible by vehicle. For example, if you use the pedestrian mode, the AVICSYNC app provides a walking route to the final destination.
Chapter Other functions Setting a walking route for returning to your vehicle After you arrive at the destination using pedestrian mode, you can set a route to your parked vehicle. 1 Start the AVICSYNC app on your iPhone or smartphone (Android). 05 2 On your iPhone or smartphone (Android), tap to display the navigation menu. 3 Tap [New Route]. The “New Route to...” screen appears. 4 Drag the screen to scroll the menu to display [Picture].
Chapter Customizing preferences of the navigation 06 Customizing the in-car navigation settings In this section, only the preferences related to the AVICSYNC function are described. Other operations are basically the same as on the in-car navigation system. For information on other functions, please read the operation manual for your in-car navigation system. You can configure the navigation settings, and modify the behavior of your in-car navigation system. 1 Press the MAP button.
Chapter Customizing preferences of the navigation Icons for the relevant traffic incidents and lines indicating the traffic flow are shown on the map. Show Free Traffic Flow As Well You can select whether to receive information on smooth traffic flow. Confirm Detours Manually You can enable or disable the manual confirmation of every recalculation. “Weather” settings Online Fuel Prices You can enable or disable the online gas (petrol) price service.
Chapter 06 Customizing preferences of the navigation Information on each option of “Settings” “Route Preferences” settings Vehicle In the AVICSYNC app, [Pedestrian] and [Bicycle] can be additionally selected. p If [Bicycle] or [Pedestrian] is selected as a vehicle type, some menus will be blanked out or become inactive, and operation will not be possible. “Sound” settings In the AVICSYNC app, [Silent Mode] also can be additionally operated.
Appendix Appendix Online service providers CustomWeather p The listed providers are subject to change or their services may be discontinued without notice in the future. Online service Service provider TomTom (TomTom Traffic) Online search HERE Online weather CustomWeather Fuel prices Opis Parking availability and prices Parkopedia Opis Appendix Online traffic Weather data provided by CustomWeather, Inc. Copyright © 2015 CustomWeather. All Rights Reserved.
.. Appendix Appendix ~--------------------------~ The names of private corporations, products and other entities described in this product are the registered trademarks or trademarks of their respective firms.
PIONEER CORPORATION 1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, JAPAN Корпорация Пайонир 1-1, Син-Огура, Сайвай-ку, г. Кавасаки, префектура Канагава, 212-0031, Япония Импортер ООО “ПИОНЕР РУС” 125040, Россия, г. Москва, ул. Правды, д.26 Тел.: +7(495) 956-89-01 PIONEER EUROPE NV Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium/Belgique TEL: (0) 3/570.05.11 Technische Hotline der Pioneer Electronics Deutschland GmbH TEL: 02154/913-333 PIONEER ELECTRONICS (USA) INC. P.O.
Black plate (1,1) English Important Information for the User Importantes informations pour l’utilisateur Français MULTIMEDIA NAVIGATION RECEIVER RÉCEPTEUR DE NAVIGATION MULTIMÉDIA AVIC-8200NEX AVIC-7200NEX AVIC-6200NEX AVIC-5200NEX Be sure to read both this leaflet and Operation Manual contained on the CD-ROM accompanying this product! Both documents include important information that you must understand before using this product.
Black plate (2,1) Contents Thank you for buying this Pioneer product. Please read through these instructions so you will know how to operate your model properly. After you have finished reading the instructions, keep this document in a safe place for future reference.
Black plate (3,1) Chapter Precaution Contains FCC ID : RKXFC6000TS Contains IC ID : 5119A-FC6000TS ! This device complies with Part 15 of FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device.
Black plate (4,1) Chapter 01 Precaution CAUTION This product is a Class 1 laser product classified under the Safety of laser products, IEC 60825-1:2007, and contains a class 1M laser module. To ensure continued safety, do not remove any covers or attempt to gain access to the inside of the product. Refer all servicing to qualified personnel. BE SURE TO OBSERVE THE FOLLOWING GUIDELINES: ! Do not turn up the volume so high that you can’t hear what’s around you.
Black plate (5,1) Chapter Introduction PIONEER AVIC-8200NEX, AVIC7200NEX, AVIC-6200NEX, AVIC5200NEX - for U.S.A. THIS IS A LEGAL AGREEMENT BETWEEN YOU, AS THE END USER, AND PIONEER ELECTRONICS (USA) INC. (“PIONEER”). PLEASE READ THE TERMS AND CONDITIONS OF THIS AGREEMENT CAREFULLY BEFORE USING THE SOFTWARE INSTALLED ON THE PIONEER PRODUCTS. BY USING THE SOFTWARE INSTALLED ON THE PIONEER PRODUCTS, YOU AGREE TO BE BOUND BY THE TERMS OF THIS AGREEMENT.
Black plate (6,1) Chapter 02 Introduction 2 DISCLAIMER OF WARRANTY THE SOFTWARE AND RELATED DOCUMENTATION ARE PROVIDED TO YOU “AS IS”. PIONEER AND ITS LICENSOR(S) (FOR THE PURPOSE OF PROVISIONS 2 AND 3, PIONEER AND ITS LICENSOR(S) SHALL BE COLLECTIVELY REFERRED TO AS “PIONEER”) MAKES AND YOU RECEIVE NO WARRANTY FOR THE SOFTWARE, WHETHER EXPRESS OR IMPLIED, AND ALL WARRANTIES OF MERCHANTABILITY AND FITNESS FOR ANY PARTICULAR PURPOSE FOR THE SOFTWARE ARE EXPRESSLY EXCLUDED.
Black plate (7,1) Chapter Introduction 7 MISCELLANEOUS This is the entire Agreement between Pioneer and you regarding its subject matter. No change in this Agreement shall be effective unless agreed to in writing by Pioneer. Pioneer retailers do not have the authority to change this Agreement. This Agreement shall be governed by and construed in accordance with the internal laws of the State of California.
Black plate (8,1) Chapter 02 Introduction You shall not copy, translate, port, modify or make derivative works of the Software. You shall not loan, rent, disclose, publish, sell, assign, lease, sublicense, market or otherwise transfer the Software or use it in any manner not expressly authorized by this agreement. You shall not derive, or attempt to derive, the source code or structure of all or any portion of the Software by disassembly, decompilation, or any other means.
Black plate (9,1) Chapter Introduction 02 English Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty disclaimer and limitation of liability shall not be applicable to the extent that they are prohibited by any applicable federal, state or local law which provides that such a disclaimer or limitation cannot be waived or preempted.
Black plate (10,1) Chapter 02 Introduction END USER LICENSE AGREEMENT END USER TERMS The content provided by HERE (“Data”) is licensed, not sold. By opening this package, or installing, copying, or otherwise using the Data, you agree to be bound by the terms of this agreement. The Data is provided for your personal, internal use only and may not be resold.
Black plate (11,1) Chapter Introduction Export Control: You agree not to export from anywhere any part of the Data or any direct product thereof except in compliance with, and with all licenses and approvals required under, applicable export laws, rules and regulations, including but not limited to the laws, rules and regulations administered by the Office of Foreign Assets Control of the U.S. Department of Commerce and the Bureau of Industry and Security of the U.S. Department of Commerce.
Black plate (12,1) Chapter 02 Introduction This product includes software developed by IVONA Software Sp. z o.o. Please comply with the terms and conditions of the End User License Agreement set forth by IVONA Software Sp. z o.o. IVONA Software End User License Agreement 1.0 PLEASE READ THE FOLLOWING TERMS AND CONDITIONS CAREFULLY BEFORE DOWNLOADING, INSTALLING OR USING IVONA’S SOFTWARE (AS DEFINED BELOW) OR THE PRODUCT.
Black plate (13,1) Chapter Introduction 4. Restrictions.
Black plate (14,1) Chapter 02 Introduction written agreement between the parties, IVONA will be free to use, disclose, reproduce, license or otherwise distribute and exploit the Feedback provided to it as it sees fit, entirely without obligation or restriction of any kind on account of intellectual property rights or otherwise. 9. Designated Agents.
Black plate (15,1) Chapter Introduction English 14. Disclaimer.
Black plate (16,1) Chapter 02 Introduction About the data for the map database Conventions used in this manual ! Modifications related to roads, streets/highways, terrain, construction and other things before/during the development period may not be reflected in this database. Inevitably, those modifications after that period are not reflected in this database. ! Regardless of existing and newly-built things, the data may be different from the actual condition.
Black plate (17,1) Chapter Important safety information Do not ingest the battery, Chemical Burn Hazard (The remote control supplied with) This product contains a coin/button cell battery. If the coin/ button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children.
Black plate (18,1) Chapter 03 Important safety information ! Route and guidance information displayed by this equipment is for reference purposes only. It may not accurately reflect the latest permissible routes, road conditions, one way streets, road closures, or traffic restrictions. ! Traffic restrictions and advisories currently in force should always take precedence over guidance given by this product. Always obey current traffic restrictions, even if this product provides contrary advice.
Black plate (19,1) Chapter Important safety information ! ! ! ! Traffic information 8200NEX 7200NEX 6200NEX ! Pioneer does not bear responsibility for the accuracy of the information transmitted. ! Pioneer does not bear responsibility for changes to information services provided by broadcasting stations or by related companies, such as cancellation of services or changing to pay-services. Also, we do not accept return of the product for this reason.
Black plate (20,1) Chapter 04 Additional safety information Parking brake interlock Certain functions (such as viewing of video image and certain touch panel key operations) offered by this product could be dangerous (possibly resulting in serious injury or death) and/or unlawful if used while driving. To prevent such functions from being used while the vehicle is in motion, there is an interlock system that senses when the parking brake is set and when the vehicle is moving.
Black plate (21,1) Chapter Additional safety information With an optional rear view camera, you are able to use this product as an aid to keep an eye on trailers, or backing into a tight parking spot. WARNING ! SCREEN IMAGE MAY APPEAR REVERSED. ! USE INPUT ONLY FOR REVERSE OR MIRROR IMAGE REAR VIEW CAMERA. OTHER USE MAY RESULT IN INJURY OR DAMAGE.
Black plate (22,1) Chapter 05 Notes before using the system Important (Serial Number:) The serial number of this device is located on the bottom of this product. For your own security and convenience, be sure to record this number on the enclosed warranty card. Failure to operate After-sales service for Pioneer products Please contact the dealer or distributor from which you purchased the product for aftersales service (including warranty conditions) or any other information.
Black plate (23,1) Chapter Notes before using the system 05 English License Please agree to Terms of use indicated below before using the CD-ROM. Do not use if you are unwilling to consent to the terms of its use. Terms of use Copyright to data provided on the CD-ROM belongs to PIONEER CORPORATION.
Black plate (48,1) To keep up to date with the latest navigational data, you can periodically update your navigation system. For further details, please visit: Vous pouvez mettre à jour régulièrement votre système de navigation pour rester à jour avec les plus récentes données de navigation. Pour plus de détails, visitez : http://pioneer.naviextras.com PIONEER CORPORATION 1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, JAPAN PIONEER ELECTRONICS (USA) INC. P.O.
Notes on Using a USB Type-C Phone Please purchase a USB-A to USB Type-C cable separately. Note sull'utilizzo di un telefono con USB tipo C Acquistare un cavo da USB-A a USB tipo C venduto separatamente. Opmerkingen over het gebruik van een telefoon met USB Type-C Koop een kabel van USB-A naar USB Type-C afzonderlijk. AATTENZIONE ALETOP II telefono con USB tipo C potrebbe non funzionare con alcuni cavi. Utilizzare i cavi consigliati.
English Notice to customers with Apple CarP lay-compatible devices If you connect an Apple CarPiay-compatible device to this product, you will be able to control compatible features directly from the product's screen. For details on using Apple CarP lay, please visit the website for your region (see table at right) to access the instruction manual for Apple CarPiay. Apple CarPiay may not be available in your country or region. To learn more about country availability and compatible apps, visit http://www.
Norsk TabelllnivaKac;/Tablo/Ta6nHI.IaiTabela/~~/J.J~ /J.J~ Merknad til kunder med Apple CarPiay-kompatible enheter. USA Canada Mexico Brazil Latin America Europe Russia Middle East & Africa Australia Hvis du kobler en Apple CarPiay-kompatibel enhet til dette produktet, vii du kunne betjene kompatible funksjoner direkte fra produktets skjerm. For detaljer om bruk av Apple CarPiay, g~ til nettstedet for regionen din (se tabell til h0yre) for~ f~ tilgang til instruksjonsh~ndboken for Apple CarPiay.
P1oneer - - - -·- - - - - Model: Type : AVIC-5200NEXJXNUc Serial Number : Numero de serie: Register your product at Enregistrez votre produit a r'adresse suivante: http://www.pioneerelectronics .com http://www.pioneerelecronics. com in Canada Au Canada http://www. pioneerelectron ics.ca http://www. pioneerelectlon ics.
Important Notice concerning AVICSYNC Support Wichtiger Hinweis zum AVICSYNC-Support Please visit the website for your region for important information about AVICSYNC: Besuchen Sie bitte die Website fUr lhre Region fur wichtige lnformationen uber AVICSYNC: U.S. : Canada: Europe: Australia : India: http://www.pioneerelectronics.com/AVICSYNC http://www.pioneerelectronics.ca/AVICSYNC http://www.pioneer.eu/AVICSYNC http://www.pioneer.eom.au/AVICSYNC http://www.pioneer-india.
PIONEER ELECTRONICS (USA) INC. PIONEER ELECTRONIQUE DU CANADA, INC. GARANTIE LIMITI~E GARANTIE VALIDE SEULEMENT DANS LE PAYS OU LE PRODUIT A ETE ACHETE GARANTIE Pioneer Electronics (USA) Inc. (PUSA) et Pioneer Electronique du Canada, Inc.
PIONEER ELECTRONICS OF CANADA, INC. PIONEER ELECTRONICS (USA) INC. LIMITED WARRANTY WARRANTY VALID ONLY IN COUNTRY OF PRODUCT PURCHASE WARRANTY Pioneer Electronics (USA) Inc. (PUSA), and Pioneer Electronics Of Canada, Inc. (POC), warrant that products distributed by PUSAin the U.S.A.