Operation Manual ENGLISH DOUBLE-DIN DVD NAVIGATION SYSTEM AVIC-D1 Notice to all users: This software requires that the navigation unit be properly connected to your vehicle’s parking brake. If not properly connected and depending on your vehicle, additional installation may be required. For more information, please contact your Authorized Pioneer Electronics retailer or call us at (800) 421-1404.
The screen shown in the example may differ from the actual screen. The actual screen may be changed without notice for performance and function improvements.
Introduction License Agreement PIONEER AVIC-D1 - for U.S.A. THIS IS A LEGAL AGREEMENT BETWEEN YOU, AS THE END USER, AND PIONEER ELECTRONICS (USA) INC. (“PIONEER”). PLEASE READ THE TERMS AND CONDITIONS OF THIS AGREEMENT CAREFULLY BEFORE USING THE SOFTWARE INSTALLED ON THE PIONEER PRODUCTS. BY USING THE SOFTWARE INSTALLED ON THE PIONEER PRODUCTS, YOU AGREE TO BE BOUND BY THE TERMS OF THIS AGREEMENT.
3. LIMITATION OF LIABILITY 4.
PIONEER AVIC-D1 - for Canada THIS IS A LEGAL AGREEMENT BETWEEN YOU, AS THE END USER, AND PIONEER ELECTRONICS OF CANADA, INC. (“PIONEER”). PLEASE READ THE TERMS AND CONDITIONS OF THIS AGREEMENT CAREFULLY BEFORE USING THE SOFTWARE INSTALLED ON THE PIONEER PRODUCTS. BY USING THE SOFTWARE INSTALLED ON THE PIONEER PRODUCTS, YOU AGREE TO BE BOUND BY THE TERMS OF THIS AGREEMENT.
3. LIMITATION OF LIABILITY 4.
Terms and Conditions for the Tele Atlas Data THIS IS A LEGAL AGREEMENT (THE “AGREEMENT”) BETWEEN YOU, THE END USER, AND TELE ATLAS NORTH AMERICA, INC. (“Tele Atlas”). BY USING YOUR COPY OF THE TELE ATLAS DATA, YOU AGREE TO THE TERMS AND CONDITIONS OF THIS AGREEMENT. 1. Grant of License.
harmless from and against any liability, loss, injury (including injuries resulting in death), demand, action, cost, expense, or claim of any kind or character, including but not limited to attorney’s fees, arising out of or in connection with any use or possession by you of the Data. 7. U.S. Government Rights.
- 11 shall survive the expiration or termination of this Agreement. This Agreement may be amended, altered, or modified only by Tele Atlas. You may not assign any part of this Agreement without Tele Atlas’ prior written consent. You acknowledge and understand that the Data may be subject to restrictions on exportation and agree to comply with any applicable export laws.
Table of Contents Introduction License Agreement 1 PIONEER AVIC-D1 - for U.S.A.
Traffic flow information 52 Selecting traffic information to display 53 Using the XM Tuner to View Stock, Sports, and Other Information 54 Displaying stock prices 54 Displaying browsable information 55 Displaying favorite browsable Information 56 Checking the Reception Status of the XM Tuner 56 Emergency Info 57 Checking the information registered as Emergency Info 57 Registering user information 57 Searching for car service in an emergency 58 Changing Background Picture 59 Setting the Vehicle Dynamics Disp
DVD Player (S-DVD) 92 Playing a disc 92 Selecting a disc 92 Pausing disc playback 92 Changing the wide screen mode 92 Advanced DVD player operation 93 Repeating play 93 Playing tracks in a random order 93 Scanning tracks of a CD 93 Using ITS playlists 93 External Unit 94 Operating the external unit 94 Operate the external unit by using 1 key — 6 key 94 Advanced external unit operation 94 Operate the external unit by using FUNCTION 1 — FUNCTION 4 94 Switching the automatic and manual function 95 AUX 95 Selec
Important Safety Information Before using your Navigation System, be sure to read and fully understand the following safety information: ❒ Read the entire manual before operating this Navigation System. ❒ The navigation features of your Navigation System (and rear view camera option if purchased) are intended solely as an aid to you in the operation of your vehicle. It is not a substitute for your attentiveness, judgment, and care when driving.
Notes Before Using the System and Additional Safety Information Product registration Visit us at the following site: Failure to operate Should the Navigation System fail to operate properly, contact your dealer or the nearest authorized Pioneer service facility. After-sales service for Pioneer products Please contact the dealer or distributor from which you purchased the product for after-sales service (including warranty conditions) or any other information.
To ensure safe driving ❒ “Visual image” in this manual indicates the moving image from the equipments which are connected to the Navigation System with AVBUS or RCA cable, such as DVD player and TV tuner. When you attempt to watch visual images while driving, the warning Viewing of front seat video source while driving is strictly prohibited. will appear on the screen.
Features (Characteristics of this software) Touch panel key operation It is possible to operate the navigation function and the Audio function by using touch panel key. Variety of View Modes Various types of screen display can be selected for navigation guidance. – Map View, Route View, Guide View The split screen mode is also available. – Rear View mode (Rear view camera screen and Navigation map screen) You can also display information on vehicle speed, acceleration, and voltage, etc.
❒ Pioneer does not bear responsibility for changes to information services provided by XM, such as cancellation of the services or subscription update. ❒ Traffic information is not taken into account when calculating estimated time of arrival time or travel time for your destination.
Manual Overview This manual provides the important information you need to make full use of your new Navigation System. The beginning sections outline the Navigation System and describe its basic operation. The later sections describe the details of the navigation functions. Chapters 6, 7 and 8 describe how to operate the AV functions. Please read these chapters when you use a disc in the built-in CD drive or operate the Pioneer audio equipment connected to the navigation unit.
8 Customizing the Audio Source Setting Using the audio source, various settings are available to suit your audio-visual taste. This chapter describes how to change the settings. Appendix Read the appendix to learn more about your Navigation System and such information as the availability of after-care. Please see “Display Information” at the end of this manual for checking the details of each item on the menu.
DVD Map Discs for Navigation System Configuration of data recorded on discs The map for this Navigation System is supplied on two discs: one for the west and the other for the east. Please set the disc to use according to your destination or current location. The areas recorded on each disc are as follows: West area disc East area disc ❒ Removing the disc and inserting another disc causes the Navigation System to automatically restart and reload the new route.
Chapter 1 NAVI/AV Basic Operation Flow from Startup to Termination • If the program is not installed, see page 107 and install the program. 5 Check the details of the cautionary message and touch “OK”. You can operate the Navigation System by touching keys displayed on the screen. If the route is already set, it changes to route guidance mode. The map of your surroundings is displayed.
The most frequently used function is the Address Search, in which the address is specified and the destination searched. This section describes how to use the Address Search and the basics of using the Navigation System. Also, the method of playing CDs is used as an example of switching to the audio source. • For safety reasons, you cannot use these basic navigation functions while your vehicle is in motion.
How to set your destination Press the DEST button to display the main menu. 2 Touch “Address Search”. Selects the method for searching the destination. Touch “Zone code key”. If the destination is in another zone, this changes the zone setting. ❒ Once the zone has been selected, you only have to change zones when your destination is outside of the zone you selected. 6 Input the street name. Touch the letter you wish to input.
NAVI/AV “0-9” : You can input text with numbers. “Back” : Returns you to previous screen. 7 Touch the street from the list. ❒ For example, for “Early California Ct”, you can just enter part of the name, such as “California”. Basic Operation Chapter 1 ❒ When entering the characters, the unit will automatically query the database of all possible options. If there is only one letter that could possibly follow your entry, that letter will automatically be entered.
If you did not input the house number in Step 5, the house number input screen comes up after the “Street” and “City” are determined. You should now input the house number (perform Step 5). 10Drive in accordance with the screen and voice information.
NAVI/AV How to listen to a CD The built-in CD drive in the navigation unit enables you to listen to CDs and MP3/WMA/WAV discs during navigation. This section describes how to listen to a CD with the built-in CD drive. 1 Information of Audio Press the OPEN/CLOSE button. The LCD panel opens halfway, and the CD loading slot appears. OPEN/CLOSE button Basic Operation Chapter 1 Information of track being played 2 The LCD panel closes automatically. The audio CD set in the navigation unit is played.
7 To hide the touch key, touch “HIDE”. NAVI/AV Information of Audio source being played Distance to the guidance point Current direction of travel Next direction of travel Chapter 1 Current time ❒ If you touch the screen, the touch panel keys are displayed again. Pausing playback Touch “PAUSE”. You may pause CD playback by touching “PAUSE”. To resume play again, touch “PAUSE”. Basic Operation 1 For details on the functions which can be used in the audio source, please see Chapters 6, 7 and 8.
26 Basic Operation Chapter 1 NAVI/AV
Chapter 2 NAVI Menu and Map Display This section describes the basic operations, including how to display the main menu and how to use the shortcut menu and the map screen. Info/Traffic menu How to Use Menu Screens The basic operation of the navigation is performed by using menus. There are two types of menu: the “Main menu” and the “Shortcut menu”. Main menu You use this menu for basic operation of your Navigation System.
NAVI Settings menu Set the navigation functions so they can be used easily. ➲ Settings menu ➞ Chapter 5 Shortcut menu Menu and Map Display Chapter 2 Shortcuts allow you to perform various tasks, such as route calculation for the location indicated by the scroll cursor, or registering a location in the Address Book, faster than using the Main menu. ❒ The shortcuts displayed onscreen can be changed. The shortcuts described here are those that can be selected with the system as default setting.
How to Use the Map Switching the current position screen display mode Press the MAP button to display a map of the area around your current position. 2 Press the MAP button again. 3 Touch the mode name or press the MAP button to select the mode you want to display. Displays standard map.
❒ Rear View can be displayed at all times (e.g. when monitoring an attached trailer, etc.) as a split screen where map information is partially displayed. Please beware that in this setting, camera image is not resized to fit to screen, and that a portion of what is seen by the camera is not viewable. NAVI Vehicle Dynamics Display Indicates the status of your vehicle. Enlarged map of the intersection When “Close-up of Junction” in the Settings menu is “On”, an enlarged map of the intersection appears.
(5) Name of the street your vehicle is traveling along (or City Name, etc.) (6) Compass The red arrow indicates north. If the scale is less than 25 mi (50 km), touching the map changes the direction it is displayed in (north up/heading up). When the scale of the map is not less than 25 mi (50 km), it is fixed to “north up”. City Map In certain metropolitan city areas, a more detailed “City Map” is available at the 0.05 mi (50m) map scale or lower.
NAVI (14) Distance to an intersection* Displayed on the enlarged intersection map. The green bar gets shorter as your vehicle approaches an intersection. (15) Next direction of travel* When you approach an intersection, it appears green. The screen displays the distance to the next guidance point, and the next guidance point after that.
(4) The street name, city name, area name and other information for this location. (The information displayed varies according to the scale.) Touching the on the right displays hidden text. ➲ Displaying information on the specified location ➞ Page 33 (5) Shortcut menu ➲ How to use shortcut menu ➞ Page 28 Viewing the information of a specified location Scroll the map and move the scroll cursor to the icon you want to view. 2 Touch 2 Touch the map for at least 2 seconds.
34 Menu and Map Display Chapter 2 NAVI
Chapter 3 NAVI Setting a Route to Your Destination • For safety reasons, these route-setting functions are not available while your vehicle is in motion. To enable these functions, you must stop in a safe place and put on the parking brake before setting your route. (see page 12 Interlock for details). ❒ Some information on traffic regulations by days or time depends on the time when the route calculation is performed.
NAVI Chapter 3 Setting a Route to Your Destination 5 Touch the subcategory. 6 Input the name of the POI. If the list does not automatically appear when the name of the POI has been entered, try touching “OK”. “City” : First, touch to specify the destination city or area. ❒ If less than six POIs in a subcategory are registered, the screen for inputting the POI name is not displayed. Please proceed to Step 7. 7 Touch POI for your destination.
Setting an Entrance or Exit of a Freeway as Your Destination ➲ Searching the destination by map ➞ Page 33 Searching for Your Destination by Specifying the Telephone Number If you know the telephone number of your destination, you can quickly search for your destination by specifying the telephone number. 1 Touch “Destination” in the Main menu, and then touch “Telephone Search”. The telephone number entry screen appears. 2 Input a telephone number.
NAVI Selecting Destination from the Destination History and Address Book 2 Any place that has been searched before is stored in the “Destination History”. Places that you have registered manually, such as your home, are stored in the “Address Book”. Simply select the place you want to go to from the list and a route to that place will be calculated. 1 Touch “Destination” in the Main menu, and then touch “Address Book” or “Destination History”. 2 Touch your destination name. Touch “Yes (all)”.
3 Touch the point to start scrolling. (3) You can select the following items: (1) Starting Point (2) Way Point (If this is set) (3) Destination ❒ If you have selected “Way Point”, a list of the way points on the route is displayed. Touch the place you want to start scrolling from and proceed to step 5. 4 Touch or to scroll the map. To continue scrolling after you release your finger, touch and hold or . If necessary, the scale of the map can be changed.
NAVI Checking the set route from the shortcut menu You can also check the information about the set route from the shortcut menu. 1 Touch the map screen. The Shortcut menu appears. 2 Touch . The Route/Detour menu appears. 3 Touch, “Route Profile” or “Route Scroll”. Recalculating the Route to Your Destination You can set the length of the area, and avoid just that area, or you can even search a new route from the current location to your destination.
Automatic : You can sort the destination and way points automatically. The system will show the nearest way point (distance in a straight line) from the current location as way point 1, and sort the other points (including your destination) in order of distance from the way point before your current location. Original : Returns to the original order. You can select way points (locations you want to visit on the way to your destination) and you can recalculate the route to pass through these locations.
NAVI Setting Areas to Avoid 5 Scroll the map, adjust the position of the red frame, and touch “OK”. If you register Areas to Avoid, such as crowded intersections or congested areas, routes can be calculated that avoid those areas. Areas to Avoid can be set from the Route Options menu. ❒ An area not stored on the disc cannot be set as an Area to Avoid. Registering an area to avoid Setting a Route to Your Destination Chapter 3 This section describes how to register an Area to Avoid for the first time.
Registering/deleting POI Shortcuts Selected POI in a certain category can be shown on the map, and you can check the location on the display. You can register up to six shortcuts to your favorite POI. You can also change or delete the registered shortcuts. 1 2 3 Touch “Info/Traffic” in the Main menu, then touch “Overlay POI”. The list of POI categories appears. Touch the category you want to display. The selected item is marked. If you want to select other categories, repeat this step.
NAVI Modifying the Route Calculation Conditions Deleting a POI shortcut You can change the route calculation conditions using the Route Options menu. The following description features an example of changing the number of the route to be searched. 1 1 Touch “Route Options” in the Main menu. The Route Options menu appears. 2 Touch “Number of Routes”. The content currently set appears under the name of the item. Each time you touch the item, the setting changes.
Recalculate ❒ “Recalculate” is displayed only when the route is set. Number of Routes This setting controls whether the system should calculate only one route, or several routes. 1*: Only one route judged as being optimum by your Navigation System is calculated. Multiple : Several route options are calculated (maximum 6 routes). Route Condition On : Calculate a route that avoids toll roads (including toll areas). Off* : Calculate a route that may include toll roads (including toll areas).
4 Touch “Information” to check the information on the selected route. You can also check details of the roads along the selected route. (If you touch “Back”, you can return to the previous display.) ➲ “Route Scroll” ➞ Page 38 (Step 3 and 4) ➲ “Route Profile” ➞ Page 39 (Step 3 and 4) ❒ After the route is calculated, it may take some time until the detailed route information (Route Profile) can be confirmed. 5 Touch “OK”. The route you selected is accepted, and the map of your surroundings appears.
Chapter 4 NAVI Editing the Navigation Utilities • For safety reasons, these functions are not available while your vehicle is in motion. To enable these functions, you must stop in a safe place and put on the parking brake before setting your route (see page 12 Interlock for details). 1 Touch “Setting” in the Main menu, then touch “Defined Locations”. 2 Touch “Set ”Go To””. When registering your home location, touch “Set ”Home””.
NAVI Registering a previous location in the Address Book Once a destination or way point is searched, it is automatically retained and stored in the Destination History. If a search is canceled while still in progress, only the places where the map was displayed and scrolled through or places where the short-cut menu was displayed are retained and stored. Note that after 100 places are stored, new places are automatically overwritten on top of old ones, in oldest to most recent order.
(1) Name You can enter the desired name. (2) Name (2nd line) The name of the city appears in this column. (Not editable.) (3) Phone number You can search by registered telephone number. (4) Pictograph The symbol displayed on the map. (5) Sound The selected operating sound is played. (6) Modify Location You can change the registered location by scrolling the map. 4 Touch “Save”. Completes the registration. ❒ If you want to stop registration, touch “Back”. Changing a name 2 Enter a new name; touch “OK”.
NAVI Alternative options : Delete This Item : Delete the location selected in Step 2. Delete All Address Book Entries (or Delete All Destinations) : Delete all the Address Book or Destination History data. 4 Select “Yes”. The data you selected is deleted. Alternative option: No : The display shown in Step 3 appears. ❒ Because deleted data cannot be restored, take extra care not to select “Delete All Address Book Entries” by mistake.
(1) (2) (4) (5) 1 (3) (1) Street or place (2) Direction (3) Incident (4) Distance to the location (5) The incident numbers currently displayed and the total number of incidents ❒ The incidents that have already been read will be displayed in white. Unread incidents will be in yellow. ❒ Touching the allows you to check the place on a map. (Traffic information without positional information cannot be checked on a map.) Touch “Info/Traffic” in the Main menu, and then touch “Traffic On Route”.
NAVI ➲ “Selecting traffic information to display” ➞ Page 53 When checking traffic congestion information manually If you want to check the traffic information details, move the scroll cursor onto the , etc. and touch . This allows you to view place names and other information. Touching on the screen allows you to check for traffic congestion information on your route.
Selecting traffic information to display There are different types of traffic information that can be received via the XM NavTraffic service, and you are able to select which types will be incorporated and displayed on your Navigation System.
NAVI Set use of Traffic flow information setting to off 1 2 Touch “Info/Traffic” in the Main menu, and then touch “Traffic Settings”. Touch “On”. Using the XM Tuner to View Stock, Sports, and Other Information When an XM tuner (GEX-P10XMT) is connected, you can receive stock price, sports, etc. and display it onscreen. You may also register favorite information in the Navigation System. Displaying stock prices Can display the prices of up to 12 stocks. 1 The button changes to “OFF”.
Displaying browsable information ❒ The displayed items depend on the information which is sent from each station. 1 Touch “Info/Traffic” in the Main menu, then touch “Browse”. The screen will display a list of categories. The information appearing onscreen is automatically updated at regular intervals. 2 Touch a category you want to browse from the list. 3 Touch the topic you wish to view. 4 Touch an item (a topic) to display the content.
NAVI Displaying favorite browsable Information Checking the Reception Status of the XM Tuner An XM special content can be assigned as a shortcut or “My Favorites” so that it can be accessed without having to search every time an update is needed. The following are the instructions on how to do so: 1 1 Store the desired item (topic). ➲ Displaying browsable information ➞ Page 55 2 Touch “Info/Traffic” in the Main menu, and then touch “My Favorites”.
Emergency Info • The Emergency Info screen is only intended to provide information to a driver that may be useful during an emergency situation, and does not replace the need to call for emergency assistance, when necessary. Checking the information registered as Emergency Info 1 Touch “Info/Traffic” in the Main menu, and then touch “Emergency Info”. (1) (2) NAVI The Emergency Info screen provides important emergency information pertaining to your vehicle, insurance, and current location.
NAVI 4 Input the number you wish to register, and then touch “OK”. Edit VIN Register your Vehicle’s Identification Number. (You can enter the number between 1 and 17.) Edit Policy Number Register your insurance policy number. 1 Touch “Info/Traffic” in the Main menu, and then touch “Emergency Info”. 2 Touch “Locate Car Service”. A list of auto services appears onscreen. 3 Edit Insurance Phone Register your insurance company’s phone number.
3 Touch “Navigation Background” or “AV Background”. 4 Touch a picture you want for the background, then touch “OK”. The background image starts changing. After a short while, the new background image appears. 5 Touch “Done”. appears on the right of NAVI When the the list You can also set a destination by touching the to the right of the list. Touch “OK” to confirm. The location pointed by the scroll cursor will be set as a destination.
NAVI Setting the Vehicle Dynamics Display Touch “Adjust Look” to display a screen for selecting the panel pattern. Touch one of the patterns from among those displayed onscreen to change the panel to the selected pattern. ❒ If you touch “Peak Hold Reset”, the maximum and minimum (green line) values indicated in “Acceleration” and “Side Acceleration” are reset. ❒ You cannot change the speedometer at the center.
❒ If the ND-PG1 is connected, the distance calculation value cannot be replaced automatically. (5) Speed Speed detected by the Navigation System is indicated. (This indication may be different from the actual speed of your vehicle, so please do not use this instead of the speedometer of your vehicle.) (6) Acceleration or deceleration/Rotational speed Acceleration or deceleration velocity of your vehicle is indicated. Also, rotational speed when your vehicle turns to left or right is shown.
NAVI Correcting the Installation Angle You can correct the installation angle of the navigation unit. Even if the installation angle is not facing the center, higher-accuracy sensor learning can be performed by correcting it. Select the orientation of the LCD panel from the left, center, and right. 1 Touch “Settings” in the Main menu, then touch “System Options”. 2 Touch “Installation Angle Setup”. 3 Check the direction the LCD panel faces, and touch the corresponding item.
Chapter 5 NAVI Customizing Your Navigation System • For safety reasons, these functions are not available while your vehicle is in motion. To enable these functions, you must stop in a safe place and put on the parking brake before setting your route (see page 12 Interlock for details). 1 Touch “Settings” in the Main menu. The Settings menu appears. 2 Touch “System Options”. The screen changes. “Mile” is displayed below “KM/Mile Setting”, indicating that this function is currently set to “Mile”.
NAVI ➲ Switching the muting/attenuation ➞ Page 101 • Voice Guidance This setting controls whether the volume of the Audio source is automatically muted during voice guidance. On* : During voice guidance, the volume of the Audio source is muted automatically. Off : Volume of the Audio source stays the same during voice guidance. Customizing Your Navigation System Chapter 5 System Options Touch “System Options” in the Setting Menu to display.
Map Display Options NAVI : Registration * Register to the Address Book information on the location indicated by the scroll cursor. Touch “Map Display Options” in the Setting Menu to display. ➲ Register to Address Book ➞ Page 48 : Vicinity Search * Find POIs (Points Of Interest) in the vicinity of the scroll cursor. ➲ Searching the facilities surrounding a certain place ➞ Page 36 : Whole Route Overview * Displays the entire currently set route.
NAVI Close-up of Junction This setting enables to switch to an enlarged map around the point where your vehicle is approaching an intersection, entrance/exit of freeway, or a junction. On* : Display switches to an enlarged map. Off : Does not switch to an enlarged map. Customizing Your Navigation System Chapter 5 Arrow in AV Set whether to display the guidance information by arrow on the Audio Operation screen. On* : Display guidance information by arrow on the Audio Operation screen.
Restore Factory Settings NAVI Reset various settings registered to the Navigation System and restores to the default or factory settings. To restore, touch “Yes”. ❒ About the item return to the default, please check “Display Information” at the end of this manual.
68 Customizing Your Navigation System Chapter 5 NAVI
Chapter 6 AV Using the AV Source (Built-in CD Drive and Radio) You can play a CD or MP3/WMA/WAV disc or use the radio with the navigation unit. This chapter describes how to use the audio source and the basic operation of the audio source. Selecting a source 1 Press the AV button to switch Audio operation screen. 2 Touch the source icon to select the desired source.
❒ External unit refers to a Pioneer product (such as one available in the future) that, although incompatible as a source, enables control of basic functions by the Navigation System. Two external units can be controlled by the Navigation System. When two external units are connected, the allocation of them to external unit 1 or external unit 2 is automatically set by the Navigation System.
How to display each menu AV 1 Select the desired source. 2 Press the joystick to display MENU. 3 Touch “AUDIO”, “FUNCTION” or “SETUP” to enter the menu you want to operate. Each menu is displayed. The items that cannot be operated according to the sources or conditions are indicated in gray. FUNCTION menu Basic Operation (4) (5) (3) (2) Chapter 6 (1) (4) (5) SETUP menu (4) (5) (1) FUNCTION key Touch to enter the FUNCTION menu for each source.
AV Operating the Built-in CD Drive You can play a CD or MP3/WMA/WAV disc using the built-in CD drive of the navigation unit. This section describes common operations for these media. Using the AV Source (Built-in CD Drive and Radio) Chapter 6 Built-in CD drive source ❒ Also see at “Handling and Care of the Disc” in the Hardware Manual for more cautions about handling each media.
Touch key operation Touch the source icon and then touch “CD” to select the built-in CD drive. When the source icon is not displayed, you can display it by touching the screen. If no disc is loaded in navigation unit, you cannot select “CD” (built-in CD drive). ➲ insert a disc in navigation unit ➞ Page 24 Touch keys (e.g., MP3/WMA) (8) (3) (6) (4) (1) (5) (7) (9) ❒ When playing a CD TEXT disc, (5), (7), (8), are not displayed.
Touch “0” — “9” to input the desired number. • To select 3, touch 3. • To select 10, touch 1 and 0 in order. • To select 23, touch 2 and 3 in order. To cancel the input numbers, touch “CLEAR”. 2 While the input number is displayed, touch “ENTER”. This starts playback from the selected track. ❒ If the track number you entered does not exist, the track near that number will be played.
Built-in CD drive source (2) Playing tracks in a random order Touching “RANDOM” switches between “ON” and “OFF”. In the case of MP3/WMA/WAV, the selected tracks in the repeated range are randomly played. You can switch the search method between fast forward/backward and skipping every 10 tracks. Each touch of the “SEARCH MODE” changes the setting follows: • FF/REV — Perform fast forward or backward by touching or . • ROUGH — Skips 10 tracks forward or backward by touching or .
1 Touch the source icon and then touch “RADIO” to select the radio. Listening to the radio 2 Touch “BAND” to select a band. Touch “BAND” repeatedly until the desired band is displayed, FM1, FM2, FM3 for FM or AM. 3 To perform manual tuning, touch or briefly. The frequencies move up or down step by step. You can also perform manual tuning by moving the joystick left or right. 4 To perform seek tuning, keep touching or for about one second and release.
Storing the strongest broadcast frequencies If you touch any of the preset tuning keys P1 (PRESET 1) — P6 (PRESET 6) you can easily store up to six broadcast frequencies for later recall with the touch of a key. BSM (best stations memory) lets you automatically store the six strongest broadcast frequencies under preset tuning keys P1 — P6 and once stored there you can tune in to those frequencies with the touch of a key. 2 Touch “START” to turn BSM on. BSM begins to flash.
78 Using the AV Source (Built-in CD Drive and Radio) Chapter 6 RADIO AV
Chapter 7 AV Using the AV Source (Pioneer AV Equipment) When Pioneer audio equipment is connected to the Navigation System using IP-BUS or AV-BUS, such equipment can be operated from the navigation unit. This chapter describes the operation of the audio source that can be used when the Pioneer audio equipment is connected. When reading this chapter, please also refer to the operation manual of the AV equipment connected to the Navigation System. ❒ AVIC-D1 does not support 50-disc multi-CD players.
AV Pausing CD playback 2 Pause lets you temporarily stop disc playback. 1 Touch “PAUSE”. Play of the current track pauses. Advanced multi-CD player operation Touch “RANDOM” in the FUNCTION menu. Touching “RANDOM” switches between “ON” and “OFF”. Tracks will play in a random order within the previously selected M-CD or DISC ranges. Scanning CDs and tracks When the repeat play range is set to DISC, the beginning of each track on the selected disc plays for about 10 seconds.
Selecting tracks from the track list Track list lets you select a track from the list. When the CD TEXT disc is played, you can see the track titles on a CD TEXT disc and select one of them to playback. Playback from your ITS playlist Touch “TRACK LIST” in the FUNCTION menu. 1 Select the repeat range. ➲ Repeating play ➞ Page 80 2 Touch or of tracks. 2 3 Touch the track in the list. That selection will begin to play. Touch “ITS PLAY” in the FUNCTION menu.
AV Erasing a CD from your ITS playlist When you want to delete all tracks of a CD from your ITS playlist, you can if ITS play is off. 1 Play a CD that you want to delete. ➲ How to select a CD ➞ Page 79 2 Touch “ITS MEMORY” in the FUNCTION menu. 3 Touch “CLEAR” to erase all tracks on the currently playing CD from your ITS playlist. All tracks on the currently playing CD are erased from your playlist and ALL CLEAR is displayed.
Switching between the detail information display and the preset list display (8) Category icon Shows the category icon for the selected channel. You can switch the left side of the basic screen according to your preference. ➲ Switching between the detail information display and the preset list display ➞ Page 83 1 1 3 To perform tuning, touch or . The channels move up or down step by step. If Detail information display (e.g. ALL CH mode) XM (GEX-P10XMT) Touch “BAND” to select a XM band.
AV XM (GEX-P10XMT) Chapter 7 Using the AV Source (Pioneer AV Equipment) The number you have touched will flash in the XM preset number indicator and then remain lit. The selected station has been stored in memory. The next time you touch the same preset tuning key P1 — P6 the station is recalled from memory. ❒ Up to 18 stations, 6 for each of three XM bands can be stored in memory. ❒ You can also use the following operations to recall stations assigned to preset tuning keys P1 — P6.
The song title and artist name of the song you are listening to can be memorized. 1 Press and hold the MEMO button for two seconds or more. The song title and artist name of the song you are listening to are memorized, and a confirmation message appears. ❒ The song title and artist name of up to 12 tracks can be memorized. Trying to save more than 12 tracks will overwrite old ones. ❒ You cannot memorize the song title or the artist name when “– – – – – – – –” is displayed on the title information.
XM Tuner (GEX-P910XM) AV Advanced XM tuner operation Listening to XM Satellite Radio (1) (2)(6) (3) (4) (5) (1) (1) Function display Shows the function names. ➲ How to display the FUNCTION menu ➞ Page 71 Using the AV Source (Pioneer AV Equipment) Chapter 7 XM (GEX-P910XM) Setting the notification of the memorized tracks Display the song title list memorized for the MyMix Function (MyMix list). You can change the setting of the notification when the track is broadcast again.
Touch the source icon and then touch “XM” to select the XM. 2 Touch “BAND” to select a XM band. Touch “BAND” repeatedly until the desired XM band is displayed, XM1, XM2 or XM3. 3 To perform tuning, touch or . The channels move up or down step by step. Channels that cannot currently be selected are skipped, and the next channel is selected. Switching the XM channel select mode You can switch if you select a channel with a channel number or within a selected category when you select a channel.
❒ Display changes as follows when you switch channels or operate in other ways. The text of selected display* is automatically scrolled.
Switching the scroll setting 1 Touch “FUNCTION 2” in the FUNCTION menu. 2 Touch and hold “SEND” to select the scroll setting. Touch and hold “SEND” selects scroll setting in the following order: Continuous scroll setting — One-time scroll setting ❒ When you switch the scroll setting, the beep sounds. (1) (1) Function display Shows the function names. ➲ How to display the FUNCTION menu ➞ Page 71 Selecting a channel in the channel category 2 Touch “ESC” to return to the previous display.
1 Touch the source icon and then touch “TV” to select the TV. 2 • For safety reasons, visual images cannot be viewed while your vehicle is in motion. To view visual images, you must stop in a safe place and put on the parking brake before setting your route (see page 12 Interlock for details). Touch “BAND” to select a band. Touch “BAND” repeatedly until the desired band is displayed, TV1 or TV2. 3 To perform manual tuning, touch or briefly. The channels move up or down step by step.
AV ❒ You can also use the joystick up or down to recall stations assigned to preset tuning keys P1 — P12. Changing the wide screen mode ➲ How to change the wide screen mode ➞ Page 104 Advanced TV tuner operation (1) (1) Function display Shows the function names. TV ➲ How to display the FUNCTION menu ➞ Page 71 Touch “BSSM” in the FUNCTION menu. 2 Touch “START” to turn BSSM on. BSSM begins to flash.
DVD Player (S-DVD) AV (4) Chapter/track number indicator Shows the chapter/track currently playing. • For safety reasons, visual images cannot be viewed while your vehicle is in motion. To view visual images, you must stop in a safe place and put on the parking brake before setting your route (see page 12 Interlock for details).
Advanced DVD player operation Scanning tracks of a CD (1) (1) Function display Shows the function names. ➲ How to display the FUNCTION menu ➞ Page 71 Repeating play ❒ During PBC playback of Video CDs, this function cannot be used. 1 1 Touch “SCAN” in the FUNCTION menu. Touching “SCAN” switches between “ON” and “OFF”. The first 10 seconds of each track is played. 2 When you find the desired track touch “SCAN” to turn scan play off.
Operate the external unit by using 1 key — 6 key Operating the external unit The external unit can be operated by transmitting the operating commands set to 1 key - 6 key. AV External Unit (1) (2) Using the AV Source (Pioneer AV Equipment) Chapter 7 EXT ❒ Operation varies depending on the external unit connected. (In some cases, the external unit may not respond.
2 AV Input (AV) The operation command is transmitted to the external unit. • For safety reasons, visual images cannot be viewed while your vehicle is in motion. To view visual images, you must stop in a safe place and put on the parking brake before setting your route (see page 12 Interlock for details). AV Touch “SEND”. Switching the automatic and manual function You can turn automatic and manual function on or off. You can switch between AUTO and MANUAL functions of the external unit connected.
96 Using the AV Source (Pioneer AV Equipment) Chapter 7 AUX/AV AV
Chapter 8 AV Customizing the Audio Source Setting Various settings according to your audiovisual requests are available with the audio source. This chapter describes the methods of changing the various settings and how to set of the LCD panel. Touch or to adjust front/rear speaker balance. Each time you touch or moves the front/ rear speaker balance towards the front or the rear. FRONT:15 — REAR:15 is displayed as the front/rear speaker balance moves from front to rear.
AV Using the equalizer The equalizer lets you adjust the equalization to match vehicle interior acoustic characteristics as desired. Recalling equalizer curves There are six stored equalizer curves which you can easily switch. Here is a list of the equalizer curves: • BAND: You can select the equalizer band. • LEVEL: You can select the decibel (dB) level of the selected EQ. • FREQUENCY: You can select which frequency to be set as the center frequency.
Compensating for equalizer curves (EQ-EX) The EQ-EX function smoothes the effects of each equalizer curve. 1 Touch “EQ-EX” in the AUDIO menu. Touching “EQ-EX” switches between “ON” and “OFF”. Adjusting loudness Loudness compensates for deficiencies in the low- and high-sound ranges at low volume. 1 Touch “LOUDNESS” in the AUDIO menu. 2 Touch “ON” to turn loudness on. To turn loudness off, touch “OFF”. 3 Touch or to select a desired level.
SLA (source level adjustment) lets you adjust the volume level of each source to prevent radical changes in volume when switching between sources. • Settings are based on the FM tuner volume level, which remains unchanged. 1 Compare the FM tuner volume level with the level of the source you wish to adjust. 2 Touch “SLA” in the AUDIO menu. 3 Touch “+” or “–” to adjust the source volume. +4 — –4 is displayed as the source volume is increased or decreased.
1 Touch “REAR SP” in the INITIAL menu. 2 Touch “REAR SP” to switch the rear output setting. When no subwoofer is connected to the rear output, select FULL. When a subwoofer is connected to the rear output, select SUB. W. ❒ When the rear output setting is SUB. W, you cannot change the subwoofer controller. This function is activated in the following condition: — When “MUTE” or “ATT” is selected in this setting. — When “On” is selected in “Voice Guidance” on “Mute Settings”.
AV Changing the voice output of the navigation guidance Other Functions When there is a navigation guidance, you can mix the guidance voice/beep sound from the navigation unit with the audio sound from this system. You can select the speaker output for the navigation guidance. Setup adjustments 1 Touch “GUIDE VOICE” in the INITIAL menu.
• Pioneer recommends the use of a camera which outputs mirror reversed images, otherwise screen image may appear reversed. • Confirm the setting immediately whether the display changes to a rear view camera image when the shift lever is moved to REVERSE (R) from another position. • When the whole screen changes to a rear view camera image during normal driving, switch to another setting.
AV ❒ When video is viewed in a wide screen mode that does not match its original aspect ratio, it may appear differently. ❒ Remember that use of this system for commercial or public viewing purposes may constitute an infringement on the author’s rights protected by the Copyright Law. ❒ Video will appear grainy when viewed in CINEMA or ZOOM mode. ❒ The navigation map and the rear view camera picture is always FULL.
Adjusting the dimmer When the “DIMMER” is set to “AUTO”, you can set the display to dim as the surroundings become darker. The adjustment of DIMMER is stored separately for each ambient light; daytime, evening and nighttime. The brightness of the LCD screen adjusts automatically to the optimum level in accordance with the ambient light based on the set values. Press P.ADJ/B.LIGHT button and hold to display PICTURE ADJUST.
106 Customizing the Audio Source Setting Chapter 8 Other Functions AV
NAVI/AV Appendix Installing the Program The program is installed to the Navigation System using the application disc. This is not necessary if your dealer already performed the installation. When installing the program, you carry out the following operations. When all the setup procedures are completed, you can use the Navigation System. Insert the disc while the vehicle is parked. 2 Select the language used for the Navigation System. 3 Setting the clock. 1 Park your vehicle in a safe place.
NAVI/AV When the installation is complete, the opening display appears. 10To complete the setting, touch “Back”. Appendix The map of your surroundings appears. 6 Press the MAP button to change the navigation screen. Some time is needed until navigation is ready. 7 Check the details of the cautionary message and touch “OK”. 8 To set the time difference, touch “+” or “–”.
Positioning Technology Positioning by GPS The Global Positioning System (GPS) uses a network of satellites orbiting the Earth. Each of the satellites, which orbit at a height of 68,900,000 feet (21,000 km), continually broadcasts radio signals giving time and position information. This ensures that signals from at least three can be picked up from any open area on the Earth’s surface. 3D hybrid mode This is active when the speed pulse is detected. Inclination of a street can be detected.
NAVI/AV ❒ If you use chains on your wheels for winter driving or put on the spare wheel, errors may suddenly increase because of difference in wheel diameter. The system detects the fact that the tire diameter has changed, and automatically replaces the value for calculating distance. ❒ If the ND-PG1 is used or if your vehicle is operating in Simple hybrid mode, the distance calculation value cannot be replaced automatically.
❒ If, for any reason, GPS signals cannot be received, learning and error correction are not possible. If GPS positioning has been operating for only a short time, your vehicle’s actual position and the current location mark on the map may diverge considerably. Once GPS reception is restored, accuracy will be recovered. • If there is a parallel road. NAVI/AV • If a car phone or cellular phone is used near the GPS antenna, GPS reception may be lost temporarily.
NAVI/AV • If there is a loop or similar road configuration. • If your vehicle is turned on a turntable or similar. • If you take a ferry. • If your vehicle’s wheels spin, such as on a gravel road or in snow. Appendix • If you are driving on a long, straight road or a gently curving road. • If you put on chains, or change your tires for some of a different size. • If you are on a steep mountain road with many height changes.
Limitation of Functions for Areas not Stored on the Disc NAVI/AV • If you join the road after driving around a large parking lot. For areas not stored on the disc (unrecorded areas), the functions will operate as follows: Displaying the map • When you pass around a traffic circle. Some types of vehicle may not output a speed signal while driving at just a few kilometers per hour.
NAVI/AV • If the vehicle deviates from the set route in an unrecorded area, the Auto Reroute function will not work. • Even if “Close-up of Junction” is “On”, the display will not switch to an enlarged map of the intersection. • Even if you drive on the freeway, lane information, freeway exit numbers and freeway signs will not be displayed. Route information Appendix • If the set route goes through an unrecorded area, no route profile for the unrecorded area will be displayed.
Troubleshooting NAVI/AV If you have problems operating your Navigation System, refer to this section. The most common problems are listed below, along with likely causes and solutions. While this list is not comprehensive, it should answer your most common problems. If a solution to your problem cannot be found here, contact your dealer or the nearest authorized Pioneer service facility. Problems in the screen Symptom Power doesn’t turn on. The unit doesn’t operate.
NAVI/AV Symptom Cause The navigation unit is installed with an extreme angle exceeding the limitation of the installation angle. Indication of the position of your vehicle is misaligned after a U-turn or reversing. The map continually reorients itself. Tracking marks are not displayed. The daylight display is used even when the vehicle lights are on. Appendix The display is very dim. No sounds are heard. The volume level will not rise.
Cause The disc is not inserted into the appropriate slot. The disc is inserted upside down. The disc is dirty. The disc is cracked or otherwise damaged. The files on the CD are an irregular file format. The CD format cannot be played back. The parking brake cord is not connected or applied. Parking brake interlock is activated. Audio skipping. The Navigation System is not firmly secured. The source without a video is selected.
NAVI/AV Messages and how to react to them The following messages may be displayed by your Navigation System. ❒ There are occasions when you may see error messages other than those shown here. In such a case, follow the instructions given on the display. Message Please insert the appropriate disc. This is not the appropriate disc. Please insert the appropriate disc. Appendix Irregular speed pulse signal is detected. Please power off the system and check the installation.
Route calculation was not possible. When While waiting for a response from the XM tuner. You are in an area that cannot receive XM tuner reception. Your current location provides very poor reception. Route calculation has failed because of malfunction of map data, software, hardware, or disc. The destination is too far. Route calculation was not possible because the destination is too near. Route calculation was not possible due to traffic regulations. The destination or way point(s) is too close.
NAVI/AV Appendix Message There is no Freeway in this area. When If no freeway was found in the selected Zone. This area does not contain any POI’s of the selected type. Vicinity Search cannot be performed because the searched location is in areas not stored on the DVD Map Disc (unrecorded areas). Facilities of the selected category do not exist in the surrounding areas. Only City Center can be searched. If POI Search was performed on areas not stored on the DVD Map Disc (unrecorded areas).
When Parking brake lead is incorrectly connected. For a certain period after the installation of your Navigation System. What to do Confirm once more that their connections are correct. Drive your vehicle for a while until the sensor learning status “Initializing” is turned to “Simple Hybrid” or “3D Hybrid”. Parking brake lead is incorrectly connected. For a certain period after the installation of your Navigation System. Confirm once more that their connections are correct.
NAVI/AV Appendix Route Setting Information Calculate a route with the shortest travel time to your destination as a priority. Route search specifications Condition 2 :whether to use freeway or not Your Navigation System sets a route to your destination by applying certain built-in rules to the map data. This section provides some useful information about how a route is set. Avoid Freeway : Calculate a route that avoids freeway. (A route using the freeway may be set if your destination is far away.
• Auto Reroute is used when you deviate more than 0.01 mi (30m) from the route.
NAVI/AV Types of the Road Stored in the Disc There are three types of roads in the map of this disc. Glossary This glossary explains some of the terms used in the manual. 3D Hybrid sensor Appendix Roads included in the route guidance and roads not included Turn by Turn Routable Roads contain full attribute data and can be used for full Route Guidance. Pioneer Navigation will display full route guidance, including turn-by-turn voice directions and arrow icons.
Guidance point session is a method of recording more than 2 sessions in one disc. Packet write Your registered home location. This is a general term for a method of writing on CD-R, etc. at the time required for a file, just as is done with files on floppy or hard discs. ID3 tag Point of Interest (POI) This is a method of embedding track-related information in a MP3 file.
NAVI/AV Display Information *1: If you touch “Restore Factory Settings”, the registered POI Shortcuts return to the default or factory settings. *2: If you touch “Restore Factory Settings”, the setting value return to the default or factory settings. Main menu Appendix Destination Route Options Address Search P. 20 Edit Current Route P. 41, 44 Return Home P. 37, 47 View Current Route P. 38, 44 Go to P. 37, 47 Recalculate P. 40, 45 POI Search P. 35 Number of Routes*2 P.
Volume*2 NAVI/AV Settings P. 63 System Options Language Selection P. 64, 107 Short-Cut Selection KM/Mile Setting*2 P. 64 Map Display Options*2 Installation Angle Setup P. 62, 64 Defined Locations Average Speed*2 P. 64 Background Picture Setting P. 59, 64 Demo Mode P. 66 Time P. 66, 108 Modify Current Location P. 66 Hardware Info P. 67 Shortcut menu Appendix Restore Factory Settings P. 128 Tracking Display P. 65 AV Guide Mode P. 65 Day/Night Display P.
NAVI/AV Shortcut menu ❒ The shortcuts displayed onscreen can be changed. The shortcuts described here are those that can be selected with the system as default setting. ❒ Items marked with an asterisk (*3) cannot be removed from the shortcut menu. ➲ Changing a shortcut ➞ Page 64 Shortcut menu : Destination*3 P. 28, 33 Appendix : Chg.Route*3 P. 40 : Registration P. 28, 48 Cancel Route P. 38 : Vicinity Search*1 P. 28 Route Profile P. 39, 40 : Whole Route Overview P. 39 Route Scroll P.
Menu in the Audio Screen NAVI/AV AUDIO menu AUDIO P. 97 EQ P. 98 EQ MENU P. 98 EQ-EX P. 99 LOUDNESS P. 99 SUB WOOFER (NON FADING) P. 99 HPF P. 99 SLA P. 100 Appendix FAD/BAL (BALANCE) INITIAL menu INITIAL AUX P. 100 REAR SP TEL/GUIDE P. 101 GUIDE VOICE P. 102 AUTO ANTENNA P. 102 REAR SP P. 100 PREOUT P. 100 CAMERA P. 102 POLARITY P. 102 SET UP menu SET UP AV INPUT P. 102 CAMERA REAR DISP P. 103 DIMMER P.
NAVI/AV FUNCTION menu S-DVD (M-DVD) FUNCTION S-DVD, M-DVD CD [CD, MP3/WMA/WAV] FUNCTION CD P. 93 REPEAT P. 74 RANDOM P. 93 RANDOM P. 75 SCAN P. 93 SCAN P. 75 ITS PLAY P. 81 COMP P. 75 ITS MEMORY P. 81 SEARCH MODE P. 75 M-CD RADIO FUNCTION M-CD FUNCTION RADIO Appendix REPEAT BSM P. 77 REPEAT P. 80 LOCAL P. 77 RANDOM P. 80 SCAN P. 80 COMP P. 80 TRACK LIST P. 81 ITS PLAY P. 81 ITS MEMORY P. 81 XM (GEX-P10XMT) FUNCTION XM MEMO P.
PIONEER CORPORATION 4-1, MEGURO 1-CHOME, MEGURO-KU, TOKYO 153-8654, JAPAN PIONEER ELECTRONICS (USA) INC. P.O. Box 1540, Long Beach, California 90801-1540, U.S.A. TEL: (800) 421-1404 PIONEER EUROPE NV Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: (0) 3/570.05.11 PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936 TEL: 65-6472-7555 PIONEER ELECTRONICS AUSTRALIA PTY. LTD.
