User Manual

85
Chapter 7 Using the AV Source (Pioneer AV Equipment)AV
Memorizing the song title and the artist
name of a song
The song title and artist name of the song you are
listening to can be memorized.
1 Press and hold the MEMO button for two
seconds or more.
The song title and artist name of the song you
are listening to are memorized, and a confir-
mation message appears.
❒ The song title and artist name of up to 12
tracks can be memorized. Trying to save more
than 12 tracks will overwrite old ones.
❒ You cannot memorize the song title or the art-
ist name when “– – – – – – – –” is displayed on
the title information.
❒ You cannot memorize the song title or the art-
ist name of the channel 000.
❒ There is a possibility the memorized title is not
displayed correctly.
When the memorized track is broadcast
The MEMO button on the navigation unit flashes
as soon as the beep sounds, and a message is
displayed. Touch “Yes” to switch to that station,
and you can listen to that track.
❒ If the memorized track is not selected in the
MyMix list, no notification will be provided
even when that track is broadcast.
❒ Notification may not be provided depending
on the situation of the Navigation System.
➲ Setting the notification of the memorized
track ➞ Page 86
❒ If there is slight difference between the mem-
orized title and the title of the track being
broadcast, no notification will be provided
though they are the same song.
Using the direct traffic
announcement function
You can listen to the memorized traffic channel
by directly calling it up with the TRFC button.
Memorize a traffic channel
1 Tune into the Traffic channel.
2 Press and hold the TRFC button for two
seconds or more.
That traffic channel will be memorized.
❒ The channel 000 and 001 can not be memo-
rized newly (although the channel 001 is the
default).
Calling up the memorized traffic chan-
nel
1 Press the TRFC button.
❒ You can call up a traffic channel even from
a source other than the XM source.
❒ To cancel the traffic announcement, press
the TRFC button once again.
Returning to the channel that
was received immediately
before
1 Touch “PREVIOUS”.
The channel returns to the one received
immediately before.
❒ Depending on the last conditions, the channel
may not return to the previous station.
Display the Radio ID
If you select CH : 000, the Radio ID is displayed.
1 Touch “DIRECT”.
2 Input “000” and then touch “ENTER”.
If you select another channel, display of the
Radio ID is canceled.
Display of the Radio ID repeats displaying
“RADIO ID” and the ID code one after the
other.
❒ You can also display the Radio ID to select
“RADIO ID” from channel category in the
CATEGORY mode.
XM (GEX-P10XMT)