Black plate (1,1) Owner’s Manual HIDE-AWAY NAVIGATION SYSTEM FOR TRUCKS/CAMPER VANS AVIC-F160 HIDE-AWAY NAVIGATION SYSTEM AVIC-F260 For details on software updates, visit www.naviextras.com.
Black plate (2,1) 2 Engb <127075005641>2
Black plate (3,1) Contents Thank you for buying this Pioneer product. Please read through these instructions so you will know how to operate your model properly. After you have finished reading the instructions, keep this document in a safe place for future reference. Important ! The screens shown in the examples may differ from actual screens, which may be changed without notice for performance and function improvements. ! The screen examples shown in this manual are the ones for AVIC-F160.
Black plate (4,1) Contents – Searching for POIs using preset categories 31 Searching for POIs by categories 31 Searching for a POI directly from the name of the facilities 33 Searching for a nearby POI 34 Selecting a location by using “Find on Map” 34 Selecting destination from stored locations 35 Selecting a location you searched for recently 36 – Smart History 36 – History 36 Searching for a location by coordinates 36 Searching for a location by scrolling the map 37 After the location is decided Setting
Black plate (5,1) Contents Other operations More menu 63 Installation Important safeguards 64 Precautions before connecting the system 64 Before installing this product 65 To prevent damage 65 Precautions before installation 66 Connecting the system 67 Installing with the hook and loop fastener 68 Appendix Positioning technology 69 – Positioning by GPS 69 Handling large errors 69 – When positioning by GPS is impossible 69 – Conditions likely to cause noticeable positioning errors 69 Route setting informat
Black plate (6,1) Chapter 01 Precaution Certain country and government laws may prohibit or restrict the placement and use of this system in your vehicle. Please comply with all applicable laws and regulations regarding the use, installation and operation of your navigation system. If you want to dispose this product, do not mix it with general household waste.
Black plate (7,1) Chapter Introduction Licence agreement THIS IS A LEGAL AGREEMENT BETWEEN YOU, AS THE END USER, AND PIONEER CORP. (JAPAN) (“PIONEER”). PLEASE READ THE TERMS AND CONDITIONS OF THIS AGREEMENT CAREFULLY BEFORE USING THE SOFTWARE INSTALLED ON THE PIONEER PRODUCTS. BY USING THE SOFTWARE INSTALLED ON THE PIONEER PRODUCTS, YOU AGREE TO BE BOUND BY THE TERMS OF THIS AGREEMENT.
Black plate (8,1) Chapter 02 Introduction 3 LIMITATION OF LIABILITY IN NO EVENT SHALL PIONEER BE LIABLE FOR ANY DAMAGES, CLAIM OR LOSS INCURRED BY YOU (INCLUDING, WITHOUT LIMITATION, COMPENSATORY, INCIDENTAL, INDIRECT, SPECIAL, CONSEQUENTIAL, OR EXEMPLARY DAMAGES, LOST PROFITS, LOST SALES OR BUSINESS, EXPENDITURES, INVESTMENTS, OR COMMITMENTS IN CONNECTION WITH ANY BUSINESS, LOSS OF ANY GOODWILL, OR DAMAGES) RESULTING FROM THE USE OF OR INABILITY TO USE THE SOFTWARE, EVEN IF PIONEER HAS BEEN INFORMED OF,
Black plate (9,1) Chapter Introduction 02 END USER LICENSE AGREEMENT NOTICE TO THE USER THIS IS A LICENSE AGREEMENT - AND NOT AN AGREEMENT FOR SALE - BETWEEN YOU AND HERE B.V. FOR YOUR COPY OF THE HERE NAVIGABLE MAP DATABASE, INCLUDING ASSOCIATED COMPUTER SOFTWARE, MEDIA AND EXPLANATORY PRINTED DOCUMENTATION PUBLISHED BY HERE (JOINTLY “THE DATABASE”). BY USING THE DATABASE, YOU ACCEPT AND AGREE TO ALL TERMS AND CONDITIONS OF THIS END USER LICENSE AGREEMENT (“AGREEMENT”).
Black plate (10,1) Chapter 02 10 Introduction Engb <127075005641>10
Black plate (11,1) Chapter Introduction 02 Important safety information ! Modifications related to roads, streets/highways, terrain, construction and other things before/during the development period may not be reflected in this database. Inevitably, those modifications after that period are not reflected in this database. ! Regardless of existing and newly-built things, the data may be different from the actual condition.
Black plate (12,1) Chapter 02 Introduction CAUTION When a route is calculated, the route and voice guidance for the route are automatically set. Also, for day or time traffic regulations, only information about traffic regulations applicable at the time when the route was calculated is considered. One-way streets and street closures may not be taken into consideration.
Black plate (13,1) Chapter Introduction ! Never use headphones while driving. These calculations are based only on the information that you provide and not on any data from the vehicle. The fuel mileage displayed is only a reference value, and does not guarantee the fuel mileage displayed can be obtained. Traffic information ! Pioneer does not bear responsibility for the accuracy of the information transmitted.
Black plate (14,1) Chapter 02 Introduction ! If data loss or corruption occurs on the storage device for any reason, it is usually not possible to recover the data. Pioneer accepts no liability for damages, costs or expenses arising from data loss or corruption. ! Never insert or eject an SD memory card while driving. ! Do not insert anything other than SD memory cards into the SD card slot.
Black plate (15,1) Chapter Introduction 1 Insert an SD memory card into the SD card slot. 02 Resetting the microprocessor 2 Gently press the card in against the spring latch until it stops, then release. The card will lock firmly into place inside the SD card slot. The microprocessor should be reset under the following conditions: ! Prior to using this product for the first time after installation. ! If this product fails to operate properly.
Black plate (16,1) Chapter Before you start 03 On first-time startup When you use the navigation system for the first time, an initial setup process starts automatically. Follow the steps below. 1 5 Read the terms carefully, checking its details, and then touch [Accept] if you agree to the conditions. Start the engine to boot up the system. 2 Wait approximately 10 seconds, and then press the MODE button of the AV receiver. After a short pause, the navigation splash screen appears.
Black plate (17,1) Chapter Before you start 9 If needed, modify the default route planning options, then touch [Next]. 03 wait (approximately 10 seconds) after restart before pressing the MODE button. Before you start p Later you can change them in “Route Settings”. = For details, refer to Modifying the route calculation conditions on page 41. p You can restart the configuration wizard later from the “Settings” menu. = For details, refer to Starting the configuration wizard on page 61.
Black plate (18,1) Chapter 04 How to use the navigation menu screens Screen switching overview Navigation screen Press the MODE button of the AV receiver. AV receiver screen (e.g.
Black plate (19,1) Chapter How to use the navigation menu screens What you can do on each menu p You can customise the menu options. = For details, refer to Customising the quick menu on page 56. 3 “Navigation Menu” screen Touch [Menu] on the map screen to display the “Navigation Menu” screen. This is the starting menu to access the desired screens and operate the various functions. 4 “Find” menu You can search for your destination on this menu.
Black plate (20,1) Chapter 04 How to use the navigation menu screens p When entering text, the first character appears in upper case while the rest of to the text is in lower case. Touch enter an upper case letter or touch twice to turn on Caps Lock. Touch again and lower case letters return. 3 Back The previous screen returns. Touching and holding [Back] returns to the map screen. 4 More Touching [More] switches to another keyboard layout, for example from an English keyboard to a Greek keyboard.
Black plate (21,1) Chapter How to use the map 05 Most of the information provided by your navigation system can be seen on the map. You need to become familiar with how information appears on the map. How to read the map screen 1 a 3 4 9 How to use the map b 2 5 6 7 p Information with an asterisk (*) appears only when the route is set. p Depending on the conditions and settings, some items may not be displayed.
Black plate (22,1) Chapter 05 How to use the map Touching this field displays route information during navigation. By default, only one data field is displayed. Touch this field to see all data fields. Icon Description Keep left. = For details, refer to Browsing the data field on page 24. Continue straight in the intersection. 9 Current route* The route currently set is highlighted in colour on the map. = For details of the POI icons, refer to Customising the map screen settings on page 58.
Black plate (23,1) Chapter How to use the map 2 Touch [Show Map] on the “Navigation Menu” screen. The map screen appears showing the current position (a blue arrow by default), recommended route (an orange line) and surrounding map area. Checking the detailed information about the current position You can get the detailed information about the current position (or about the last known position if GPS reception is not available) from the “Where Am I?” screen.
Black plate (24,1) Chapter 05 How to use the map Browsing the data field The data fields are different when you are navigating the current route and when you have no specified destination (the orange line is not displayed). The data field provides the following information.
Black plate (25,1) Chapter How to use the map An icon showing a petrol station or a restaurant will appear on the map during you are driving on motorways. Touch the icon to open the details of the next few exits or service stations. 05 3 Touch or to change the map scale. Motorway exit services Operating the map screen Changing the scale of the map You can change how much of the map is displayed on the screen with street names and other text displayed in the same font size. 1 Display the map screen.
Black plate (26,1) Chapter How to use the map 05 p The map orientation is fixed at “Heading up” when the 3D map screen is displayed. 1 3 Touch / to tilt up/down or rotate left/right. = For details of the operations, refer to Screen switching overview on page 18. 3 Touch to switch the map orientation. to p Touching the key once modifies the view in large steps and touching and holding the key modifies it continuously and smoothly. Display the map screen.
Black plate (27,1) Chapter How to use the map 05 Scrolling the map to the position you want to see 1 Display the map screen. = For details of the operations, refer to Screen switching overview on page 18. 2 Touch and drag the map in the desired direction to scroll. How to use the map p Positioning the cursor to the desired location results in a brief information overview about the location being displayed at the top of the screen, with street name and other information for this location being shown.
Black plate (28,1) Chapter Searching for and selecting a location 06 p Some information regarding traffic regulations depends on the time when the route calculation is performed. Thus, the information may not correspond with a certain traffic regulation when your vehicle actually passes through the location in question. Also, the information on the traffic regulations provided applies for a passenger vehicle, and not for a truck or other delivery vehicles.
Black plate (29,1) Chapter Searching for and selecting a location Searching for a location by entering the midpoint of a street You can also navigate to the midpoint of a street if the house number is not available. 3 06 If necessary, modify the country. = For details of the operations, refer to Searching for a location by address on page 28. 4 Touch [Town] and enter the name of the city/town on the keyboard. 1 Touch [Menu] on the map screen. The “Navigation Menu” screen appears.
Black plate (30,1) Chapter 06 Searching for and selecting a location 4 Touch [Town] and enter the name of the city/town using its postcode. Searching for Points of Interest (POI) Information of various facilities (Points Of Interest – POI), such as petrol stations, car parks or restaurants, is available. You can search for a POI by using the “Quick Search” feature, or by selecting the category (or entering the POI name). p To open the numeric keypad, touch .
Black plate (31,1) Chapter Searching for and selecting a location 06 p When the route is set, accommodation is searched around the destination of the route. p When the route is not set, they are searched around the current position. p When the current position is not available either (no GPS signal), they are searched around the last known position. The list of places opens with names containing the entered character sequence. 5 Scroll the list and touch the place you want. 3 Touch the POI you want.
Black plate (32,1) Chapter Searching for and selecting a location 06 2 Touch [Find], then [Find Places]. 3 Touch [Custom Search]. 5 Select one of the main place categories (e.g. Accommodation) or touch [List All Places]. 4 Select the area around which the POIs should be searched for. The screen appears showing all places around the selected location or along the route. ! In a Town: Searches for a place within a selected city/ town.
Black plate (33,1) Chapter Searching for and selecting a location = For subsequent operations, refer to Setting a route to your destination on page 38. Searching for a POI directly from the name of the facilities tion. (The result list will be ordered by the distance from this position.) ! Around Destination: Searches for a place around the destination of the current route. (The result list will be ordered by the distance from the destination.
Black plate (34,1) Chapter Searching for and selecting a location 06 8 Using the keyboard, start entering the name of the place. (or around the last known position if the current position is not available). ! Car Repair Around Here: Car repair and roadside assistance services ! Health Around Here: Medical and emergency services ! Police Around Here: Police stations ! Petrol Station Around Here: Petrol stations 9 After entering a few letters, touch [Results].
Black plate (35,1) Chapter Searching for and selecting a location 4 Move and scale the map to locate your destination. 3 06 Touch [Favourites]. The list of “Favourites” destinations appears. = For details, refer to Setting a route to your destination on page 38. p You can also select a map location as the destination by scrolling the map. = For details, refer to Searching for a location by scrolling the map on page 37. = For details, refer to Modifying the route calculation conditions on page 41.
Black plate (36,1) Chapter 06 Searching for and selecting a location Selecting a location you searched for recently The places that you set as destinations or waypoints previously are automatically stored in “History”. Smart History Two of the most recently set destinations are shown in the “History” field for easier access. 4 Touch the entry you want. The searched location appears on the map screen. = For subsequent operations, refer to Setting a route to your destination on page 38.
Black plate (37,1) Chapter Searching for and selecting a location 06 Searching for and selecting a location 5 When finished, touch [Done]. The searched location appears on the map screen. = For subsequent operations, refer to Setting a route to your destination on page 38. Searching for a location by scrolling the map Specifying a location after scrolling the map enables you to set the position as destination, waypoint. 1 Display the map screen.
Black plate (38,1) Chapter After the location is decided 07 Setting a route to your destination 3 Touch [Go!]. Your navigation system starts the route guidance. You can set a route to your destination by using either a searched location or the “My Route” menu. # Touch [More] to modify route parameters. Setting a route using a searched location 1 Search for a location. = For details, refer to Searching for and selecting a location on page 28.
Black plate (39,1) Chapter After the location is decided 5 Touch any of the alternatives to see it on the map. 3 Touch [Create Route]. p The start point of the route, normally it is the current GPS position, is displayed. 4 Touch . 6 Select one of the alternatives and touch [Back]. p When the “Create Route” option is not displayed, touch [More] to open a list with more options. The previous screen returns. The navigation system calculates the route.
Black plate (40,1) Chapter 07 After the location is decided 6 Touch [Go] to confirm the destination. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. p If you have already set the route to the destination, [Next] will appears. Touch [Next] and select the way to modify the current route. = For details, refer to Selecting a new destination when a route is already set on page 47. 7 Touch [Go!].
Black plate (41,1) Chapter Checking and modifying the current route Displaying the route overview 1 Touch [Menu] on the map screen. The “Navigation Menu” screen appears. = For details of the operations, refer to Screen switching overview on page 18. 2 Touch [My Route] on the “Navigation Menu” screen. 3 Touch [Overview]. The current route is displayed in its full length on the map together with additional information and controls.
Black plate (42,1) Chapter Checking and modifying the current route 08 ! Private roads, resident-only roads and walkways are excluded from routes. ! Default Taxi: ! Manoeuvre restrictions and directional constraints are taken into account when planning a route. ! Roads are used only if access for taxis is allowed. ! Private roads, resident-only roads and walkways are excluded from routes. ! Default Lorry*: ! Manoeuvre restrictions and directional constraints are taken into account when planning a route.
Black plate (43,1) Chapter Checking and modifying the current route 5 Touch next to the vehicle profile that you want to modify. 6 Scroll the list and touch any of the lines to change the parameters. Set the maximum speed you travel with the vehicle. ! Use Extended Settings: Check this box to enable more settings for the following parameters. ! Length: Set the total length of the vehicle. ! Width: Set the width of the vehicle. ! Height: Set the height of the vehicle.
Black plate (44,1) Chapter Checking and modifying the current route 08 Setting the route calculation route type is rarely practical for normal vehicles. ! Economical: For vehicle types where “Green” routing is not available, this method combines the benefits of “Fast” and “Short”. This system calculates as if it were calculating the “Fast” route, but it takes other roads as well to save fuel. p This item is available for AVIC-F160 only.
Black plate (45,1) Chapter Checking and modifying the current route 4 Touch any of the listed road types. If needed, scroll the list for all road types. The following options can be set for route calculation: If the selected routing method is not “Green”, you can have your route compared to the best green alternative on the screen when confirming the route. If this alternative is much better than the selected method, you can quickly switch to “Green” mode. 5 Touch [Back] to confirm the changes.
Black plate (46,1) Chapter Checking and modifying the current route 08 5 When finished, touch and hold [Back]. The map screen returns. Setting driving time alerts p This function is only available on AVICF160. You can set countdown timers to alert you when you need a break or a sleep. This feature can be set for one driver or two alternative drivers. 1 Touch [Menu] on the map screen. The “Navigation Menu” screen appears. = For details of the operations, refer to Screen switching overview on page 18.
Black plate (47,1) Chapter Checking and modifying the current route 08 Selecting a new destination when a route is already set the route to a different location than the current GPS position. If you already have a recommended route and you select a new destination, the navigation system will ask you whether to start a new route, add a new waypoint to the route or append the newly selected destination at the end of the current route. 1 Touch [Menu] on the map screen.
Black plate (48,1) Chapter Checking and modifying the current route 08 6 Select the start point of the route the same way as you select a destination. 2 Touch [My Route] on the “Navigation Menu” screen. 3 Touch [Edit Route] when you already have a route. 7 Touch [Set Start]. 8 Select [Go] when the new start point is set. The map screen returns with a transparent arrow mark (showing that there is no GPS reception).
Black plate (49,1) Chapter Checking and modifying the current route Checking route alternatives for the current route 08 6 Select one of the alternatives and touch [Back]. To recalculate the current route with a different route planning method, you can modify the settings for the route calculation (refer to Checking and modifying the current route on page 41). There is another way to do this and to compare different route alternatives with the same route planning method. The map screen returns.
Black plate (50,1) Chapter 08 Checking and modifying the current route 4 Scroll down the list and touch [Simulate Navigation]. destinations in a straight line regardless of the road network and traffic regulations. 1 Touch [More...], then [Settings]. 2 Touch [Route Settings]. 3 Touch [Navigation Mode], then select [Off-road]. The simulation starts from the starting point of the route, and using a realistic speed, it leads you through the whole recommended route.
Black plate (51,1) Chapter Registering and editing locations 09 Saving a location as an alert point Storing your favourite locations as “Favourites” provides you with the opportunity to save the time and effort of re-entering this information. “Favourites” can include your home location, favourite places, destinations you have already registered and any location on the map. Alert points are preloaded in your navigation system.
Black plate (52,1) Chapter Registering and editing locations 09 9 Set the necessary parameters. ! Type of Alert: Set the type of alert point. ! Direction of Alert: Set the direction from which you expect the alert. ! Speed Limit: Set the speed limit for this alert point (if applicable). 3 Scroll down the list and touch [Edit Alert Point]. 4 Modify the necessary parameters. 10 Touch [Save]. The location is saved as a new alert point.
Black plate (53,1) Chapter Using traffic information ! If you want to use the Traffic information function in Russia, access www.naviextras.com beforehand and activate the service. ! The service activation is subject to fees. Checking historical traffic information When this feature is enabled on the “Traffic” settings menu, the navigation system can take the traffic information into account when planning a route. For settings, follow the steps below. 1 Touch [Menu] on the map screen.
Black plate (54,1) Chapter Using traffic information 10 p When the traffic data is available, a 2D map is displayed with road segments coloured by the severity of traffic incidents. Touch the event type icon at the road segment and then touch to get information about the traffic incident. p TMC is not a global service. It may not be available in your country or region. Ask your local dealer for coverage details.
Black plate (55,1) Chapter Customising preferences 11 Displaying the settings screen 1 Touch [Menu] on the map screen. The “Navigation Menu” screen appears. = For details of the operations, refer to Screen switching overview on page 18. 2 Touch [More...]. 3 Touch [Settings]. 4 Touch the setting item. ! You can adjust the sound volume, mute your device or change the voice guidance language. 1 ! Display the settings screen.
Black plate (56,1) Chapter 11 Customising preferences The maximum speed set in the vehicle profile is also used for this warning. This system alerts you if you exceed the preset value even if the legal speed limit is higher. This setting lets you decide whether you wish to receive visible and/or audible warnings. Adjust the slider to set the relative speed above which the application initiates the warning.
Black plate (57,1) Chapter Customising preferences ! ! ! ! ! ! ! ! ! ! ! ! ! Displays the GPS information screen with satellite position and signal strength information. ! Configure Driving Timers: Displays the screen for setting the driving timers. p This item is available for AVIC-F160 only. Setting the traffic information The recommended route is not always the same between two points. Whenever suitable data exists, traffic information can be taken into account in the route calculation.
Black plate (58,1) Chapter Customising preferences 11 You can also set the minimum delay that triggers route recalculation, and you can instruct the application if you want to confirm every recalculation. ! Event Types: Touch this key to open the list of traffic event types, and select which events to take into account in route calculation. Setting the user profiles If more drivers use this navigation system, their settings can be remembered by using one of the user profiles.
Black plate (59,1) Chapter Customising preferences Setting the visual guidance Adjust how this system helps you navigate with different kinds of route related information on the map screen. 1 Display the settings screen. = For details of the operations, refer to Displaying the settings screen on page 55. 2 3 Touch [Visual Guidance Settings]. Touch the setting item. ! Data Fields: The data fields in the corner of the map screen can be customised. Touch this key and select the values you want to see.
Black plate (60,1) Chapter 11 Customising preferences ! ! ! ! 60 If you are approaching a motorway exit or a complex intersection and the needed information exists, the map is replaced with a 3D view of the junction. You can turn this feature on or let the map be displayed for the whole route. Tunnel View: When entering tunnels, the surface roads and buildings can be distracting. This feature shows a generic picture of a tunnel instead of the map.
Black plate (61,1) Chapter Customising preferences 11 Customising the regional settings Monitor” is available from the “More...” menu. These settings allow you to customise this system for your local language, measurement units, time and date settings and formats, as well as to choose the time zone. 1 1 Display the settings screen. = For details of the operations, refer to Displaying the settings screen on page 55. 2 3 Touch [Regional]. 2 4 Touch the setting item.
Black plate (62,1) Chapter Customising preferences 11 3 Select the language that you want to use for voice guidance messages, then touch [Next]. p Later you can change it in “Sound and Warnings” settings. = For details, refer to Setting the volume and the guidance voice for navigation system on page 55. 4 If needed, modify the time format and unit settings, then touch [Next]. p Later you can change it in “Regional” settings. = For details, refer to Customising the regional settings on page 61.
Black plate (63,1) Chapter Other operations 12 More menu The “More...” menu provides you with various options and additional applications. ! 1 Touch [Menu] on the map screen. The “Navigation Menu” screen appears. = For details of the operations, refer to Screen switching overview on page 18. 2 3 Touch [More...]. Touch the desired menu item.
Black plate (64,1) Chapter 13 Installation Important safeguards WARNING Pioneer does not recommend that you install your navigation system yourself. This product is designed for professional installation only. We recommend that only authorised Pioneer service personnel, who have special training and experience in mobile electronics, set up and install this product. NEVER SERVICE THIS PRODUCT YOURSELF.
Black plate (65,1) Chapter Installation WARNING OF ACC O F STAR STAR T ACC position O N F N OF ! The black lead is earth. Please earth this lead separately from the earth of high-current products such as power amps. Do not earth more than one product together with the earth from another product. For example, you must separately earth any amp unit away from the earth of this navigation system.
Black plate (66,1) Chapter 13 Installation Precautions before installation CAUTION ! Never install this product in places where, or in a manner that: ! Could injure the driver or passengers if the vehicle stops suddenly. ! May interfere with the driver’s operation of the vehicle, such as on the floor in front of the driver’s seat, or close to the steering wheel or gearstick. ! Make sure there is nothing behind the dashboard or panelling when drilling holes in them.
Black plate (67,1) Chapter Installation 13 Insert one end of the RGB cable into the “DATA BUS” slot on the side of this product and secure it with an 11 mm (.4 in) screw (supplied). Connect the other end of the cable to RGB IN input on the back of your Pioneer AV receiver. Installation Connecting the system AV receiver RGB cable (supplied) TMC aerial (supplied) Attach the GPS aerial to the “GPS ANTENNA” jack on the side of this product. 2m 2.65 m Secure the RGB cable with the 11 mm (.
Black plate (68,1) Chapter Installation 13 Installing with the hook and loop fastener 1 Thoroughly wipe off both surfaces before affixing the hook and loop fastener. 2 Peel off the protective sheet and attach the hook and loop fastener. Navigation unit Protective sheet 3 Decide on the installation position. 4 Peel off the other protective sheet and install the navigation unit on the surface of the glove box or similar location.
Black plate (69,1) Appendix Appendix Positioning technology The Global Positioning System (GPS) uses a network of satellites orbiting the Earth. Each of the satellites, which orbit at a height of 21 000 km, continually broadcasts radio signals giving time and position information. This ensures that signals from at least three can be picked up from any open area on the earth’s surface. The accuracy of the GPS information depends on how good the reception is.
Black plate (70,1) Appendix Appendix ! If you make a slight turn. ! If the road has a series of hairpin bends. ! If there is a parallel road. ! If there is a loop or similar road configuration. ! If there is another road very nearby, such as in the case of an elevated motorway. ! If you take a recently opened road that is not on the map. ! If you drive in zigzags. 70 ! If you take a ferry. ! If you are driving on a long, straight road or a gently curving road.
Black plate (71,1) Appendix Appendix ! If you enter or exit a multi-storey car park or similar structure using a spiral ramp. ! When you drive around a roundabout. Appendix ! If your vehicle is turned on a turntable or similar structure. ! When starting driving immediately after starting the engine. Route setting information Route search specifications Your navigation system sets a route to your destination by applying certain built-in rules to the map data.
Black plate (72,1) Appendix Appendix ! If the destination is too far, there may be instances where the route cannot be set. (If you want to set a long-distance route going across several areas, set waypoints along the way.) ! During voice guidance, turns and intersections from the motorway are announced. However, if you pass intersections, turns, and other guidance points in rapid succession, some may delay or not be announced.
Black plate (73,1) Appendix Appendix Display information Page Appendix Page More... Find Find Address 28 Find Places 30, 31 Find on Map 34 Favourites 35 History 36 Coordinate 36 Updates and Extras Unit Converter Clothing Calculator Fuel Consumption 63 Sunrise & Sunset Trip Monitor My Route Create Route 39 Edit Route 47, 48 Overview 41 Avoidances 41 Cancel Route 48 Country Information Help More...
Black plate (74,1) Appendix Appendix Glossary Current location The present location of your vehicle; your current location is shown on the map by a blue triangle mark (default). Destination A location you choose as the end point of your journey. Favourites A frequently visited location (such as your workplace or a relative’s home) that you can register to allow easy routing. GPS Global Positioning System. A network of satellites that provides navigation signals for a variety of purposes.
Black plate (75,1) Appendix Appendix Specifications General Appendix Rated power source ............... 14.4 V DC (allowable voltage range: 12.0 V to 14.4 V DC) Earthing system ....................... Negative type Maximum current consumption ..................................................... 0.21 A Dimensions (W × H × D): ............................................... 134 mm × 29 mm × 84 mm Weight .......................................... 140 g Tolerable temperature range: Power on ...............
Black plate (76,1) PIONEER CORPORATION 1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, JAPAN PIONEER EUROPE NV Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium/Belgique TEL: (0) 3/570.05.11 PIONEER ELECTRONICS (USA) INC. P.O. Box 1540, Long Beach, California 90801-1540, U.S.A. TEL: (800) 421-1404 © 2014 PIONEER CORPORATION. All rights reserved.
