User manual

(+
Most of the information provided by your navigation system
can be seen on the map. You need to become familiar with how
information appears on the map.
H"I&#"&)$*>&#2$&,*9&%3)$$'
5
4
1
2
3
6
7
9
8
p The following information marked with an asterisk (*)
appears only when a route is set.
p
Depending on the conditions and settings, some items may
not be displayed.
1
Shows the number and name of the street to be used (or
next guidance point).*
2
Shows the next guidance point (manoeuvre).*
The type of the event (turn, roundabout, exiting motorway,
etc.) is displayed.

Refer to Frequently shown route events on page 13
3
Shows the distance to the next guidance point
(manoeuvre).*
4
Shows the maneuver after the next maneuver.*
5 Indicates the current location of your vehicle. The apex of the
triangular mark indicates your orientation and the display
moves automatically as you drive.
p
When there is no GPS position, the triangular mark is
transparent. It shows your last known position.
6
Displays the data field.
7 Shows the name of the street (or city) that your vehicle is
travelling on (or in).
8
Indicates the current route.*
The route currently set is highlighted in colour on the map.
9
Indicates the progress to the final destination.*
:J&('/"),*#("'&4*)
AV information is displayed at the bottom of the map screen.
12 3 4
1 Touc h to di sp la y the AV sou rc e lis t.
2 Shows the current status of AV source briefly.
3 You can turn on or off the communication between the
"#$6)*!6(";; and the navigation system by touching the key.
p This setting is always turned on when you use the
"#$6)*!6(";; on an iPod / iPhone (the setting cannot
be changed).
4
Touc h to disp la y th e pho ne m en u sc re en .
 Refer to Displaying the phone menu screen on page 32
K9$)*#('1&#2$&,*9&%3)$$'
@2*'1 ('1&#2$&%3*+$&"/&#2$&,*9&
,*'6*++-
By default, even if the map scale is changed on the scrolled
map, it will return to the preset scale (according to the setting
in “#H8O;CH:=”of the “!3JHD3=HC:(,3;” settings) when the
current position map is displayed. If you change the scale of the
current position map, perform the following procedure.
1 Press the ,"1 button and touch .
2 Touch , and then touch [)8==H:DG].
3 Touch [!3JHD3=HC:(,3;], and then [,3;(
@HG;B3K].
4 Touch [#H8O;CH:=].
5 Drag the pop-up window and touch [,3:<3B].
6 Press the ,"1 button.
7 Touch or .
<,*)#&L"",
Your navigation system features “Smart Zoom” that works in
two ways:

When the route is set:
When approaching a turn, “Smart Zoom” will zoom in and
raise the view angle to enable you to easily recognise your
manoeuvre at the next junction. If the next turn is at a dis-
tance, it will zoom out and lower the view angle to be flat so
you can see the road in front of you.

When the route is not set:
“Smart Zoom” will zoom in if you drive slowly and zoom out
when you drive at high speed.
<I(#3 2('1&4$#I$$'&M5N&O5N&*'>&M5&
!")#2&69&0($I%
You can switch how the map is displayed. For 2D map view
mode, you can select between “Heading up” and “North up”.

Heading up:
The map display always shows the vehicle’s direction as
proceeding toward the top of the screen.

North up:
The map display always has north at the top of the screen.
p
The map orientation is fixed at “Heading up” when the 3D
map screen is displayed.
1 Press the ,"1 button.
2 Touch .
3 Touch the following key.
Each time you touch the key the setting changes.
Indicates 2D Heading up view mode is
currently selected.
Indicates 3D Heading up view mode is
currently selected.
Indicates 2D North up view mode is
currently selected.
p
There is a limit to map scaling in 3D map view mode. If the
map scale is zoomed out further, the map is zoomed out in
2D map.
:-;8/-86108/<08@59
!"#$%&'(')%"*
:-;8/-86108/<08@59