User manual

(O

For information about route calculation conditions, refer
to -C<=8(1B3::H:D(,8=EC? on page 25
5 Touch [)8B84=].
The selected route is applied as your current route.
@2$3A('1&>$#"6)&)"6#$%
You can check for detour routes that avoid the selected sections
or streets, or that avoid the road ahead. You can also check for
alternative routes.
1 Press the ,"1 button and touch .
2 Touch [@8=C<9G(X("B=89:3=HJ8G].
3 Touch one of the options.
 "B=89:3=HJ8(-C<=8G:
Shows the alternative routes.

Refer to Checking route alternatives on page 18

"JCH?();84H3B()84=HC:G:
Shows the route avoiding certain sections. Touch the list
item to select the section you want to avoid. The distance
and time difference, suggested route, current route, and
the section avoided are shown. Touch ["448;=] to apply the
suggested route.

UNHCÄ2ODBH×BÄ1N@C:
Shows the route avoiding certain road. Touch the list item to
select the road you want to avoid. Distance and time differ-
ence, suggested route, current route, section avoided are
shown. Touch ["448;=] to apply the suggested route.

"JCH?(-C3?("E83?:
Shows the route avoiding the road ahead. Touch [/] or [0] to
set the distance you want to avoid. Touch ["JCH?] to apply
the suggested route.

-8G=C98('9HDH:3B(-C<=8:
Cancels the route with avoidances and restores the previous
route.
p
The route set by ["B=89:3=HJ8(-C<=8G] cannot be
cancelled.
@2$3A ('1&)"6#$&('/"),*#("'&*'>&
9)$/$)$'3$%
Once you set the route, you can check a summary of the current
route.
1 Press the ,"1 button and touch .
2 Touch [-C<=8()<7739K].
3 Touch one of the options.
3
1 2
The conditions of the displayed route is shown in the upper left
by icon. The total length of the route and approximate required
time for the route in the lower left.
p
You can scroll the map by dragging the map.
1 Shows alternative routes.
 Refer to Checking route alternatives on page 18
2
Displays the shortcuts.
 -C<=8(198Q898:48G:
Shows the route setting preferences. If you change the
preferences, the route is recalculated.

$=H:8939K:
Shows all transit points in detail. Touch a transit point to
show its position on the map. If you touch ["JCH?] on the
map screen, the route is recalculated avoiding the transit
point (as much as possible).

)3J8(-C<=8:
Saves the displayed route. The saved route can be recalled
later.

1B348G("BC:D(-C<=8:
Searches for POIs along the displayed route. Touch the
POI to show the “,3;(.C43=HC:” screen, and also set the
POI as a waypoint.

)H7<B3=HC::
You can run a simulation of the navigation for the current
route, as a demonstration.

Refer to Watching the simulation of the route on page 19
3
Shows the information for a transit point on the route.
Touching the items allows you to see the location on the
map. Touch ["JCH?] and ["448;=] to set the location as a
location to avoid.
@*'3$ ++('1&#2$&36))$'#&)"6#$&
16(>*'3$
If you no longer need to travel to your destination, follow the
steps below to cancel the route guidance.
1 Press the ,"1 button and touch .
2 Touch [63:48B(-C<=8] or [@8B8=8(F3K;CH:=].
3 Touch one of the options.
If there are no waypoints on the route, touch [63:48B(-C<=8] to
cancel the route.
If there are waypoints on the route, touch [63:48B(-C<=8] to
cancel the route. Touch [@8B8=8(F3K;CH:=] to delete only the
nearest waypoint. In such case, the route is recalculated.
W*#32('1&#2$&%(,6+*#("'&"/&#2$&)"6#$
You can run a simulation of the navigation for the current route,
as a demonstration.
1 Set a route to your destination.
 Refer to Searching for a destination on page 14
2 Press the ,"1 button and touch .
3 Touch [-C<=8()<7739K], and then touch .
4 Touch [)H7<B3=HC:].
The simulation starts from the starting point of the route, and
using a realistic speed, it leads you through the whole recom-
mended route.
 Touch [6BCG8] to stop the simulation.
!"#$%&'(')%"*
$<04D7.?85.C8@-C7BE7.?8/<0846330./83-6/0