User manual

+(
<*0('1&*&+"3*#(" '&*%&*'&*+$)#&
9"('#
Important
The warning for road safety cameras (like speed cameras) is
disabled when you are in certain countries where warnings
for road safety cameras are prohibited. However, you are
fully responsible for ensuring that this feature is legal in the
country where you intend to use it.
You can save any map location (such as a school zone or railroad
crossing) as an alert point.
p
To use this function, activate the warnings beforehand and
set the alert types.

Refer to “F39:H:DG” settings on page 26
1 Press the ,"1 button.
2 Scroll the map and select a location.
The cursor appears at the selected point.
3 Touch .
4 Touch ["??("B89=(1CH:=G].
5 Set the necessary parameters.
 "B89=(&K;8:
Sets the type of the alert point.

);88?(.H7H=:
Sets the speed limit for this alert point (if applicable).

@H984=HC::
Sets the direction from which you expect the alert to come
from.
6 Touch [)3J8].
p In ["B89=(&K;8], speed camera alert cannot be selected when
the cursor is placed on the map of France.
F>(#('1&#2$&%#")$>&*+$)#&9"('#%
Stored alert points can be edited.
1 Press the ,"1 button.
2 Scroll the map and move the cursor over the
stored alert point, and then touch .
3 Touch [+?H=("B89=(1CH:=G].
4 Set the necessary parameters.
 If you touch and then touch [@8B8=8], the
selected alert point will be deleted.
5 Touch [+?H=].
The Traffic Message Channel (TMC) provides real-time traffic
reports. If the navigation system is equipped with the TMC
feature, you can check the traffic reports and information
received.
p
The online function in “3Q@E×B ” can be used if you connect
an iPhone or a smartphone that has the "#$6)*!6(";;
installed.

Be sure read Expanding the use of the navigation functions
(page 29) before using the "#$6)*!6 function.
#HROK@XHMFÐSGDÐj3Q@EÆBÐ
<6,,*)-V&%3)$$'
1 Press the ,"1 button and touch .
2 Touch [3Q@E×B].
The “3Q@E×BÄ2TLL@QX” screen appears.
5HDVHMFÐSGDÐSQ@EÆBÐKHRS
Traffic information is displayed onscreen in a list. This allows you
to check how many traffic incidents have occurred, the loca-
tions, and the distance from your current position.
1 Display the “3Q@E×BÄ2TLL@QX” screen.
 Refer to Displaying the “3Q@E×BÄ2T LL@QX” screen on page
21
2 Touch [3Q@E×BÄ$UDMSR].
A list with traffic information that has been received is shown.
The list is sorted by distance from your current position. Places
(street names) where incidents have occurred are displayed on
the list.
5HFHLYLQJUHDOWLPHWUDI¿FLQIRUPDWLRQ70&
!"#$%&'(')%"*
F0?71/037.?85.C80C7/7. ?8G-45/7-.185.C8
3-6/01
F0407>7.?8305G%
WLPHWUDI¿FLQIRU%
PDWLRQ70&