User manual

&
!"#$%&"'&('#$)'*+&,$,")-
.$/")$&)$,"0('1&#2$&0$2(3+$&4*##$)-
If the battery is disconnected or discharged, the memory will be
erased and must be reprogrammed.

Some of the settings and recorded contents will not be reset.
5*#*&%647$3#&#"&$)*%6)$
The information is erased by disconnecting the yellow lead from
the battery (or removing the battery itself).

Some of the settings and recorded contents will not be reset.
8$%$##('1&#2$&,(3)"9)"3$%%")
CAUTION
Pressing the -+)+& button resets settings and recorded
contents to the factory settings.
—
Do not perform this operation when a device is connected
to this product.
—
Some of the settings and recorded contents will not be
reset.
The microprocessor must be reset under the following
conditions:

Prior to using this product for the first time after installation.
 If this product fails to operate properly.
 If there appears to be problems with the operation of the
system.

If your vehicle position is shown on the map with a signifi-
cant positioning error.
1 Turn the ignition switch OFF.
2 Press the -+)+& button with a pen tip or other
pointed implement.
 Refer to Checking part names and functions on page 4
Settings and recorded contents are reset to the factory settings.
:4"6#&#2(%&,*'6*+
This manual uses diagrams of actual screens to describe oper-
ations. However, the screens on some products may not match
those shown in this manual depending on the model used.
;$*'( '1%&"/&<-,4"+%&=%$>&('&?2(%&
;*'6*+
X0000BT
This indicates model name that are supported
the described operations.
This indicates to touch an appropriate soft key
on the touch screen.
HOLD
This indicates to touch and hold an appropri-
ate soft key on the touch screen.
This indicates that there is a reference or
supplementary for the key or screen.
@2$3A('1&9*)#&'*,$%&*'>&
/6'3#("'%
F88DAB F80DAB
1 2 3
4
5 6 7 8
9
b
a
F980DAB F980BT F9880DAB F9880BT
1
9
7
d
2
3
4
5
6
c
8
1 LCD screen
2 #'. (//0) button
230456/7-.)51748-9035/7-.
!"#$%&'(')%"*
230456/7-. )51748-9035/7-.