User manual

VZ
<$##('1&#2$&)$0$)%$>&(,*1$
The default setting is “'QQ”.
p
This setting is available only when you stop your vehicle in a
safe place and apply the handbrake.
p
This function is available when “"#($:;<=” is set to
“637893” or “>:?(637893($:;<=” is set to “':”.
1 Display the “)KG=87” setting screen.
 Refer to Displaying the “)KG=87” setting screen on page
58
2 Touch [637893(G8==H:DG].
3 Touch [>:?(637893[(-8J89G8(JH?8C] to switch
“':” or “'QQ”.
<$##('1&#2$&3*,$)*&/")&@*,$)*&
J($I&,">$
To disp la y Ca me ra Vi ew at all time s, “ 637893(#H8O” needs to be
set to “':”. (The same mode is turned on when
is touched
on the camera view screen. The setting value is synchronized.)
The default setting is “'QQ”.
p
To set the rear view camera as the camera for Camera View
mode, set “2345(637893($:;<=” to “':”.

Refer to Setting rear view camera activation on page 59
p
When using the second camera, set “"#($:;<=” to
“637893” or “>:?(637893($:;<=” to “':” (both settings are
synchronized).

Refer to Setting the second camera on page 59
1 Display the “)KG=87” setting screen.
 Refer to Displaying the “)KG=87” setting screen on page
58
2 Touch [637893(G8==H:DG].
3 Touch [637893(#H8O] to switch “':” or “'QQ”.
p You can also turn this function on by touching [637893(
#H8O] on the AV source selection screen or in the source
list.
<$##('1&#2$&%*/$&,">$
You can set the safe mode that regulate operating some func-
tions only when you stop your vehicle in a safe place and apply
the handbrake.
The default setting is “':”.
1 Display the “)KG=87” setting screen.
 Refer to Displaying the “)KG=87” setting screen on page
58
2 Touch [)3Q8(,C?8] to switch “':” or “'QQ”.
<$##('1&#2$&>$,"&,">$
The default setting is “':”.
1 Display the “)KG=87” setting screen.
 Refer to Displaying the “)KG=87” setting screen on page
58
2 Touch [@87C(,C?8] to switch “':” or “'QQ”.
<$+$3#('1&#2$&%-%#$,&+*'16*1$
p If the embedded language and the selected language setting
are not the same, text information may not display properly.
p
Some characters may not be displayed properly.
1 Display the “)KG=87” setting screen.
 Refer to Displaying the “)KG=87” setting screen on page
58
2 Touch [)KG=87(.3:D<3D8].
3 Touch the language.
8$0$)%('1&#2$&3+(,*#$&3"'#)"+&
%#*#6%&>(%9+*-
When the optional vehicle bus adapter is connected, the left/
right display of the climate control status screen can be reversed
if the display does not match that of the vehicle.
The default setting is “'QQ”.
1 Display the “)KG=87” setting screen.
 Refer to Displaying the “)KG=87” setting screen on page
58
2 Touch [6BH73=8(-8J89G8] to switch “':” or
“'QQ”.
<$##('1&#2$&A$-4"*)>&+*'16*1$&
I(#2&#2$&*99+(3*#("'&/")&(B2"'$
You can use the keyboard in ";;-3?HC(,C?8 by setting the
language of the keyboard for iPhone.
p
This function is only available in ";;-3?HC(,C?8 on the
iPhone.
1 Display the “)KG=87” setting screen.
 Refer to Displaying the “)KG=87” setting screen on page
58
2 Touch [A8KTC39?].
3 Touch the language.
:>76%#('1&#2$&)$%9"'%$&9"%(G
#("'%&"/&#2$&#"632&9*'$+&S#"632&
9*'$+&3*+(4)*#("'T
F80DAB F980DAB F980BT
If you feel that the touch panel keys on the screen deviate from
the actual positions that respond to your touch, adjust the
response positions of the touch panel screen.
p
This setting is available only when you stop your vehicle in a
safe place and apply the handbrake.
p
Do not use sharp pointed tools such as a ballpoint or
mechanical pen, which could damage the screen.
p
Do not turn off the engine while saving the adjusted position
data.
1 Display the “)KG=87” setting screen.
 Refer to Displaying the “)KG=87” setting screen on page
58
2 Touch [&C<4E(13:8B(63BHT93=HC:].
3 Touch two corners of the screen along the
arrows, and then touch the centres of two +
marks at the same time twice.
4 Press the button.
The adjustment results are saved.
5 Press the button once again.
Proceed to 16-point adjustment.
6 Gently touch the centre of the “+” mark dis-
played on the screen.
The target indicates the order.
 When you press the button, the previous
adjustment position returns.

When you press and hold the button, the
adjustment is cancelled.
7 Press and hold the button.
The adjustment results are saved.
!"#$%&'(')%"*
AE1/0@810//7.?1