User manual

VS
5(%9+*-('1&#2$&U:6>("V&%$##('1&
%3)$$'
1 Press the button.
2 Touch , and then .
=%('1&/*>$)E4*+*'3$&*>76%#,$'#
1 Display the “"<?HC” setting screen.
 Refer to Displaying the “"<?HC” setting screen on page 63
2 Touch [L3?89W23B3:48].
p Only the balance can be adjusted when “':” is selected in
“-839();83589”. Touch [23B3:48] and skip to step 4.

Refer to Setting the rear speaker output on page 63.
3 Touch or to adjust the front/rear speaker
balance.
p Set “L9C:=” and “-839” to “N” when using a dual speaker
system.
4 Touch or to adjust the left/right speaker
balance.

You can also set the value by dragging the point
on the displayed table.
<I(#32('1&%"6'>&,6#('1E
*##$'6*#("'
You can automatically mute or attenuate the AV source volume
and the iPhone or smartphone application volume when the
navigation outputs the guidance voice.
The default setting is “"&&”.
1 Display the “"<?HC” setting screen.
 Refer to Displaying the “"<?HC” setting screen on page 63
2 Touch [,<=8(.8J8B].
3 Touch the item.
 "&&:
The volume becomes 20 dB lower than the current volume.

,<=8:
The volume becomes 0.

'QQ:
The volume does not change.
:>76%#('1&%"6)3$&+$0$+%
)." (source level adjustment) lets you adjust the volume level of
each source to prevent radical changes in volume when switch-
ing between sources.
p
Settings are based on the FM tuner volume level, which
remains unchanged.
p
This function is not available when the FM tuner is selected
as the AV source.
1 Compare the FM tuner volume level with the
level of the source.
2 Display the “"<?HC” setting screen.
 Refer to Displaying the “"<?HC” setting screen on page 63
3 Touch [)C<948(.8J8B("?i<G=89].
4 Touch or to adjust the source volume.
p If you directly touch the area where the cursor can be moved,
the )." setting will be changed to the value of the touched
point.
p
“/f” to “0f” is displayed as the source volume is increased
or decreased.
p
The default setting is “N”.
<$##('1&#2$&)$*)&%9$*A$)&"6#96#
A rear speaker output of this product can be turned on or off.
The default setting is “':”.
1 Display the “"<?HC” setting screen.
 Refer to Displaying the “"<?HC” setting screen on page 63
2 Touch [-839();83589] to switch “':” or “'QQ”.
p If “'QQ” is selected, the rear speaker adjustment is not availa-
ble in “);83589(.8J8B”, “&H78("BHD:78:=” and “69CGGCJ89”.
<$##('1&#2$&%64I""/$)&"6#96#
This product is equipped with a subwoofer output mechanism,
which can be turned on or off.
The default setting is “':”.
1 Display the “"<?HC” setting screen.
 Refer to Displaying the “"<?HC” setting screen on page 63
2 Touch [)<TOCCQ89] to switch “':” or “'QQ”.
p If “'QQ” is selected, the rear speaker adjustment is not availa-
ble in “);83589(.8J8B”, “&H78("BHD:78:=” and “69CGGCJ89”.
:>76%#('1&#2$&36 #"//&/)$Q6$'3-&
0*+6$
You can adjust the cutoff frequency value of each speaker.
The following speakers can be adjusted:
L9C:=, -839, )<TOCCQ89
p
“-839” is available only when “-839();83589” is set to “':”.

Refer to Setting the rear speaker output on page 63
p
“)<TOCCQ89” is available only when “)<TOCCQ89” is set to
“':”.

Refer to Setting the subwoofer output on page 63
1 Display the “"<?HC” setting screen.
 Refer to Displaying the “"<?HC” setting screen on page 63
2 Touch [69CGGCJ89] or [)<TOCCQ89()8==H:DG].
3 Touch [<] or [>] to switch the speaker.
4 Drag the graph line to set the cutoff position.
5 Drag the lowest point of the graph to set the
cutoff slope.
p The following items can also be set.

⁂⁚⁓⁥⁗
:
Switches the subwoofer phase between normal and reverse
position.

.1L/S1L:
Switches the .1L/S1L setting to “':” or “'QQ”.
When it is turned off, the high-pass filter or low-pass filter of
each speaker can also be turned on by touching the graph
lines.
<$+$3#('1&#2$&+(%#$'('1&9"%(#("'
You can select a listening position that you want to make as the
centre of sound effects.
The default setting is “'QQ”.
1 Display the “"<?HC” setting screen.
 Refer to Displaying the “"<?HC” setting screen on page 63
2 Touch [.HG=8:H:D(1CGH=HC:].
3 Touch the desired position to change the lis-
tening position.
The following items are available:
'QQ, L9C:=Z., L9C:=Z-, L9C:=, "BB.
!6C7-85CM61/@0./1
!"#$%&'(')%"*
!6C7-85CM61/@0./1