User manual

J(
12
3
3 Touch [)8=(13GGOC9?].
4 Enter the password.
p 5 to 16 characters can be entered for a password.
5 Touch [%C].
6 Enter a password hint.
p Up to 40 characters can be entered for a hint.
7 Touch [%C].
p If you want to change the password currently set, enter the
current password and then enter the new one.
8 Check the password, and then touch ['A].
5$+$#('1&#2$&9*%%I")>
The current password and password hint can be deleted.
1 Display the “)KG=87” setting screen.
 Refer to Displaying the “)KG=87” setting screen on page
58
2 Touch
1
, followed by
2
, and then touch and
hold
3
.
 Refer to Setting the password on page 70.
3 Touch [6B839(13GGOC9?].
4 Touch [*8G].
5 Touch ['A].
6 Enter the current password.
7 Touch [%C].
A message indicating that the security setting is cancelled
appears.
8$%#")('1&#2(%&9)">63#&#"&#2$&
>$/*6+#&%$##('1%
You can restore settings or recorded content to the default
settings. Various methods are used to clear user data.
Method 1: Remove the vehicle battery
p Some of the settings and recorded contents will not be reset.
Method 2: Restore the default settings from the
“System” menu
 Refer to Restoring the default settings on page 71.
Method 3: Press the RESET button
 Refer to Resetting the microprocessor on page 4
p
Some of the settings and recorded contents will not be reset.
8$%#")('1&#2$&>$/*6+#&%$##('1%
CAUTION
Do not turn off the engine while restoring the settings.
p
This setting is available only when you stop your vehicle in a
safe place and apply the handbrake.
1 Display the “)KG=87” setting screen.
 Refer to Displaying the “)KG=87” setting screen on page
58
2 Touch ["#()C<948()8==H:DG].
3 Touch [-8G=C98()8==H:DG].
A message confirming whether to initialise the settings appears.
4 Touch the item you want to initialise.
 "BB()8==H:DG
Almost all settings or recorded content returns to the
default.

"<?HC()8==H:DG
p
This setting is available when the source is turned off.
 &E878()8==H:DG

2B<8=CC=E()8==H:DG
5 Touch [-8G=C98].
?)"64+$%2""#('1
If you have problems operating this product, refer to this section.
The most common problems are listed below, along with likely
causes and solutions. If a solution to your problem cannot
be found here, contact your dealer or the nearest authorised
Pioneer service facility.
@",,"'&9)"4+$,%
A black screen is displayed, and operation is not possible
using the touch panel keys.
A
“1CO89('LL” mode is on.
— Press any button on this product to release the mode.
A The rear view camera image is displayed with no camera
connection and the wrong camera polarity setting.
— Press and hold the ,"1 button to release the rear view
camera screen and then change the camera polarity
setting to “23==89K”.
B)"4+$,%&I(#2&#2$&:J&%3)$$'
CD or DVD playback is not possible.
A
The disc is inserted upside down.
— Insert the disc with the label upward.
A The disc is dirty.
— Clean the disc.
A The disc is cracked or otherwise damaged.
— Insert a normal, round disc.
A The files on the disc are in an irregular file format.
— Check the file format.
A The disc format cannot be played back.
— Replace the disc.
A The loaded disc is a type this product cannot play.
— Check what type of disc it is.
The screen is covered by a caution message and the video
cannot be shown.
A
The handbrake lead is not connected or the handbrake is not
applied.
— Connect the handbrake lead correctly, and apply the
handbrake.
A
The handbrake interlock is activated.
— Park your vehicle in a safe place and apply the handbrake.
No video output from the connected equipment.
A
The “"#($:;<=” or “"Uj($:;<=” setting is incorrect.
— Correct the settings.
The audio or video skips.
A
This product is not firmly secured.
— Secure this product firmly.
!990.C7O
!"#$%&'(')%"*
N/<038B6.4/7-.1 !990.C7O