Owner's Manual
Table Of Contents
- Operation Manual
- Resetting the microprocessor
- Contents
- Precaution
- Parts and Controls
- Protecting your product against theft
- Basic operation
- Navigation
- Menu screen view and operations
- Map Screen
- Searching for a destination
- Searching for a location by address
- Searching for Points of Interest (POI)
- Selecting a destination from stored locations
- Selecting a destination from stored routes
- Selecting a destination from history
- Searching for a location using [Combined Search]
- Searching for a location by the coordinates
- Searching for a location by scrolling the map
- Selecting the route options
- Starting the navigation
- Checking and modifying the current route
- Storing a location in [Saved Location]
- Storing a route in [Saved Routes]
- Receiving real-time traffic information (TMC)
- Checking useful information about your trip
- Navigation Settings
- Updating the map
- Bluetooth
- Wi-Fi
- AV source
- Setup for iPod®/iPhone®or smartphone
- HD Radio™ Technology
- Disc
- Compressed files
- iPod
- AppRadio Mode +
- Apple CarPlay™
- Android Auto™
- Pandora®
- SiriusXM® Satellite Radio
- HDMI
- AUX
- AV input
- Wireless Mirroring
- iDatalink
- Settings
- Favorite menu
- Other functions
- Appendix
- Troubleshooting
- Error messages
- Positioning technology
- Handling large errors
- Route setting information
- Handling and care of discs
- Playable discs
- Detailed information for playable media
- Bluetooth
- SiriusXM® Satellite Radio
- Wi-Fi
- HD Radio™ Technology
- SDXC
- WMA/WMV
- FLAC
- DivX
- AAC
- Google™, Google Play, Android
- Android Auto
- Detailed information regarding connected iPod devices
- Using app-based connected content
- Pandora®
- HDMI
- IVONA Text-to-Speech
- Specs
- Installation Manual
- Quick Start Guide
- Spec Sheet
- Warranty
- 142 -
English
[3D Calibration Status] Check the sensor learning status, such as the degree of
learning. You can also check the current sensor values and
the total number of speed pulses.
To delete the learned results stored in the sensor, follow
the below instructions.
1 Touch [Distance] or [Speed Pulse], and then touch
[Yes].
2 Touch [Learning] and then touch [Reset All].
TIP
Touch [Reset All] to reset the sensor after changing the
installation position or angle.
NOTE
If you touch [Reset Distance], all learned results stored in
[Distance] are cleared.
[Connection Status] Check that the leads are properly connected between this
product and vehicle.
[GPS Antenna] Displays the connection status of the GPS antenna ([OK] or
[NOK]) and the reception sensitivity.
NOTE
If reception is poor, change the installation position of the GPS
antenna.
[Positioning Status] Displays the positioning status (3D positioning, 2D
positioning, or no positioning), the number of satellites
used for positioning (orange), and the number of satellites
that have received signals (yellow). If signals from more
than three satellites are received, the current location can
be measured.
[Installation] Indicates whether the installation position of this product
is correct or not. If installed correctly, [OK] appears. When
this product is installed at an extreme angle exceeding the
limitation of the installing angle, [NOK(Inst. Angle)] is
displayed. If the installation of this product is continually
changed and it is not firmly fixed into place,
[NOK(Vibration)] is displayed.
[Speed Pulse] The speed pulse value detected by this product is shown.
[Illumination] Displays the status of headlights or small lamps of the
vehicle.
[Back Signal] When the shift lever is shifted to “R” (reverse position), the
signal switches to [High] or [Low]. The signal displayed
varies depending on the vehicle.
Menu Item Description
-
-
-