Owner's Manual

Displaying the information
screen
1 Press the HOME button to display the
“Top Menu” screen.
2 Touch
.
The “Information” screen appears.
3 Touch the item you want to configure.
Checking the connections
of leads
Check that leads are properly connected be-
tween the navigation system and vehicle.
Please also check whether they are connected
in the correct positions.
1 Display the “Information” screen.
= For details, refer to Displaying the informa-
tion screen on page 132.
2 Touch [System Information].
The “System Information Menu” screen ap-
pears.
3 Touch [Connection Status].
2
3
4
1
6
7
8
5
9
1 Speed Pulse
The Speed Pulse value detected by the navi-
gation system is shown. “0” is shown while
the vehicle is stationary.
2 Illumination
When the headlights or small lamps of a ve-
hicle are on, “On” is displayed. When the
small lamps of a vehicle are off, “Off” is dis-
played. (If the orange/white lead is not con-
nected, “Off” appears.)
3 Back Signal
When the shift lever is shifted to “R”, the
signal switches to “High” or “Low”. (One of
these is displayed depending on the vehi-
cle.)
4 Parking Brake
When the parking brake is applied, “On” is
displayed. When the parking brake is re-
leased, “Off” is displayed.
5 GPS Antenna
Indicates the connection status of the GPS
antenna, the reception sensitivity, and from
how many satellites the signal is received.
Color
Signal com-
munication
Used in posi-
tioning
Orange Yes Yes
Yellow Yes No
En
132
Chapter
27
Customizing preferences