Owner's Manual
Table Of Contents
- Quick Start Guide
- Operation Manual (Supplied on CD-ROM Only)
- Restore Default Settings
- Demo Mode
- Using This Manual
- Removing Faceplate
- Attaching Faceplate
- Table of Contents
- Parts & Controls
- Operation
- Basic Operation
- Parts & Controls
- Adjusting the LCD Panel Angle
- Inserting and Ejecting a Disc
- Inserting and Ejecting an SD Memory Card
- Plugging and Unplugging a USB Device
- Connecting and Disconnecting an iPod
- Startup and Termination
- First-Time Startup
- Regular Startup
- Using the Navigation Menu Screens
- Shortcut Menu
- Using the Touch Panel
- Swipe Action
- Using the Map
- Searching for and Selecting a Location
- After the Location is Decided
- Checking and Modifying the Current Route
- Editing the Data On the Use of Navigation Function
- Using Traffic Information
- Registering and Connecting a Bluetooth Device
- Using Hands-Free Phoning
- Basic Operations of the AV Source
- Using the Radio
- HD Radio
- Playing Audio CDs
- Playing Music Files on ROM
- Playing a DVD-Video
- Playing a DivX Video
- DVD-Video or DivX Setup
- Playing Music Files (from USB or SD)
- Playing Video Files (from USB or SD)
- Using an iPod
- Using Pandora
- Using Aha Radio
- Using the Bluetooth Audio Player
- Using the SiriusXM Tuner
- Using AV Input
- Using AppRadio Mode
- Customizing Preferences
- Setting the Anti-Theft Function
- Returning the Navigation System to the Default or Factory Settings
- Basic Operation
- Troubleshooting
- Messages
- Additional Information
- Glossary
- Specs
- Installation Manual
- Important Information for the User
- Scan of CD-ROM
- iPhone 5 / iPod 5th Gen Lightning Adaptor Note
- Warranty
Switching the muting/
attenuation level
You can select the muting/attenuation level of
“Mute Timing”. This setting is also effective
for a mute signal that has been received from
the MUTE lead connected to the navigation
unit.
p This menu is not available when
“Mute Timing” is “Off”.
1 Display the “Volume/Position Adjust-
ment” screen.
= For details, refer to Displaying the adjust-
ment and correction screen on page 135.
2 Touch [Volume/Mute Settings].
The “Volume/Mute Settings” screen appears.
3 Touch [Mute].
4 Touch the item you want to configure.
! –20dB:
The volume becomes 1/10.
! –10dB:
The volume becomes 1/3.
! Mute:
The volume becomes 0.
Setting the Volume for
Guidance and Phone
The sound volume for the navigation can be
set. You can separately set the volume of the
route guidance and the beep sound.
1 Display the “Volume/Position Adjust-
ment” screen.
= For details, refer to Displaying the adjust-
ment and correction screen on page 135.
2 Touch [Volume/Mute Settings].
The “Volume/Mute Settings” screen appears.
3 Touch [Volume].
The “Volume Settings” screen appears.
4 Touch [+] or [–] to set their volume.
On this screen, you can operate the following
items.
! Guidance
This setting controls the guidance volume
of navigation.
! Voice
This setting controls the incoming voice vo-
lume.
! Ringtone
This setting controls the incoming ring tone
volume.
p “Ringtone” and “Voice” adjustments are
needed only when a cellular phone featur-
ing Bluetooth technology is connected.
# If you touch the key next to “Beep”, the setting
is changed.
! On (default):
A beep sounds.
! Off:
The beep sound is muted.
Correcting the current location
Touch the screen to adjust the current position
and direction of the vehicle displayed on the
map.
1 Display the “Volume/Position Adjust-
ment” screen.
= For details, refer to Displaying the adjust-
ment and correction screen on page 135.
2 Touch [Modify Current Location].
3 Scroll to the position where you want
to set, then touch [OK].
4 Touch the arrow key on the screen to
set the direction, then touch [OK].
En
136
Chapter
27
Customizing preferences