Owner's Manual

Setting the route calculation by
learning route
The system learns the travel history of your ve-
hicle for each road.
This setting controls whether or not the travel
history should be taken into account.
1 Display the “Navi Settings” screen.
= For details, refer to Displaying the screen for
navigation function settings on page 137.
2 Touch [Guide].
3 Touch [Learning Route].
The setting screen appears.
4 Touch the item you want to set.
! On (default):
Calculates a route with the travel history
taken into account.
! Off:
Calculates a route without the travel history
taken into account.
Setting the route calculation
allowing for traffic congestion
p This function is available on AVIC-Z150BH
and AVIC-X950BH.
This navigation system can calculate a route
taking into account traffic congestion when it
acquires traffic information.
1 Display the “Navi Settings” screen.
= For details, refer to Displaying the screen for
navigation function settings on page 137.
2 Touch [Guide].
3 Touch [Traffic Avoidance].
The setting screen appears.
4 Touch the item you want to set.
! On (default):
Calculates a route allowing for traffic con-
gestion.
! Off:
Calculates a route without allowing for traf-
fic information.
Setting the route calculation
allowing for time restrictions
This setting controls whether streets or
bridges that have traffic restrictions during a
certain time should be taken into account.
CAUTION
If the time difference is not set correctly, the navi-
gation system cannot consider traffic regulations
correctly. Set the time difference correctly.
= For details, refer to Setting the time difference
on page 145.
1 Display the “Navi Settings” screen.
= For details, refer to Displaying the screen for
navigation function settings on page 137.
2 Touch [Guide].
3 Touch [Time restrictions].
The setting screen appears.
4 Touch the item you want to set.
! On (default):
Calculates a route while avoiding streets or
bridges with traffic restrictions during a cer-
tain time.
! Off:
Calculates a route while ignoring traffic re-
strictions.
p If you want to set your route to avoid raised
draw bridges, select “On”.
p The system may calculate a route that in-
cludes streets or bridges that are subject to
traffic restrictions during a certain time
even if “On” is selected.
Setting the use of freeways
You can predefine the use of freeways when
calculating a route.
1 Display the “Navi Settings” screen.
= For details, refer to Displaying the screen for
navigation function settings on page 137.
2 Touch [Guide].
En
141
Chapter
27
Customizing preferences
Customizing preferences