Owner's Manual
Table Of Contents
- Quick Start Guide
- Operation Manual (Supplied on CD-ROM Only)
- Restore Default Settings
- Demo Mode
- Using This Manual
- Removing Faceplate
- Attaching Faceplate
- Table of Contents
- Parts & Controls
- Operation
- Basic Operation
- Parts & Controls
- Adjusting the LCD Panel Angle
- Inserting and Ejecting a Disc
- Inserting and Ejecting an SD Memory Card
- Plugging and Unplugging a USB Device
- Connecting and Disconnecting an iPod
- Startup and Termination
- First-Time Startup
- Regular Startup
- Using the Navigation Menu Screens
- Shortcut Menu
- Using the Touch Panel
- Swipe Action
- Using the Map
- Searching for and Selecting a Location
- After the Location is Decided
- Checking and Modifying the Current Route
- Editing the Data On the Use of Navigation Function
- Using Traffic Information
- Registering and Connecting a Bluetooth Device
- Using Hands-Free Phoning
- Basic Operations of the AV Source
- Using the Radio
- HD Radio
- Playing Audio CDs
- Playing Music Files on ROM
- Playing a DVD-Video
- Playing a DivX Video
- DVD-Video or DivX Setup
- Playing Music Files (from USB or SD)
- Playing Video Files (from USB or SD)
- Using an iPod
- Using Pandora
- Using Aha Radio
- Using the Bluetooth Audio Player
- Using the SiriusXM Tuner
- Using AV Input
- Using AppRadio Mode
- Customizing Preferences
- Setting the Anti-Theft Function
- Returning the Navigation System to the Default or Factory Settings
- Basic Operation
- Troubleshooting
- Messages
- Additional Information
- Glossary
- Specs
- Installation Manual
- Important Information for the User
- Scan of CD-ROM
- iPhone 5 / iPod 5th Gen Lightning Adaptor Note
- Warranty
5 Touch the frequency for which you
want to adjust the level.
6 Touch [a]or[b] to adjust the level of
the equalizer band.
Each time you touch [a]or[b], the level of
the equalizer band increases or decreases.
Using the auto-adjusted equalizer
You can set the auto-adjusted equalizer to suit
the vehicle’s acoustics. To use this function,
the vehicle’s acoustics must be measured in
advance.
= For details of the operations, refer to Adjust-
ing the equalizer curve automatically (Auto
EQ) on page 154.
p To manually adjust the equalizer curve, set
“Auto EQ” to “Off”.
1 Display the “AV Sound Settings”
screen.
= For details, refer to Displaying the screen for
AV sound settings on page 150.
2 Touch [EQ Menu].
3 Touch the key next to “Auto EQ” to
turn the auto-adjusted equalizer on or off.
4 Select the equalizer curve.
Adjusting source levels
SLA (source level adjustment) lets you adjust
the volume level of each source to prevent ra-
dical changes in volume when switching be-
tween sources.
p Settings are based on the FM tuner volume
level, which remains unchanged.
p You cannot select [SLA] when the FM tuner
is selected as the AV source.
1 Compare the FM tuner volume level
with the level of the source you wish to ad-
just.
2 Display the “AV Sound Settings”
screen.
= For details, refer to Displaying the screen for
AV sound settings on page 150.
3 Touch [SLA].
4 Touch [+] or [–] to adjust the source vo-
lume.
“+8dB” to “–8dB” is displayed as the source
volume is increased or decreased.
The following AV sources are set to the same
source level adjustment volume automatically.
! AV1 and AV2
! CD, ROM, and DivX
! SD and USB
! Bluetooth Audio, Pandora (Bluetooth con-
nection) and Aha Radio (Bluetooth con-
nection)
! Pandora (HDMI connection) and Aha
Radio (HDMI connection) (for AVIC-
Z150BH and AVIC-X950BH)
! iPod, Pandora (iPhone) and Aha Radio
(iPhone)
Using the high pass filter
When you cut lower sounds from the subwoo-
fer output frequency, activate HPF (high pass
filter). Only frequencies higher than those in
the selected range are output from the front or
rear speakers.
1 Display the “AV Sound Settings”
screen.
= For details, refer to Displaying the screen for
AV sound settings on page 150.
2 Touch [HPF].
3 Touch [On].
# If you touch [Off], the setting is turned off.
En
153
Chapter
27
Customizing preferences
Customizing preferences