Owner's Manual
Table Of Contents
- Quick Start Guide
- Operation Manual (Supplied on CD-ROM Only)
- Restore Default Settings
- Demo Mode
- Using This Manual
- Removing Faceplate
- Attaching Faceplate
- Table of Contents
- Parts & Controls
- Operation
- Basic Operation
- Parts & Controls
- Adjusting the LCD Panel Angle
- Inserting and Ejecting a Disc
- Inserting and Ejecting an SD Memory Card
- Plugging and Unplugging a USB Device
- Connecting and Disconnecting an iPod
- Startup and Termination
- First-Time Startup
- Regular Startup
- Using the Navigation Menu Screens
- Shortcut Menu
- Using the Touch Panel
- Swipe Action
- Using the Map
- Searching for and Selecting a Location
- After the Location is Decided
- Checking and Modifying the Current Route
- Editing the Data On the Use of Navigation Function
- Using Traffic Information
- Registering and Connecting a Bluetooth Device
- Using Hands-Free Phoning
- Basic Operations of the AV Source
- Using the Radio
- HD Radio
- Playing Audio CDs
- Playing Music Files on ROM
- Playing a DVD-Video
- Playing a DivX Video
- DVD-Video or DivX Setup
- Playing Music Files (from USB or SD)
- Playing Video Files (from USB or SD)
- Using an iPod
- Using Pandora
- Using Aha Radio
- Using the Bluetooth Audio Player
- Using the SiriusXM Tuner
- Using AV Input
- Using AppRadio Mode
- Customizing Preferences
- Setting the Anti-Theft Function
- Returning the Navigation System to the Default or Factory Settings
- Basic Operation
- Troubleshooting
- Messages
- Additional Information
- Glossary
- Specs
- Installation Manual
- Important Information for the User
- Scan of CD-ROM
- iPhone 5 / iPod 5th Gen Lightning Adaptor Note
- Warranty
Do not press the h button to open or close
the panel when you are using the micro-
phone.
1 Stop the vehicle in a quiet place, close
all the doors, windows and sun roof, and
then turn the engine off.
If the engine is left running, engine noise may
prevent correct Auto EQ.
p If driving restrictions are detected during
measurement, measurement is canceled.
2 Fix the microphone for acoustical mea-
surement (sold separately) in the center of
the headrest of the driver’s seat, facing for-
ward.
The Auto EQ may differ depending on where
you place the microphone. If desired, place
the microphone on the front passenger seat
and perform Auto EQ.
3 Disconnect the iPhone or smartphone
device.
4 Turn on the ignition switch (ACC ON).
If the vehicle’s air condi tioner or heater is
turned on, turn it off. Noise from the fan in the
air conditioner or heater may prevent correct
Auto EQ.
5 Switch the AV source to “Off”.
= For details of the operations, refer to Dis-
playing the AV operation screen on page 71.
6 Set the video setting for the rear dis-
play to “Mirror AV”.
= For details of the operations, refer to Select-
ing the video for rear display on page 159.
7 Press the HOME button to display the
“Top Menu” screen.
8 Touch
.
The “Edit/Settings” screen appears.
9 Touch [AV Settings].
The “AV Settings” menu appears.
10 Touch [Auto EQ Measurement].
The “Auto EQ Measurement” screen ap-
pears.
11 Plug the microphone into the mini-jack
connector.
Mini-jack of the RCA connector
Microphone for acoustical measurement (sold separately)
12 Touch [Start].
A 10-second countdown starts.
13 Exit the vehicle and keep the door
closed until the countdown finishes.
When the countdown is over, a measurement
tone (noise) is emitted from the speakers and
the Auto EQ measurement begins.
14 Wait until the measurement is com-
pleted.
When Auto EQ is completed, a message is dis-
played indicating that the measurement is
completed.
p If the vehicle’s acoustics cannot be mea-
sured correctly, an error message will be
displayed.
p The measurement time varies depending
on the type of vehicle.
p To stop the measurement, touch [Stop].
En
156
Chapter
27
Customizing preferences