Owner's Manual
Table Of Contents
- Quick Start Guide
- Operation Manual (Supplied on CD-ROM Only)
- Restore Default Settings
- Demo Mode
- Using This Manual
- Removing Faceplate
- Attaching Faceplate
- Table of Contents
- Parts & Controls
- Operation
- Basic Operation
- Parts & Controls
- Adjusting the LCD Panel Angle
- Inserting and Ejecting a Disc
- Inserting and Ejecting an SD Memory Card
- Plugging and Unplugging a USB Device
- Connecting and Disconnecting an iPod
- Startup and Termination
- First-Time Startup
- Regular Startup
- Using the Navigation Menu Screens
- Shortcut Menu
- Using the Touch Panel
- Swipe Action
- Using the Map
- Searching for and Selecting a Location
- After the Location is Decided
- Checking and Modifying the Current Route
- Editing the Data On the Use of Navigation Function
- Using Traffic Information
- Registering and Connecting a Bluetooth Device
- Using Hands-Free Phoning
- Basic Operations of the AV Source
- Using the Radio
- HD Radio
- Playing Audio CDs
- Playing Music Files on ROM
- Playing a DVD-Video
- Playing a DivX Video
- DVD-Video or DivX Setup
- Playing Music Files (from USB or SD)
- Playing Video Files (from USB or SD)
- Using an iPod
- Using Pandora
- Using Aha Radio
- Using the Bluetooth Audio Player
- Using the SiriusXM Tuner
- Using AV Input
- Using AppRadio Mode
- Customizing Preferences
- Setting the Anti-Theft Function
- Returning the Navigation System to the Default or Factory Settings
- Basic Operation
- Troubleshooting
- Messages
- Additional Information
- Glossary
- Specs
- Installation Manual
- Important Information for the User
- Scan of CD-ROM
- iPhone 5 / iPod 5th Gen Lightning Adaptor Note
- Warranty
4 Touch the desired language.
After the language is selected, the previous
screen returns.
Setting the rear output
The navigation system’s rear output can be
used for a full-range speaker or subwoofer
connection. If you switch “Rear SP” to
“Sub. W”, you can connect a rear speaker lead
directly to a subwoofer without using an auxili-
ary amp.
Initially, the navigation system is set for a rear
full-range speaker connection (“Full”).
p Both rear speaker leads output and RCA
rear output are switched simultaneously in
this setting. (When you use the product
without RCA rear output, this setting only
applies to the rear speaker leads.)
p “Rear SP” can be set only when the source
is selected to “Off”.
1 Disconnect the iPhone or smartphone
device.
2 Press the HOME button to display the
“Top Menu” screen.
3 Touch
.
The “Edit/Settings” screen appears.
4 Touch [AV Settings].
The “AV Settings” menu appears.
5 Touch [Rear SP].
6 Touch [Full] or [Sub. W].
! Full (default):
When no subwoofer is connected to the
rear output, select “Full”.
! Sub. W
When a subwoofer is connected to the rear
output, select “Sub. W”.
Adjusting the picture
CAUTION
For safety reasons, you cannot use some of these
navigation functions while your vehicle is in mo-
tion. To enable these functions, you must stop in
a safe place and apply the parking brake. Refer to
Important Information for the User (a separate
manual).
You can adjust the picture for each source and
rear view camera.
1 Press and hold the MODE button.
The “Picture Adjustment” screen appears.
2 Touch the right and left touch panel
keys to make an adjustment.
! Brightness:
Adjusts the black intensity.
! Contrast:
Adjusts the contrast.
! Dimmer:
Adjusts the brightness of display.
! Color Temp.:
Adjusts the tone of color (which color is em-
phasized, red or blue).
! Color:
Adjusts the color saturation.
! Hue:
Adjusts the tone of color (which color is em-
phasized, red or green).
p Touching [Standby] while adjusting the
rear view camera image clears the screen
temporarily.
= For details, refer to Temporarily clearing
the screen (navigation system in standby
mode) on page 20.
En
158
Chapter
27
Customizing preferences