Owner's Manual

Messages for Bluetooth functions
When problems occur with Bluetooth functions, an error message appears on the display. Refer
to the table below to identify the problem, then take the suggested corrective action. If the error
persists, record the error message and contact your dealer or your nearest Pioneer service center.
Message Cause Action (Reference)
Currently unable to register. The Bluetooth device that you want
to register is under communication
such as transferring phone book.
After finishing the communication, register
the Bluetooth device again.
Unable to connect the device.
Try again later.
This navigation system is trying to
connect to the Bluetooth device
while performing the following op-
erations with another device.
! Registering the Bluetooth device
! Setting to connect the Bluetooth
device
! Transferring the phone book
After the operation of another dev ice is com-
plete, reconnect the Bluetooth device.
Unable to register the
Bluetooth device.
An error has occurred. Set the “Bluetooth On/Off” to “Off”, and
then set to “On”. Subsequently, operate to
register again.
Could not find any available
phone.
No available phone is in the sur-
rounding area when the system
searches for connectable cellular
phones featuring Bluetooth wireless
technology.
! Activate the target phone’s Bluetooth wire-
less technology.
! Check whether your cellular phone is acti-
vated and, whether the distance to your cellu-
lar phone is too far.
Unable to search for available
devices.
This navigation system is trying to
search for available device while
per forming following operations.
! Registering the Bluetooth device
! Setting to connect the Bluetooth
device
! Transferring the phone book
! Deleting the registered Bluetooth
device
After finishing the operation, search for avail-
able devices again.
Device search failed. An error has occurred. Set the “Bluetooth On/Off” to “Off”, and
then set to “On”. Subsequently, search for
available devices again.
Unable to change the device
name.
An error has occurred. Set the “Bluetooth On/Off” to “Off”, and
then set to “On”. Subsequently, operate to
change the device name again.
Currently unable to delete. This navigation system is trying to
delete the registered Bluetooth de-
vice while performing the following
operations.
! Using the hands-free phoning
! Registering Bluetooth device
! Setting to connect the Bluetooth
device
! Transferring the phone book
After finishing the operation, delete the
Bluetooth device again.
Delete failed An error has occurred. Set the “Bluetooth On/Off” to “Off”, and
then set to “On”. Subsequently, operate to de-
lete the Bluetooth device again.
En
175
Appendix
Appendix
Appendix