Owner's Manual
Table Of Contents
- Quick Start Guide
- Operation Manual (Supplied on CD-ROM Only)
- Restore Default Settings
- Demo Mode
- Using This Manual
- Removing Faceplate
- Attaching Faceplate
- Table of Contents
- Parts & Controls
- Operation
- Basic Operation
- Parts & Controls
- Adjusting the LCD Panel Angle
- Inserting and Ejecting a Disc
- Inserting and Ejecting an SD Memory Card
- Plugging and Unplugging a USB Device
- Connecting and Disconnecting an iPod
- Startup and Termination
- First-Time Startup
- Regular Startup
- Using the Navigation Menu Screens
- Shortcut Menu
- Using the Touch Panel
- Swipe Action
- Using the Map
- Searching for and Selecting a Location
- After the Location is Decided
- Checking and Modifying the Current Route
- Editing the Data On the Use of Navigation Function
- Using Traffic Information
- Registering and Connecting a Bluetooth Device
- Using Hands-Free Phoning
- Basic Operations of the AV Source
- Using the Radio
- HD Radio
- Playing Audio CDs
- Playing Music Files on ROM
- Playing a DVD-Video
- Playing a DivX Video
- DVD-Video or DivX Setup
- Playing Music Files (from USB or SD)
- Playing Video Files (from USB or SD)
- Using an iPod
- Using Pandora
- Using Aha Radio
- Using the Bluetooth Audio Player
- Using the SiriusXM Tuner
- Using AV Input
- Using AppRadio Mode
- Customizing Preferences
- Setting the Anti-Theft Function
- Returning the Navigation System to the Default or Factory Settings
- Basic Operation
- Troubleshooting
- Messages
- Additional Information
- Glossary
- Specs
- Installation Manual
- Important Information for the User
- Scan of CD-ROM
- iPhone 5 / iPod 5th Gen Lightning Adaptor Note
- Warranty
4 Read the terms carefully, checking the
details, and then touch [OK] if you agree to
the conditions.
The map screen appears.
Regular startup
% Start the engine to boot up the system.
After a short pause, the splash screen comes
on for a few seconds.
p The screen shown will differ depending on
the previous conditions.
p If the anti-theft function is activated, you
must enter your password.
p The terms appear if the previous condition
was the navigation screen.
Read the terms carefully, checking the de-
tails, and then touch [OK] if you agree to
the conditions.
After you touch [OK], the screen that was
displayed just before turning off the ignition
switch (ACC OFF) is displayed.
A message about the map
database
After you start using this navigation system, a
message related to map data may be dis-
played.
p This message is displayed the first time you
turn on the navigation system each month.
p Touch the message to close it or it will dis-
appear automatically after eight sec-
onds.
Demonstration images
If you do not operate this navigation system
for five minutes, demonstration images are
displayed.
p The demonstration images will not be dis-
played if you drive after mounting this navi-
gation system.
Temporarily clearing the
screen (navigation system
in standby mode)
You can temporarily clear the screen at night
or when the screen is too bright.
% Press and hold the MAP button.
The screen is cleared temporarily.
p If you touch the screen when the navigation
system is in standby mode, it reverts to the
original screen.
Also, if you press the MAP button, the
standby mode is canceled and the current
location screen is displayed. If you press
the MODE button, the standby mode is
canceled and the AV source screen is dis-
played.
p When the navigation system is in standby
mode, the navigation guidance does not
output the voice guidance. The audio sound
is output.
p The standby mode is not canceled by turn-
ing ignition switch on or off.
En
20
Chapter
02
Basic operation