Owner's Manual

Displaying the route overview
p The route overview is only active when the
route is set.
1 Display the editing route screen.
= For details of the operations, refer to How to
use the navigation menu screens on page
22.
1234
5
1 Profile
You can confirm the set route.
= For details, refer to Checking the current
itinerary on page 45.
2 Options
You can add a waypoint along the route and
set the route which passes through it. You
can also change search criteria.
= For details, refer to Modifying the route
calculation conditions on page 46.
= For details, refer to Editing waypoints on
page 47.
3 Skip Wpt.
If you no longer need to stop by the regis-
tered waypoint, you can search a route
again by supposing that you have already
passed the waypoint.
= For details, refer to Skipping a waypoint
on page 48.
4 Demo ON
You can confirm the route from the demon-
stration of the driving of the route from the
starting point and final destination.
= For details, refer to Using the demonstra-
tion guidance on page 48.
Demo OFF
While the demonstration guidance is run-
ning, [Demo OFF] appears. Touching the
key finishes the demonstration guidance.
5 Cancel Route
You can delete the current route.
= For details, refer to Canceling the route
guidance on page 49.
2 Touch the item that you want to re-
fine.
Checking the current itinerary
You can check the route details.
1 Display the editing route screen.
= For details of the operations, refer to How to
use the navigation menu screens on page
22.
2 Touch [Profile].
The “Route Profile” screen appears.
12
3
1 Current position
2 Guidance point
3
The screen is closed.
p When you display the “Route Profile”
screen by touching [Profile] on the
Route confirmation screen, [OK] ap-
pears.
Touching this key starts the route gui-
dance on the displayed route.
En
45
Chapter
06
Checking and modifying the current route
Checking and modifying the current route