Owner's Manual
Table Of Contents
- Quick Start Guide
- Operation Manual (Supplied on CD-ROM Only)
- Restore Default Settings
- Demo Mode
- Using This Manual
- Removing Faceplate
- Attaching Faceplate
- Table of Contents
- Parts & Controls
- Operation
- Basic Operation
- Parts & Controls
- Adjusting the LCD Panel Angle
- Inserting and Ejecting a Disc
- Inserting and Ejecting an SD Memory Card
- Plugging and Unplugging a USB Device
- Connecting and Disconnecting an iPod
- Startup and Termination
- First-Time Startup
- Regular Startup
- Using the Navigation Menu Screens
- Shortcut Menu
- Using the Touch Panel
- Swipe Action
- Using the Map
- Searching for and Selecting a Location
- After the Location is Decided
- Checking and Modifying the Current Route
- Editing the Data On the Use of Navigation Function
- Using Traffic Information
- Registering and Connecting a Bluetooth Device
- Using Hands-Free Phoning
- Basic Operations of the AV Source
- Using the Radio
- HD Radio
- Playing Audio CDs
- Playing Music Files on ROM
- Playing a DVD-Video
- Playing a DivX Video
- DVD-Video or DivX Setup
- Playing Music Files (from USB or SD)
- Playing Video Files (from USB or SD)
- Using an iPod
- Using Pandora
- Using Aha Radio
- Using the Bluetooth Audio Player
- Using the SiriusXM Tuner
- Using AV Input
- Using AppRadio Mode
- Customizing Preferences
- Setting the Anti-Theft Function
- Returning the Navigation System to the Default or Factory Settings
- Basic Operation
- Troubleshooting
- Messages
- Additional Information
- Glossary
- Specs
- Installation Manual
- Important Information for the User
- Scan of CD-ROM
- iPhone 5 / iPod 5th Gen Lightning Adaptor Note
- Warranty
2 Touch [Options], and then touch [Way-
points].
The “Waypoints List” screen appears.
3 Touch [Delete].
The “Delete” screen appears.
4 Select the waypoint that you want to
delete.
A check mark appears next to the selected
waypoint.
5 Touch [Delete].
A message confirming whether to delete the
waypoint appears.
6 Touch [Yes].
The selected waypoint will be deleted from the
list.
7 Touch [OK] on the “Waypoints List”
screen.
The route is recalculated, and the Route con-
firmation screen appears.
8 Touch [OK].
A map of the current position appears.
Sorting waypoints
You can sort waypoints and recalculate the
route.
p You cannot sort waypoints that you have al-
ready passed.
1 Display the editing route screen.
= For details of the operations, refer to How to
use the navigation menu screens on page
22.
2 Touch [Options], and then touch [Way-
points].
The “Waypoints List” screen appears.
3 Touch [Sort], and then touch [Manual].
You can specify the order of waypoints to sort.
# If you touch [Automatic], the waypoints are
sorted in the order of the nearest one from the
current location.
4 Touch the waypoint or destination.
Put them in the desired order.
5 Touch [OK].
The “Waypoints List” screen appears.
6 Touch [OK] on the “Waypoints List”
screen.
The route is recalculated, and the Route con-
firmation screen appears.
7 Touch [OK].
A map of the current position appears.
Skipping a waypoint
1 Display the editing route screen.
= For details of the operations, refer to How to
use the navigation menu screens on page
22.
2 Touch [Skip Wpt.].
The next waypoint is considered to have al-
ready been passed through, and a route is
searched.
Using the demonstration
guidance
You can confirm the route by making the navi-
gation system run to the destination from the
point of departure on screen.
p The demonstration is repeated, but finishes
in the following cases:
! When starting actual driving
! When searching a route
! When deleting route
! When is touched [Demo OFF].
En
48
Chapter
06
Checking and modifying the current route