Owner's Manual

Black plate (132,1)
Changing the wide screen
mode
You can set the screen size of video.
p The default setting is “Full”.
1 Touch
on the “AV1” or “AV2”
screen.
p The appearance of this key changes accord-
ing to the current setting.
2 Touch the desired mode.
! Full
A 4:3 picture is enlarged in the horizontal
direction only, enabling you to enjoy a 4:3
TV picture (normal picture) without any
omissions.
! Just
The picture is enlarged slightly at the center
and the amount of enlargement increases
horizontally toward the ends of the picture,
enabling you to enjoy a 4:3 picture without
sensing any disparity, even on a wide
screen.
! Cinema
A picture is enlarged by the same propor-
tion as “Full” or “Zoom” in the horizontal di-
rection and by an intermediate proportion
between “Full” and “Zoom” in the vertical
direction; ideal for a cinema-sized (wide
screen) picture where captions lie outside
the frame.
! Zoom
A 4:3 picture is enlarged in the same pro-
portion both vertically and horizontally;
ideal for a cinema-sized (wide screen) pic-
ture.
! Normal
A 4:3 picture is displayed normally, giving
you no sense of disparity since its propor-
tions are the same as those of the normal
picture.
p Images may be unclear when “Cinema” or
“Zoom” is selected.
p Remember that use of this system for com-
mercial or public viewing purposes may
constitute an infringement on the author’s
rights protected by the Copyright Law.
<CRB4224-A>132
En
132
Chapter
25
Using AV input