Owner's Manual

Black plate (145,1)
Switching the road on
which you are driving
When you are driving in the area where an or-
dinary road and toll road run parallel, and if
the system calculates your vehicle position to
be on a road opposite from the one on which
you are actually driving, you can switch your
vehicle position to the right road, i.e. either the
ordinary road or the toll road.
1 Display the “Volume/Position Adjust-
ment” screen.
= For details, refer to Displaying the adjust-
ment and correction screen on page 143.
2 Touch [Find Alternative Location].
The vehicle position is corrected to the right
type of road.
p The vehicle position may not be corrected
in some cases.
p During the route guidance, the vehicle posi-
tion is corrected before the route is
searched again.
Displaying the screen for
navigation function settings
1 Press the HOME button to display the
“Top Menu” screen.
2 Touch
.
The “Edit/Settings” menu appears.
3 Touch [Navi Settings].
The “Navi Settings” menu appears.
4 Touch the item you want to configure.
5 Touch to end the setup.
Changing the road color
You can set the road color to bluish or reddish.
1 Display the “Navi Settings” screen.
= For details, refer to Displaying the screen for
navigation function settings on page 145.
2 Touch [Map Display].
3 Touch [Road Color].
The setting screen appears.
4 Touch the item you want to set.
! Blue (default):
Changes to blue based road colors.
! Red:
Changes to red based road colors.
Setting the scroll-Locked 2D
(Normal) View
You can select whether to lock the normal
view when you scroll the screen.
1 Display the “Navi Settings” screen.
= For details, refer to Displaying the screen for
navigation function settings on page 145.
2 Touch [Map Display].
3 Touch [2D-Locked Scroll].
The setting screen appears.
4 Touch the item you want to set.
! Off (default):
Does not lock the normal view when you
scroll the screen.
<CRB4224-A>145
En
145
Chapter
27
Customizing preferences
Customizing preferences