Owner's Manual

Black plate (162,1)
3 Touch [SLA].
4 Touch [+] or [–] to adjust the source vo-
lume.
“+8dB” to “–8dB” is displayed as the source
volume is increased or decreased.
The following AV sources are set to the same
source level adjustment volume automatically.
! AV1 and AV2
! CD, ROM, and DivX
! SD and USB
! Bluetooth Audio, Pandora (Bluetooth con-
nection), Aha Radio (Bluetooth connec-
tion) and AppRadio Mode (Android
(Bluetooth connection))
! Pandora (HDMI connection), Aha Radio
(HDMI connection) and AppRadio Mode
(HDMI connection) (for AVIC-Z150BH and
AVIC-X950BH)
! iPod, Pandora (iPhone), Aha Radio
(iPhone) and AppRadio Mode (iPhone)
Using the high pass filter
When you cut lower sounds from the subwoo-
fer output frequency, activate HPF (high pass
filter). Only frequencies higher than those in
the selected range are output from the front or
rear speakers.
1 Display the “AV Sound Settings”
screen.
= For details, refer to Displaying the screen for
AV sound settings on page 158.
2 Touch [HPF].
3 Touch [On].
# If you touch [Off], the setting is turned off.
4 Each touch of or changes the
cut-off frequencies as follows:
50Hz — 63Hz — 80Hz — 100Hz — 125Hz
Using the subwoofer output
The navigation system is equipped with a sub-
woofer output mechanism, which can be
turned on or off.
1 Display the “AV Sound Settings”
screen.
= For details, refer to Displaying the screen for
AV sound settings on page 158.
2 Touch [Sub Woofer].
3 Confirm that the subwoofer output is
turned on.
p The default setting is “On”.
# If you touch [Off], the subwoofer output is
turned off.
4 Touch [Reverse] or [Normal] to select
the phase of subwoofer output.
5 Touch
or next to
“Frequency(Hz)” to select cut-off fre-
quency.
Each time you touch
or , cut-off fre-
quencies are selected in the following order:
50Hz — 63Hz — 80Hz — 100Hz — 125Hz
Only frequencies lower than those in the se-
lected range are output from the subwoofer.
6 Touch [+] or [–] next to “Level” to adjust
the output level.
“+6” to “–24” is displayed as the level is in-
creased or decreased.
Enhancing bass (Bass Booster)
You can enhance bass sounds that are often
muted by driving noise.
<CRB4224-A>162
En
162
Chapter
27
Customizing preferences