Owner's Manual

Black plate (172,1)
Setting the anti-theft function
You can set a password for the navigation sys-
tem. If the back-up lead is cut after the pass-
word is set, the navigation system prompts for
the password at the time of next boot up.
Setting the password
1 Display the “System Settings” screen.
= For details, refer to Displaying the screen for
system settings on page 152.
2 Touch Area1, followed by Area2, and
then touch and hold Area3.
Area1 Area2 Area3
3 Touch [Set Password].
The password setting screen appears.
4 Enter the password you want to set.
p 5 to 16 characters can be entered for a
password.
5 Touch [OK].
6 Enter a password hint.
p Up to 40 characters can be entered for a
hint.
7 Touch [OK].
The “Password Confirmation” screen ap-
pears.
p If you want to change the password cur-
rently set, enter the current password and
then enter the new one.
8 Check the password, and then touch
.
Entering the password
On the password input screen, you must enter
the current password.
1 Enter the password.
2 Touch [OK].
If you enter the correct password, the naviga-
tion system will be unlocked.
Deleting the password
The current password can be deleted.
1 Display the “System Settings” screen.
= For details, refer to Displaying the screen for
system settings on page 152.
2 Touch Area1, followed by Area2, and
then touch and hold Area3.
3 Touch [Clear password].
A message confirming whether to delete the
password appears.
4 Touch [Yes].
The password setting screen appears.
A message confirming a password hint ap-
pears.
5 Touch [OK].
6 Enter the current password.
7 Touch [OK].
Forgotten password
Contact the nearest authorized Pioneer Ser-
vice Station.
<CRB4224-A>172
En
172
Chapter
28
Other functio ns