Owner's Manual

Black plate (18,1)
Ejecting an SD memory card
(for AVIC-X950BH, AVIC-X850BT
and AVIC-X8510BT)
1 Press the middle of the SD memory
card gently until it clicks.
2 Pull the SD memory card out straight.
Connecting and
disconnecting an iPod
CAUTION
! To prevent data loss and damage to the sto-
rage device, never remove it from this naviga-
tion system while data is being transferred.
! Pioneer cannot guarantee compatibility with
all USB mass storage devices and assumes
no responsibility for any loss of data on media
players, iPhone, smartphone, or other devices
while using this product.
Connecting your iPod
For iPod with 30-pin connector users
Using a USB interface cable for iPod / iPhone
(CD-IU201N) (sold separately), you can con-
nect your iPod to the navigation system.
p For details about iPod compatibility with
this navigation system, refer to the informa-
tion on our website.
p Connection via a USB hub is not possible.
For iPod with Lightning connector
users who use a USB interface cable for
iPod / iPhone
You can connect your iPod with this navigation
system by using a USB interface cable for
iPod / iPhone (CD-IU201N) (sold separately)
and a Lightning to 30-pin Adapter (Apple Inc.
products) (sold separately).
However, functions related to iPod video files
are not available.
For iPod with Lightning connector
users who use an HDMI/USB interface
cable for iPod / iPhone (for AVIC-
Z150BH and AVIC-X950BH)
To play music and/or video files on your iPod
with this navigation system, connect the fol-
lowing cables, and launch CarMediaPlayer
while in AppRadio Mode.
! HDMI/USB interface cable for iPod /
iPhone (CD-IH202) (sold separately)
! Lightning Digital AV Adapter (Apple Inc.
products) (sold separately)
! Lightning to USB cable (supplied with
iPhone with Lightning connector)
= For details of AppRadio Mode, refer to
Chapter 26.
= Refer to the CarMediaPlayer manual for
more information.
<CRB4224-A>18
En
18
Chapter
02
Basic operation