BCS-414 Blu-ray Disc surround system XV-BD212 Blu-ray Disc receiver S-BD707T Speaker System S-BD212SW Speaker System (only subwoofer) BCS-212 Blu-ray Disc surround system XV-BD212 Blu-ray Disc receiver S-BD310 Speaker System English França Deutsc Italiano Nederla Españ P/NO: MFL67205107 HB916-DH0_BGBRPPK_ENG.
1 2 Getting Started Getting Started Safety Information 1 CAUTION Getting Started RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Getting Started This device is equipped with a portable battery or accumulator. CAUTION: yy Do not use or store batteries in direct sunlight or other excessively hot place, such as inside a car or near a heater. This can cause batteries to leak, overheat, explode or catch fire. It can also reduce the life or performance of batteries. yy When disposing of used batteries, please comply with governmental regulations or environmental public instruction's rules that apply in your country or area.
1 Getting Started Getting Started PIONEER hereby declares that this/ these product(s) is/are in compliance with the essential requirements and other relevant provisions of Directive 2004/108/EC, 2006/95/EC, and 2009/125/EC. WARNING: To prevent a fire hazard, do not place any naked flame sources (such as a lighted candle) on the equipment. WARNING: Before plugging in for the first time, read the following section carefully.
Getting Started 5 Important Notice for TV colour system The colour system of this player differs according to currently playing discs. Only the multi system colour TV can receive all signals output from the player. yy If you have a PAL colour system TV, you will see just distorted images when using discs or video contents recorded in NTSC. 1 Getting Started For example, when the player plays the disc recorded in the NTSC colour system, the image is output as an NTSC signal.
Table of Contents Table of Contents 1 Getting Started 2 8 8 12 13 13 13 14 15 15 Safety Information Introduction – Playable Discs and symbols used in this manual – About the “7” Symbol Display – Supplied Accessories – Accessaries of speaker box (S-BD707T) – Accessaries of speaker box (S-BD212SW) – Accessaries of speaker box (S-BD310) – File compatibility – AVCHD (Advanced Video Codec High Definition) – About DLNA – Certain System Requirements – Regional Code – Compatibility Notes Remote control Fron
Table of Contents 47 47 48 48 48 48 49 49 49 50 51 51 51 51 51 51 52 On-Screen display – Displaying content information onscreen – Playing from selected time – Hearing a different audio – Selecting a subtitle language – Watching from a different angle – Changing the TV Aspect Ratio – Changing subtitle code page – Changing the Picture Mode Audio CD Recording Radio Operations – Presetting the Radio Stations – Deleting a saved station – Deleting all the saved stations – Improving poor FM reception – See infor
Getting Started Introduction 1 Playable Discs and symbols used in this manual Getting Started Media/Term Logo Symbol e yy Discs such as movies that can be purchased or rented. yy “Blu-ray 3D” discs yy BD-R/RE discs that are recorded in BDAV format. Blu-ray y, u, i r DVD-ROM yy BD-R/RE discs that contain Movie, Music or Photo files. yy ISO 9660+JOLIET, UDF and UDF Bridge format yy Discs such as movies that can be purchased or rented.
Getting Started ,,Note yy Depending on the recording software & the finalization, some recorded discs (CD-R/RW, DVD±R/RW, BD-R/RE) may not be playable. yy BD-R/RE, DVD±R/RW and CD-R/RW discs recorded using a personal computer or a DVD or CD Recorder may not play if the disc is damaged or dirty, or if there is dirt or condensation on the player’s lens.
Getting Started Supplied Accessories Accessaries of speaker box (S-BD212SW) 1 Getting Started Video cable (1) Remote control (1) Speaker cable (1) Battery (1) FM antenna (1) Large non-skid pads (1) Accessaries of speaker box (S-BD310) Accessaries of speaker box (S-BD707T) Colour-coded Speaker cables (6) Colour-coded Speaker cables (5) Small non-skid pads (1) Screws (12) Large non-skid pads (1) Speaker stand bases (4) Small non-skid pads (1) Middle non-skid pads (1) HB916-DH0_BGBRPPK_
Getting Started 11 File compatibility Movie files Disc, USB DLNA, PC File Extension Codec Format Audio Format 1 Subtitle “.avi”, “.divx”, “.mpg”, “.mpeg”, “.mkv”, “.mp4”, “.asf”, “.wmv”, “.m4v” (DRM free) DIVX3.xx, DIVX4.xx, DIVX5.xx, DIVX6.xx (Standard playback only), XVID, MPEG1 SS, H.264/MPEG-4 AVC, MPEG2 PS, MPEG2 TS, VC-1 SM (WMV3) Dolby Digital, DTS, MP3, WMA, AAC, AC3 SubRip (.srt / .txt), SAMI (.smi), SubStation Alpha (.ssa/.txt), MicroDVD (.sub/.txt), VobSub (.sub), SubViewer 1.0 (.
Getting Started ,,Note yy The file name is limited to 180 characters. 1 yy Maximum files/folder: Less than 2 000 (total number of files and folders) Getting Started yy Depending on the size and number of the files, it may take several minutes to read the contents on the media. yy File compatibility may differ depending on the server. yy The file requirements on page 11 are not always compatible. There may have some restrictions by file features and media server’s ability.
Getting Started 13 Compatibility Notes For high definition video playback: yy Because BD-ROM is a new format, certain disc, digital connection and other compatibility issues are possible. If you experience compatibility problems, please contact an authorized Customer Service Center. yy High definition display that has COMPONENT or HDMI input jacks. yy BD-ROM disc with high definition content.
Getting Started Remote control • • • • • • • • • a • • • • • • • • 1 Getting Started P INPUT/TUNER: Changes input mode. 1 1 (STANDBY/ON): Switches the player ON or OFF. B OPEN/CLOSE: Opens and closes the disc tray. HDMI IN: Changes input mode to HDMI IN directly. OPTICAL: Changes input mode to optical directly. 2 m DISPLAY: Displays or exits On-Screen Display. n HOME MENU: Displays or exits the [Home Menu]. MENU: Accesses the menu on a disc.
Getting Started 15 Front panel a STANDBY/ON OPEN/CLOSE FUNCTION 1 b TUNE PORTABLE IN 5V 500 mA c d e f g c Display Window a Disc Tray b Operation buttons a b 1 (STANDBY/ON) a Button Switches the player ON or OFF. B (OPEN/CLOSE) FUNCTION Changes the input source or function.
2 16 Connecting Connecting Assemble the speakers For center speaker: Use the supplied adhesive to attach four small pads to the base of center speaker. Speaker Setup for BCS-414 Preparing the speakers middle non-skid pads 2 1. Attach the non-skid pads to the base of each speaker stand bases, the subwoofer and the center speaker.
Connecting Large non-skid pads Large non-skid pads Rear 3. Connect the wires to the player. Connect the white wire with gray line into (+) side and the other wire into (–) side. To connect the cable to the player, press each plastic finger pad to open the connection terminal. Insert the wire and release the finger pad. 17 Rear Securing your front and surround speakers Secure each of the front and surround speakers using the plastic catch provided.
Connecting Speaker Setup for BCS-212 Preparing the speakers For center speaker: Use the supplied adhesive to attach four small pads to the base of center speaker. 1. Attach the non-skid pads to the base of each speaker. small non-skid pads For speakers: Use the supplied adhesive to attach four small pads to the basenon-skid (bottom) of each speaker.
Connecting 19 Wall mounting the Additional notes on Large non-skid pads center speaker speaker Rear The center speaker have a mounting hole which can be used to mount the speaker on the wall. Install the main front left and right speakers at an equal distance from the TV. Before mounting Precautions: Mounting screws are not supplied. Use screws suitable for the wall material and support the weight of the speaker.
B C A G 20 Connecting F A Positioning the system E A The following illustration shows an example of positioning the system. Note that the illustrations Ain these instructions differ from the actual unit for explanation purposes. For the best possible surround sound, all the speakers other than the subwoofer should be placed at the same distance from the listening position ( A ).
Connecting Connecting to Your TV Make one of the following connections, depending on the capabilities of your existing equipment. yy HDMI connection (page 21) yy Component Video connection (page 23) 21 HDMI Connection If you have a HDMI TV or monitor, you can connect it to this player using a HDMI cable (Type A, High Speed HDMI™ Cable with Ethernet). Connect the HDMI jack on the player to the HDMI jack on a HDMI compatible TV or monitor.
Connecting ,,Note yy If a connected HDMI device does not accept the audio output of the player, the HDMI device’s audio sound may be distorted or may not output. yy When you use HDMI connection, you can change the resolution for the HDMI output. (Refer to “Resolution Setting” on page 24.) 2 Connecting yy Select the type of video output from the HDMI OUT jack using [HDMI Color Setting] option on the [Setup] menu (see page 32).
Connecting 23 Component Video Connection Video Connection Connect the COMPONENT VIDEO OUT jacks on the player to the corresponding input jacks on the TV using component video cable. You can hear the sound the through the system’s speaker. Connect the VIDEO OUT jack on the player to the video in jack on the TV using a video cable. You can hear the sound through the system’s speakers.
Connecting Resolution Setting The player provides several output resolutions for HDMI OUT and COMPONENT VIDEO OUTPUT jacks. You can change the resolution using [Setup] menu. Antenna connection Connect the supplied antenna for listening to the radio. 1. Press HOME MENU (n). 2. Use A/D to select the [Setup] and press ENTER (b). The [Setup] menu appears. 2 3. Use W/S to select [DISPLAY] option then press D to move to the second level. Connecting 4.
Connecting 25 Connections with external device AUX Connection You can enjoy the sound from an external component through the speakers of this system. You can also use the FUNCTION button on the front panel to select the input mode. You can enjoy the sound from your portable audio player through the speakers of this system. Connect the headphones (or line out ) jack of the portable audio player into the PORTABLE IN socket of this unit.
Connecting 2 OPTICAL IN connection HDMI IN 1/2 connection You can enjoy the sound from your component with a digital optical connection through the speakers of this system. You can enjoy the pictures and sound from your component through this connection. Connect the optical output jack of your component into the OPTICAL IN jack on the unit. And then select the [OPTICAL] option by pressing INPUT/ TUNER and ENTER (b). Or press OPTICAL to select directly.
Connecting 27 Connecting to your Home Network This player can be connected to a local area network (LAN) via the LAN port on the rear panel. By connecting the unit to a broadband home network, you have access to services such as BDLIVE interactivity and Online content services. Broadband service 2 Using a wired network provides the best performance, because the attached devices connect directly to the network and are not subject to radio frequency interference.
Connecting Wired Network Setup If there is a DHCP server on the local area network (LAN) via wired connection, this player will automatically be allocated an IP address. After making the physical connection, a small number of home networks may require the player’s network setting to be adjusted. Adjust the [NETWORK] setting as follow. 2 Preparation Connecting Before setting the wired network, you need to connect the broadband internet to your home network. 5.
Connecting 29 Notes on Network Connection: yy Many network connection problems during set up can often be fixed by re-setting the router or modem. After connecting the player to the home network, quickly power off and/ or disconnect the power cable of the home network router or cable modem. Then power on and/or connect the power cable again.
Connecting USB device connection This player can play movie, music and photo files contained in the USB device. Playback content in the USB device 2 1. Insert a USB device to the USB port until it fits into place. Connecting VOLUME ,,Note yy This player supports USB flash drive/ external HDD formatted in FAT16, FAT32 and NTFS when accessing files (music, photo, movie). However, for BD-LIVE and Audio CD recording, only FAT16 and FAT32 formats are supported.
3 System Setting System Setting Settings 31 [DISPLAY] Menu TV Aspect Ratio Adjust the Setup Settings You can change the settings of the player in the [Setup] menu. 1. Press HOME MENU (n). Select a TV aspect ratio option according to your TV type. [4:3 Letter Box] Select when a standard 4:3 TV is connected. Displays theatrical images with masking bars above and below the picture. [4:3 Pan Scan] Select when a standard 4:3 TV is connected. Displays pictures cropped to fill your TV screen.
System Setting Resolution HDMI Color Setting Sets the output resolution of the Component and HDMI video signal. Refer to page 24 and 60 for details about the resolution setting. Select the type of output from the HDMI OUT jack. For this setting, please refer to the manuals of your display device. [Auto] [YCbCr] If the HDMI OUT jack is connected to TVs providing display information (EDID), automatically selects the resolution best suited to the connected TV.
System Setting 33 [LANGUAGE] Menu [AUDIO] Menu Display Menu Speaker Setup Select a language for the [Setup] menu and onscreen display. To obtain the best possible sound, use the speaker setup display to specify the volume of the speakers you have connected and their distance from your listening position. Use the test to adjust the volume of the speakers to the same level. Disc Menu/Disc Audio/ Disc Subtitle Select the language you prefer for the audio track (disc audio), subtitles, and the disc menu.
System Setting HD AV Sync [LOCK] Menu Sometimes Digital TV encounters a delay between picture and sound. If this happens you can compensate by setting a delay on the sound so that it effectively ‘waits’ for the picture to arrive: this is called HD AV Sync. Use W/S to scroll up and down through the delay amount, which you can set at anything between 0 and 300 ms. The [LOCK] settings affect only Blu-ray Disc and DVD playback.
System Setting 35 DVD Rating [NETWORK] Menu Blocks playback of rated DVD based on their content. (Not all discs are rated.) The [NETWORK] settings are needed to use the BDLive and Online content services. [Rating 1-8] Rating one (1) has the most restrictions and rating eight (8) is the least restrictive. [Unlock] If you select [Unlock], parental control is not active and the disc plays in full. Blu-ray Disc Rating Set an age limit of BD-ROM play.
System Setting [OTHERS] Menu ARC (Audio Return Channel) You can set ARC (Audio Return Channel) function [On] or [Off ]. The ARC function enables an HDMI capable TV to send the audio stream to HDMI OUT of this player. Refer to page 22 for details about this function. DivX® VOD 3 ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, Inc. This is an official DivX Certified® device that plays DivX video. Visit divx.
System Setting 37 Sound Effect You can select a suitable sound mode. Press SOUND repeatedly until the desired mode appears on the front panel display or the TV screen. The displayed items for the equalizer maybe different depending on sound sources and effects. [Mode 1]: Gives you suitable sound setting with connecting small type of speakers (S-BD310). [Mode 2]: Gives you suitable sound setting with connecting tall type of speakers (S-BD707T).
4 Operating 38 Operating General Playback Playing a Disc ert Using [HOME] menu 1. Press B (OPEN/CLOSE), and place a disc on the disc tray. The home menu appears when you press HOME MENU (n). Use W/S/A/D to select a category and press ENTER (b). 2. Press B (OPEN/CLOSE) to close the disc tray. For the most Audio CD, BD-ROM and DVD-ROM discs, playback starts automatically. 3. Press HOME MENU (n). 4. Select [Movie] or [Music] using A/D, and press ENTER (b). 5.
Operating 39 Playing Blu-ray 3D disc e Enjoying BD-Live™ e This player can play the Blu-ray 3D discs which contains separate views for the left and right eyes. BD-ROM supporting BD-Live (BD-ROM version 2 Profile 2) that has a network extension function allows you to enjoy more functions such as downloading new movie trailers by connecting this unit to the internet.
Operating Playing a file on a network server yui This player can play movie, music and photo files located in a PC or a DLNA server through your home network. 1. Check the network connection and settings (pages 27-29). 2. Press HOME MENU (n). 3. Select [Movie], [Photo] or [Music] using A/D, and press ENTER (b). 4. Select a DLNA media server or a share folder on your PC on the list using W/S, and press ENTER (b).
Operating Basic operations for video and audio content Basic operations for photo content To stop playback To play a slide show Press Z (STOP) while playback. Press d (PLAY) to start slide show. To pause playback To stop a slide show Press M (PAUSE/STEP) while playback. Press d (PLAY) to resume playback. Press Z (STOP) while slide show. To play frame-by-frame (Video) Press M (PAUSE/STEP) while movie playback. Press M (PAUSE/STEP) repeatedly to play Frame-byFrame playback.
Operating Resume playback eroyt, u The unit records the point where you pressed the Z (STOP) depending on the disc. If “MZ (Resume Stop)” appears on the screen briefly, press d (PLAY) to resume playback (from the scene point). If you press Z (STOP) twice or unload the disc, “Z(Complete Stop)” appears on the screen. The unit will clear the stopped point. ,,Note yy The resume point may be cleared when a button is pressed (for example; 1 (STANDBY/ON), B (OPEN/CLOSE), etc).
Operating 43 Advanced Playback Repeat Playback erotu During playback, press REPEAT (h) repeatedly to select a desired repeat mode. Blu-ray Disc/DVDs jA- – Selected portion will be repeated continually. jChapter – The current chapter will be played back repeatedly. jTitle – The current title will be played back repeatedly. To return to normal playback, press REPEAT (h) repeatedly to select [Off ]. Audio CDs/Music files :All – All the tracks or files will be played back repeatedly.
Operating Marker Search eroy Using the search menu eroy You can start playback from up to nine memorized points. Using search menu, you can easily to find the point where you want to start playback. To enter a marker To search a point 1. While playback, press MARKER at the desired point. The Marker icon appears on the TV screen briefly. 1. During playback, press SEARCH to display the search menu. 2. Repeat step 1 to add up to nine markers. To recall a marked scene 1.
Operating 45 Selecting a subtitle file y Last Scene Memory er If the subtitle file name is different from the movie file name, you need to select the subtitle file on the [Movie] menu before playing the movie. This unit memorizes the last scene from the last disc that is viewed. The last scene remains in memory even if you remove the disc from the unit or switch off the unit. If you load a disc that has the scene memorized, the scene is automatically recalled. 1.
Operating Options while viewing a photo i You can use various options during viewing a photo in full screen. 1. While viewing a photo in full screen, press DISPLAY (m) to display the option menu. 2. Select an option using W/S. Listening to music while slide show i You can display photo files while listening to music files. 1. While viewing a photo in full screen, press DISPLAY (m) to display the option menu. 2.
Operating 47 On-Screen display 2. Select an option using W/S. You can display and adjust various information and settings about the content. 4. Press RETURN (x) to exit the On-Screen display. Displaying content information on-screen eroy 1. While playback, press DISPLAY (m) to show various playback information. 3. Use A/D to adjust the selected option value. ,,Note yy If no button is pressed for a few seconds, the on-screen display disappears. yy A title number cannot be selected on some discs.
Operating Playing from selected time eroy Selecting a subtitle language eroy 1. Press DISPLAY (m) during playback. The time search box shows the elapsed playing time. 1. During playback, press DISPLAY (m) to display the On-Screen display. 2. Select the [Time] option and then input the required start time in hours, minutes, and seconds from left to right. 2. Use W/S to select the [Subtitle] option. For example, to find a scene at 2 hours, 10 minutes, and 20 seconds, enter “21020”.
Operating 49 Changing the TV Aspect Ratio eroy Changing the Picture Mode eroy You can change the TV aspect ratio setting while playback. You can change the [Picture mode] option while playback. 1. During playback, press DISPLAY (m) to display the On-Screen display. 1. During playback, press DISPLAY (m) to display the On-Screen display. 2. Use W/S to select the [TV Aspect Ratio] option. 2. Use W/S to select the [Picture Mode] option. 3. Use A/D to select desired option. 4.
Operating Audio CD Recording You can record one desired track or all of the tracks in Audio CD to a USB storage device. 1. Insert a USB storage device to the USB port on the front panel. 2. Press B (OPEN/CLOSE), and place an Audio CD on the disc tray. Press B (OPEN/CLOSE) to close the disc tray. The playback starts automatically. 3. Press DISPLAY (m) to display the option menu. Or Press X USB REC button on the remote control. You can record all musics in the audio CD. 4.
Operating Radio Operations Be sure that the antennas are connected. (Refer to the page 24) Listening to the radio 1. Press INPUT/TUNER until TUNER (FM) appears in the display window. The last received station is tuned in. 51 Deleting a saved station 1. Press PRESET (W/S) to select a preset number you want to delete. 2. Press CLEAR, the preset number will blink in the display window. 3. Press CLEAR again, to delete the selected preset number. Deleting all the saved stations 2.
Operating Using the Online You can use various content services via Internet with the Online feature. 1. Check the network connection and settings (pages 27-29). 2. Press HOME MENU (n). 3. Select the [Online] using A/D, and press ENTER (b). 4. Select an Online service using A/D, and press ENTER (b). 4 ,,Note Operating yy Detailed information of each service, contact to the content provider or visit support link of the service.
5 Troubleshooting Troubleshooting 53 Troubleshooting General Symptom Cause & Solution The Power does not turned on. yy Plug the power cord into the wall outlet securely. The unit does not start playback. yy Insert a playable disc. (Check the disc type, colour system, and regional code.) yy Place the disc with the playback side down. yy Place the disc on the disc tray correctly inside the guide. yy Clean the disc. yy Cancel the Rating function or change the rating level. The angle cannot be changed.
Troubleshooting Network Symptom Cause & Solution BD-LIVE feature does not work. yy The connected USB storage may not have enough space. Connect the USB storage with at least 1GB free space. yy Ensure that the unit is correctly connected to the local area network and can access the internet (see page 27-29). yy Your broadband speed may not fast enough to use the BD-LIVE features. Contact your Internet Service Provider (ISP) and increase the broadband speed is recommended.
Troubleshooting 55 Picture Symptom Cause & Solution There is no picture. yy Select the appropriate video input mode on the TV so the picture from the unit appears on the TV screen. yy Connect the video connection securely. yy Check the [HDMI Color Setting] in the [Setup] menu is set to the appropriate item that conforms to your video connection. yy Your TV may not support the resolution you have set on the player. Change the resolution that your TV accepts.
6 Appendix 56 Appendix Controlling a TV with the Supplied Remote Control You can control your TV using the buttons below. TV Control Buttons You can operate your TV with the supplied remote control. If your TV is listed in the table below, set the appropriate manufacturer code. 1. While holding down 1 (TV POWER) button, and press the manufacturer code for your TV with the numerical buttons (see the table below).
Appendix 57 Area Code List Choose an area code from this list.
Appendix Language code List Use this list to input your desired language for the following initial settings: [Disc Audio], [Disc Subtitle] and [Disc Menu].
Appendix 59 Trademarks and Licenses Blu-ray Disc™, Blu-ray™, Blu-ray 3D™, BD-Live™, BONUSVIEW™ and the logos are trademarks of the Blu-ray Disc Association. Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535; 7,392,195; 7,272,567; 7,333,929; 7,212,872 & other U.S. and worldwide patents issued & pending.
Appendix Video Output Resolution When the non-copy protected media is playing back Video Out Resolution 576i HDMI OUT COMPONENT VIDEO OUT HDMI connected HDMI disconnected 576p 576i 576p 576p 576p 720p 720p 720p 1080i 1080i 1080p/24 Hz 1080p / 24 Hz 576i 1080i 1080i 1080p / 50 Hz 1080p / 50 Hz 576i 1080i When the copy protected media is playing back Video Out Resolution 6 HDMI OUT COMPONENT VIDEO OUT 576i 576p 576i 576p 576p 576i or 576p 720p 720p 576i or 576p 1080i 10
Appendix 61 Specifications General Power requirements AC 220-240 V, 50/60 Hz Power consumption 150 W (In Standby mode: Less than 0.3 W) Dimensions (W x H x D) Approx. 430 x 64 x 304 mm Net Weight (Approx.) 3.4 kg Operating temperature 5 °C to 35 °C Operating humidity 5 % to 85 % Inputs/Outputs VIDEO OUT COMPONENT VIDEO OUT 1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1 (Y) 1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1 (Pb)/(Pr) 0.
Appendix Speakers for BCS-414 S-BD707T yy Front/Surround speaker (Left/ Right) Type 2 Way Net Dimensions (W x H x D) 260 x 1097 x 260 mm Impedance Rated 4Ω Net Weight 3.8 kg Type 1 Way Net Dimensions (W x H x D) 300 x 87 x 65 mm Impedance Rated 4Ω Net Weight 0.6 kg Type 1 Way Net Dimensions (W x H x D) 190 x 360 x 320 mm Impedance Rated 3Ω Net Weight 3.
Appendix 63 Maintenance Notes on Discs Handling Discs Handling the Unit When shipping the unit Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the factory. Keeping the exterior surfaces clean yy Do not use volatile liquids such as insecticide spray near the unit. yy Wiping with strong pressure may damage the surface.
Appendix Important Information Relating to Network Services All information, data, documents, communications, downloads, files, text, images, photographs, graphics, videos, webcasts, publications, tools, resources, software, code, programs, applets, widgets, applications, products and other content (“Content”) and all services and offerings (“Services”) provided or made available by or through any third party (each a “Service Provider”) is the sole responsibility of the Service Provider from whom it o
Appendix 65 Software License Notice The following GPL executables and LGPL libraries used in this product are subject to the GPL2.0/LGPL2.1 License Agreements: GPL EXECUTABLES: Linux kernel, bash, busybox, dhcpcd, e2fsprogs, fdisk, msdl-1.1, mtd-utils, net-tools, procps, psmisc, samba3.0.
Appendix modify the software. Also, for each author's protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original authors' reputations. Finally, any free program is threatened constantly by software patents.
Appendix 67 application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. under this License will not have their licenses terminated so long as such parties remain in full compliance. 5. 6. 7. You are not required to accept this License, since you have not signed it.
Appendix Also add information on how to contact you by electronic and paper mail. If the program is interactive, make it output a short notice like this when it starts in an interactive mode: Gnomovision version 69, Copyright © year name of author Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. This is free software, and you are welcome to redistribute it under certain conditions; type `show c' for details.
Appendix 69 of this License. If a facility in the modified Library refers to a function or a table of data to be supplied by an application program that uses the facility, other than as an argument passed when the facility is invoked, then you must make a good faith effort to ensure that, in the event an application does not supply such function or table, the facility still operates, and performs whatever part of its purpose remains meaningful.
Appendix of the Library, you may distribute the object code for the work under the terms of Section 6. Any executables containing that work also fall under Section 6, whether or not they are linked directly with the Library itself. 6.
Appendix This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 12. If the distribution and/or use of the Library is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Library under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded.
http://www.pioneer.co.uk http://www.pioneer.eu Published by Pioneer Corporation. Copyright © 2011 Pioneer Corporation. All rights reserved. PIONEER CORPORATION 1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, Japan PIONEER ELECTRONICS (USA) INC. P.O. BOX 1540, Long Beach, California 90801-1540, U.S.A. TEL: (800) 421-1404 PIONEER ELECTRONICS OF CANADA, INC.