Operation Manual

Connecting 21
En
Connecting
2
Chapter 2
Connecting
Assemble the speakers
Speaker setup for BCS-424
Preparing the speakers
1. Connectthewirestotheplayer.
Insertthecablesconnectedtotheplayerto
thesamecoloredconnectoronthespeaker.
Caution
• ThesespeakerterminalscarryHAZARDOUSLIVE
voltage.Topreventtheriskofelectricshockwhen
connectingordisconnectingthespeakercables,
disconnectthepowercordbeforetouchingany
uninsulatedparts.
• Donotconnectanyspeakersotherthanthose
suppliedtothissystem.
• Donotconnectthesuppliedspeakerstoany
amplifierotherthantheonesuppliedwiththis
system.Connectiontoanyotheramplifiermay
resultinmalfunctionorfire.
2. Attachthenon-skidpadstothebaseof
eachspeaker.
Non-skid pads
3. Mountthefront/surroundspeaker.
1
 Passthespeakercablethroughthecable
holeonthesideofthebase.
2
 Insertthelowercabinettothebasesothat
thecableholeispositionedatthebackside.
3
 Fixthebasetothelowercabinetfromthe
underside,usingthefourscrews(M4x16).
4
 Inserttheuppercabinettothelower
cabinet.