Operation Manual

Advanced settings62
En
Advanced settings
8
Adjusting the video
1. Select and set Display Setting
d
Video
Adjust
d
Next Screen.
Use
/ toselect,thenpress
ENTER
.
2. Select the item and change the setting.
Use
/ toselecttheitem,thenuse
/
tochangethesetting.Oncethesettingis
completed,press
RETURN
toclosethe
settingsscreen.
Item Description
Brightness SelectthistoadjusttheTVscreen’s
brightness.
Contrast SelectthistoadjusttheTVscreen’s
contrast.
Hue Selectthistoadjustthecolor(green
andred)balanceoftheTVscreen.
Saturation SelectthistoadjusttheTVscreen’s
saturation.
Adjust speaker settings
1. Select and set Audio Output
d
Speaker
Setup
d
Next Screen.
Use / / / toselect,thenpress
ENTER
.
2. A picture of speakers will be shown on
the screen. Select the speaker using
cursor and press ENTER.
3. Use
/ to select Trim or Delay and
then press ENTER.
4. Use cursor
/ to adjust the setting,
then press ENTER.
Adjust speaker settings while listening
to a sound
1. Select and set Audio Output
d
Test
Tone
d
Next Screen.
Use / / / toselect,thenpress
ENTER
.
2. A test tone will be output. The speakers
will switch automatically.
3. A picture of speakers will be shown
on the screen. Press ENTER when
the speaker you wish to adjust to is
focused.
4. Use
/ to select Trim or Delay and
then press ENTER.
5 Use
/ to adjust the setting, then press
ENTER.
*1ms=30cm
Setting the IP address
1. Select and set Network
d
IP Setting
d
Next Screen.
Use
/ toselect,thenpress
ENTER
.
2. Set IP address.
Use
/ / / tosettheIPaddressofthe
playerorDNSserver,thenpress
ENTER
.
y
Auto Set IP Address
On
–Theplayer’sIPaddressisobtained
automatically.Selectthiswhenusing
abroadbandrouterorbroadband
modemthathasaDHCP(DynamicHost
ConfigurationProtocol)serverfunction.
Thisplayer’sIPaddresswillautomatically
beallocatedfromtheDHCPserver.
O
–Theplayer’sIPaddressmustbeset
manually.Usethenumberbuttons(0to
9)toinputtheIPaddress,subnetmask
anddefaultgateway.
Note
y
ForinformationontheDHCPserverfunction,
refertotheoperatinginstructionsforthe
networkdevice.
y
YoumayneedtocontactyourInternetservice
providerornetworkadministratorwhen
inputtingtheIPaddressmanually.