Operation Manual

Advanced settings66
En
Advanced settings
8

Updating using a USB flash drive/disc
Note

y
WhenanupdatefileisprovidedonthePioneer
website,useyourcomputertodownloadit
ontoaUSBflashdriveordisc.Carefullyread
theinstructionsondownloadingupdatefiles
providedonthePioneerwebsite.

y
Storetheupdatefileintherootdirectoryofthe
USBflashdriveordisc.Donotstoreitwithina
folder.

y
Donotputanyfilesotherthantheupdatefile
ontheUSBflashdriveordisc.

y
Toupdateusingadisc,useaCD-RorCD-RW
disc.

y
TheplayersupportsUSBflashdriveformatted
inFAT32/16.WhenformattingaUSBflash
driveonyourcomputer,dosowiththesettings
below.
– Filesystem:FAT32
– Allocationunitsize:Defaultallocationsize

y
Onlystorethemostrecentupdatefileonthe
USBflashdriveordisc.

y
DonotuseaUSBextensioncabletoconnect
aUSBflashdrivetotheplayer.UsingaUSB
extensioncablemaypreventtheplayerfrom
performingcorrectly.

y
Steps
1
to
5
aretheoperationsperformedby
theuser.

y
Steps
6
to
7
aretheoperationsperformed
(automatically)bytheplayer(theyareintended
toupdatethesoftware).
1. Plug in the USB flash drive or load the
disc on which the update file is stored.
2. When playback is stopped, display the
Home Menu screen.
Press

HOME MENU
.
3. Select and set Initial Setup.
Use
/ toselect,thenpress
ENTER
.
4. Select and set Options
d
Update
d
Disc or USB Storage
d
Start.
Use
/ toselect,thenpress
ENTER
.
5. Select and set Yes.
Use
/ / / toselect
Yes
,thenpress
ENTER
.
6. Updating starts.

y
Softwareupdatingmaytakeacertain
periodoftime.
7. Updating completes.
Restoring all the settings to
the factory default settings
1. Check that the player’s power is turned
on.
2. When playback is stopped, display the
Home Menu screen.
Press

HOME MENU
.
3. Select and set Initial Setup.
Use
/ toselect,thenpress
ENTER
.
4. Select and set Options
d
Load Default
d
Next Screen.
Use
/ toselect,thenpress
ENTER
.
5. Select and set OK.
Use
/ toselect,thenpress
ENTER
.
6. Press

STANDBY/ON to turn off the
power.
7. Press

STANDBY/ON to turn on the
power.
Note

y
Afterrestoringallthesettingstothefactory
defaultsettings,use
Setup Navigator
toreset
theplayer(page36).