Manual

Connecting20

Connecting

Speaker Setup for BCS-FS515

Preparing the speakers

For subwoofer:

Use the supplied adhesive to attach four large pads

to the base of subwoofer.

Large non-skid pads

For front speakers:

Assembling the speaker stands and securing your

front speakers.

For vertical instllation

1. Use the supplied adhesive to attach 4 small

pads to the speaker stand base.

Small non-skid pads

2. Insert the large pole from the holes behind the

base and secure with the 4 screws.

3. Insert the speaker cord from the hole behind

the base through to the pole and connect it to

the speaker terminal. After connecting, put the

speaker wire in the gap on the back side of the

speaker.

Match the colour-corded wire with the colour

indicator on the label, then insert the colour-

corded wire into the red (+) side and the other

wire into the black (–) side.

HB516-RD1_BDEUPPK_ENG.indd 20 2011-06-02 �� 11:01:27