DIGITAL HOME TERMINAL BD-V1000 Series Operating Instructions
CONTENTS ABOUT THIS MANUAL ........................................ 4 BD-V1000 DIAGRAM ........................................... 4 FEATURE IDENTIFICATION ................................. 5 CONNECTIONS ................................................... 6 CABLE TV RECEPTION ....................................... 7 TROUBLESHOOTING .......................... Back Cover TRADEMARKS AND COPYRIGHTS .....
IMPORTANT SAFEGUARDS READ INSTRUCTIONS – All the safety and operating instructions should be read before the appliance is operated. RETAIN INSTRUCTIONS – The safety and operating instructions should be retained for future reference. HEED WARNINGS – All warnings on the appliance and in the operating instructions should be adhered to. FOLLOW INSTRUCTIONS – All operating and usage instructions should be followed. CLEANING – Do not use liquid cleaners or aerosol cleaners.
ABOUT THIS MANUAL INTRODUCTION FOCUS OF THIS MANUAL Cable TV brings a wide array of home entertainment to the cable viewer. To enjoy that programming, your television must first be set up to receive the cable signal. Much of how your BD-V1000 Voyager Home Terminal operates is determined by your cable TV service provider. Those operating instructions may be found in a separate manual.
FEATURE IDENTIFICATION FRONT PANEL REAR PANEL BYPASS LIGHT Lights when the optional RF Bypass Adapter module is switched to bypass mode. When in bypass mode, the Adapter sends cable signals directly to the TV. CHANNEL AND VOLUME CONTROL/ CURSOR MOVEMENT KEYS These keys have different functions, depending on what is displayed on the TV screen. During normal TV viewing, the 5/ ∇ (up/down) arrows change the channel by stepping up or down one channel at a time.
CONNECTIONS BD-V1000 CONNECTIONS These are some suggested basic hook-up diagrams for the BD-V1000, both with and without a VCR. Simple Connection. This is the simplest connection, but does not provide stereo sound on analog channels. BD-V1000 Home Terminal CATV Service L R ETHERNET SERIAL USB PORT DIGITAL S-VIDEO VIDEO AUDIO CABLE IN TO TV AUDIO Detachable AC power cord (included) 75-ohm VHF ANTENNA IN Unswitched AC outlet TV Set Stereo Connection.
CABLE TV RECEPTION CONNECTION PROCEDURES Connect your equipment as shown in the figures on page 6. Use the first table if you are only connecting the BD-V1000 to a TV. STEP ACTION 1 Connect cable service to BD-V1000 CABLE IN (input connector). ¶ If TV has video and stereo audio inputs: 2 Follow the Stereo Connection diagram on page 6. Connect BDV1000 L/R AUDIO OUT and VIDEO OUT to the corresponding IN jacks on the TV, using shielded RCA (phono) jumper cables.
TROUBLESHOOTING NO TV PICTURE? Use the checklist in the table if you followed all the instructions but still do not see a picture on your television.