Owner's Manual

Playing Video, Audio and Image
Files
BD-RE BD-R
DVD-R
DVD-RW
CD-R
CD-RW
USB
NOTE
When you insert or remove a USB memory device, be sure •
to turn the main power off.
Do not disconnect the USB memory device while it is •
playing.
Files on the USB memory device cannot be played when •
one of the discs below is loaded. Remove the disc.
BDs in BDMV or BDAV format –
DVDs in VR, video or AVCHD format –
Music CDs –
For details on playable files, see “Types of Discs that Can •
Be Used with This Player” (page 4) and “About Files” (page
6).
When playing normal image files, the images are played •
one at a time. With slide shows, the image switches
automatically.
Playback
Load the disc or connect the USB memory 1
device on which the image files are recorded,
then press HOME MENU to display the HOME
MENU.
Use
2  to select “Disc Navigator” (for video
files), “Music” (for audio files) or “Photo” (for
image files), then press ENTER.
If only a disc or only a USB memory device is loaded/•
connected, proceed to step 4.
Use 3  to select “BD/DVD/CD” or “USB
Memory Device”, then press ENTER.
Select the file or folder.
4
Use •  to select the file.
When a folder is selected using •  and ENTER is
pressed, the files in the folder are displayed.
Press 5 ENTER to play the file.
When •  PAUSE is pressed during playback, playback
pauses. Press  PAUSE again or press  PLAY to
resume playback.
Press 6  or  to switch to the
previous or next file.
Image files are switched using •  and  REV/
 FWD. When RETURN is pressed, the file
selection screen reappears.
Press 7  STOP to stop playback.
NOTE
The following functions cannot be used during playback of •
audio files:
Fast-forwarding/fast-reversing –
Repeat function –
Function control (page 19) –
Selecting and playing a different
audio file during playback of an
audio file
Press 1  to select the file.
1
5
:
1
6
2
5
:
1
0
3
5
:
2
3
4
5
:
0
3
5
4
:
4
4
6
5
:
0
8
0
0
:
0
0
:
1
1
3
/
1
2
3
L
+
R
5
:
2
3
0
:
0
0
Music03.mp3
Select Enter
Functions
Music02.mp3
Music01.mp3
Music03.mp3
Music04.mp3
Music05.mp3
Music06.mp3
Press 2 ENTER to start playing the file.
The selected file is played.•
Playing back Slide Show
Load the disc or USB memory device on which 1
the image files are recorded, then press HOME
MENU to display the HOME MENU.
Press
2  to select “Photo”, then press
ENTER.
If only a disc or only a USB memory device is loaded/•
connected, proceed to step 4.
Press 3  to select “BD/DVD/CD” or “USB
Memory Device”, then press ENTER.
Select the folder.
4
Press 5 ENTER to play the file.
Press •  PAUSE to pause the slide show. Press
 PLAY to resume playback from where it stopped.
Press 6  STOP to stop the play at any time.
Press • RETURN to play a slide show of still images
in another folder.
Setting slide show speed/repeat
playback
Press 1 YELLOW (Slide Show Menu) during the
folder selection screen.
The setting screen for “Slide Show Speed”/“Repeat •
Mode Setting” appears.
Press 2  to select “Slide Show Speed”, then
press ENTER.
Slide Show Speed
Repeat Mode Setting
Normal
The slide show speed may be selected from “Fast”, •
“Normal”, “Slow1” and “Slow2”.
Press 3  to select the desired speed, then
press ENTER.
Press
4  to select “Repeat Mode Setting”,
then press ENTER.
Yes
No
Slide Show Speed
Repeat Mode Setting
Press 5  to select the desired item, then
press ENTER.
Press
6 EXIT to exit.
17
Playback