Owner's Manual

01
14
En
Front Panel
1  STANDBY/ON – Press to turn the power on and
off.
•If the power cannot be turned off (to standby), press
and hold the button for over 5seconds. The unit
restarts and can now be operated.
2 FL OFF indicator – (page 12)
3 Disc tray
4 Front panel display
5 Remote control sensor – Point the remote control to
this, then operate it within approximately 23 feet
(7 m).
The p layer may have trouble capturing remote control
signals if there is a fluorescent light nearby. If this
happens, move the player away from the fluorescent
light.
6PQLS indicator – (page 18)
7  OPEN/CLOSE – Press to open and close the disc
tray.
8  – Press to stop pla
ybac
k.
9 USB port – (page 20)
10  – Press to start playback.
Front Panel Display
1  – This lights during playback.
2  – This lights when pausing.
3HD – This lights when an HDMI cable is connected
and video signals are being output with a resolution of
1080/50i, 1080/50p, 720/50p, 1080/24p, 1080/60i,
1080/60p or 720/60p.
4LAN – This lights when connected to a network.
5 Character display – Displays the title/chapter/track
number, elapsed time, etc.
6 24HZ/50HZ/60HZ – The frequency of the video frame
or field being output lights.
7EXT – This lights when a USB device is connected.
8CONTROL – This lights when the Control setting is
turned on.
9 HDMI 1 2 – This lights when an HDMI device is
connected. [1] lights when the device is connected to
the HDMI OUT (MAIN) terminal, [2] lights when the
device is connected to the HDMI OUT (SUB)
terminal.
1 2 3 4 5 6 7 8 9 10
LANHD
24HZ
50HZ
60HZ
HDMI 1 2
CONTROL
EXT
1
56789
2
43
BDP-62FD_UCXE_EN.book 14 ページ ２０１２年６月２１日 木曜日 午前１１時３０分