Owner's Manual

02
18
En
 Stream Smoother
Stream Smoother is a function that automatically
improves picture quality when playing network video
contents by using a built-in high picture quality circuit to
reduce mosquito noise, block noise, etc.
Stream Smoother function on this player works
exclusively with the following situations.
•When playing a video distribution service on a
network or PC contents stored on a medium.
Note
• This function is activated even when no AV receiver is
connected.
 About the PQLS function
PQLS (Precision Quartz Lock System) is a digital audio
transfer control technology using the HDMI control
function. The player’s output signals are controlled from
the AV receiver to achieve high sound quality playback
using the receiver’s quartz oscillator. This eliminates the
influence of the jitter generated during signal transfer
which can adversely affect the sound quality.
•This player supports the functions below.
– The “PQLS 2ch Audio” function that is activated
when playing music CDs (CD-DAs)
– The “PQLS Multi Surround” function that is
activated when playing all discs (BDs, DVDs, etc.)
with linear PCM audio output
–The “PQLS Bitstream” function that is activated
when playing with bitstream audio output
•The various PQLS functions are activated when a
Pioneer AV receiver supporti
ng the PQLS functions is
connect
ed directly to the HDMI OUT terminal with an
HDMI cable and the player’s settings are set as
shown below (page 40).
Control: On
•Also refer to the AV receiver’s operating instructions.
• See the Pioneer website for AV receivers supporting
the PQLS function.
Caution
• The PQLS function may stop working when the video
output resolution is switched. The PQLS function will
start working again once playback is stopped then
restarted.
• When the PQLS 2ch function is activated, the output
from the player’s VIDEO OUTPUT jacks may not have
the proper colors. If this happens, connect the TV and
AV rec
eiver’s HDMI term
inals to view the picture.
•Turn on the power of the AV receiver connected to the
HDMI OUT terminal, then start playback of the disc.
Note
•PQLS indicator on the player’s front panel display
lights when the PQLS function is activated (page 14).
Connecting a TV
See Connecting an AV receiver or amplifier on page 19 to
connect an AV receiver or amplifier using an HDMI cable.
Caution
•Hold the plug when connecting and disconnecting
the cable.
• Placing a load on the plug could result in faulty
contact and no video signals being output.
Connect a TV to the HDMI OUT (MAIN) terminal.
It is also possible to connect a TV via AV reciever or
amplifier to HDMI OUT (MAIN) terminal. See Connecting
an AV receiver or amplifier on page 19.
Caution
•Make sure to set HDMI Mode to Dual (page 39).
Match the direction of
the plug to the terminal
and insert straight.
HDMI cable (commercially available)
TV
Direction of signal flow
Player’s rear panel
It is also possible to connect to an
AV receiver or amplifier using an
HDMI cable (page 19).
To HDMI
input terminal
BDP-62FD_UCXE_EN.book 18 ページ ２０１２年６月２１日 木曜日 午前１１時３０分