Owner's Manual

19
En
02
Connecting an AV receiver or
amplifier
Connect to an AV receiver or amplifier in order to enjoy
the surround sound of Dolby TrueHD, Dolby Digital Plus,
Dolby Digital, DTS-HD Master Audio, DTS-HD High
Resolution Audio or DTS Digital Surround. For
instructions on connecting the TV and speakers to the AV
receiver or amplifier, refer to the operating instructions
for AV receiver or amplifier.
Caution
•Hold the plug when connecting and disconnecting
the cable.
• Placing a load on the plug could result in faulty
contact and no video signals being output.
Achieving better video and sound quality
When connecting one TV (or projector) and AV amplifier
to the player, connect in such a way that the video and
audio signals are transferred
separatel
y in order to
achieve higher quality video and sound.
Caution
•Make sure to set HDMI Mode to Separate (page 39).
•If the AV amplifier connected to the HDMI OUT (SUB)
terminal is also connected to a TV, the TV’s input may
switch automatically. If this happens, turn off the
control function with HDMI on the TV.
Match the
direction of the
plug to the
terminal and
insert straight.
Player’s rear panel
HDMI cable
(commercially available)
AV receiver
or amplifier
AV receiver
or amplifier
AV receiver
or amplifier
AV receiver
or amplifier
TV
Direction of signal flow
To HDMI input terminal
HDMI cable
(commercially
available)
From HDMI output
terminal to HDMI input
terminal
Player’s rear panel
Match the
direction of the
plug to the
terminal and
insert straight.
HDMI cable
(commercially available)
AV receiver
or amplifier
TV
To HDMI input terminal
Direction of signal flow
BDP-62FD_UCXE_EN.book 19 ページ ２０１２年６月２１日 木曜日 午前１１時３０分