Owner's Manual

39
En
07
Audio Output
Digital Output Bitstream Select this to output digital audio signals directly.
PCM Select this to output digital audio signals converted to 2-channel audio
signals.
Reencode When a BD containing secondary audio and interactive audio is played, the
two audio signals are mixed and converted to Dolby Digital audio or DTS
audio for output.
Off Select this to output audio signals other than digital audio signals.
DTS Downmix Stereo DTS-HD Master Audio signals, DTS-HD High Resolution Audio signals or
DTS Digital Surround audio signals converted to linear PCM audio signals
are converted into 2-channel (stereo) signals for output.
Lt/Rt DTS-HD Master Audio signals, DTS-HD High Resolution Audio signals or
DTS Digital Surround audio signals converted to linear PCM audio signals
are converted into 2-channel signals compatible with Dolby Surround for
output (when the connected AV receiver or amplifier, etc., is compati
ble with
Dolby Pro Logic,
the AV receiver or amplifier outputs the linear PCM audio
signals as surround audio signals).
Downsampling 48k Outputs audio signals that are limited to a sampling frequency below the set
sampling frequency from the DIGITAL OUT terminal. Select according to the
performance of the connected device.
96k
192k
• Sources with sampling frequencies of over 192 kHz cannot be played.
• When playing copyright-protected discs or files, the signals are output with the sampling frequency limited to 48 kHz or below,
regardless of this setting.
DRC (Dynamic Range
Control)
Off Select this to output audio signals without using the DRC function.
On Select this to adjust the ra
nge between the loudest and softest sounds
(dynamic
range) for playback at average volume. Use this when it is hard to
hear dialog or when watching movies at midnight.
Auto Select to switch the DRC setting On/Off automatically according to the input
audio signal from the disc. This only affects Dolby TrueHD signals.
• This affects such audio signals as Dolby Digital, Dolby TrueHD, and Dolby Digital Plus.
• DRC affects audio signals output from the following audio output terminals:
–Linear PCM audio signals output from the DIGITAL OUT or HDMI OUT terminals
• Depending on the disc, the effect may be weak.
• The effect may differ depending on the speakers, the AV amplifier settings, etc.
HDMI
HDMI Mode Dual Video and audio are output simultaneously from the two HDMI OUT terminals.
Select this when you want to output video and audio to two TV sets simultaneously.
Separate Select this when you want to output the video and audio separately, the video from
the HDMI OUT (MAIN) terminal, the audio from the HDMI OUT (SUB) terminal.
Pure Audio Select this to enjoy music only with a better sound quality when devices are
connected to both HDMI output terminals. With this setting, music is output
from the HDMI OUT (SUB) terminal only, and video signals ar e only output
from the HDMI OUT (MAIN) terminal when DISPLAY is pressed.
Also refer to Setting the HDMI Mode on page 17.
Color Space RGB Select this to output the video signals as RGB signals. Choose this if the
colors seem too faint and the black seems too bright.
YCbCr Select this to output the video signals as YCbCr 4
:4:4 s
ignals.
YCbCr 422 Select this to output the video signals as YCbCr 4:2:2 signals.
Full RGB Select this to output the video signals as RGB signals. Choose this if the colors
seem too dense and all the dark colors are displayed in a uniform black.
Resolution Auto Select this to choose the resolution of the video signals output from the
HDMI OUT terminal automatically.
480P/576P Output the video signals from the HDMI OUT terminal with the selected
resolution.
The resolution can be changed by pressing HDMI, but Auto cannot be
selected.
The resolution switches when HDMI is pressed and held for over 2 seconds.
720P
1080I
1080P
Setting Options Explanation
BDP-62FD_UCXE_EN.book 39 ページ ２０１２年６月２１日 木曜日 午前１１時３０分