Owner's Manual

07
44
En
 Changing the Country/Area code
1 Select and set Security  Country Code  Next
Screen.
Use / to select, then press ENTER.
2 Input the password.
Use the number buttons (0 to 9) to input the number, then
press ENTER to set.
Use / to move the cursor.
3 Change the country/area code.
Use / to change, then press ENTER to set. Refer to
page 47.
Software updating
The player’s software can be updated using one of the
methods shown below.
• Connecting to the Internet.
• Using a disc.
• Using a USB flash drive.
Product information on this player is provided on the
Pioneer website. Check the website shown on page 6 for
update and service information on your Blu-ray disc
player.
Caution
•Do not perform the actions below while the softwar e
is being updated. Doing so will interrupt updating and
could lead to malfunction.
– Disconnecting a USB memory device
–Unplugging the power cord
–Pressing  STANDBY/ON on the main unit's front
panel for over 5 seconds.
•There are two processes for s
oftware updati
ng,
downloading and updating. Both processes may take
a certain period of time.
•Other operations are defeated during software
updating. Furthermore, up dating process cannot be
canceled.
•When the front panel display is off, turn it on with FL
DIMMER. When updating the player’s software with
the front panel display off, do not unplug the power
cord until the unit turns off.
 Updating connecting to the Internet
1 Connect to the Internet.
2 When playback is stopped, display the Home
Menu screen.
Press HOME MENU.
3 Select and set Initial Setup.
Use / to select, then press ENTER.
4 Select and set Options  Update  Network 
Start.
Use /// to select, then press ENTER.
5 Updating starts.
Press ENTER.
•Software updating may take a certain period of time.
• When updating is completed, the unit restarts
automatically.
 Updating using a USB flash drive/
disc
Note
• When an update file is provided on the Pioneer
website, use your computer to download it onto a
USB flash drive or disc. Carefully read the
instructions on downloading update files provided on
the Pioneer website.
•Store the update file in the root directory of the USB
flash drive or disc. Do not store it within a folder.
•Do not put any files other than the update file on the
USB flash drive or disc.
•To update using a disc, use a CD-R or CD-RW disc.
• This unit supports USB flash drives formatted in
FAT32, FAT16 or NTFS. When formatting a USB flash
drive on your computer, do so with the settings below.
– File system: FAT32
– Allocation unit size: Default allocation size
•Only store the most recent update file on the USB
flash driv
e or disc.
• Do
not use a USB extension cable to connect a USB
flash drive to the player. Using a USB extension cable
may prevent the player from performing correctly.
1 Plug in the USB flash drive or load the disc on
which the update file is stored.
2 When playback is stopped, display the Home
Menu screen.
Press HOME MENU.
3 Select and set Initial Setup.
Use / to select, then press ENTER.
4 Select and set Options  Update  Disc or USB
Storage  Start.
Use /// to select, then press ENTER.
5 Updating starts.
Press ENTER.
•Software updating may take a certain period of time.
• When updating is completed, the unit restarts
automatically.
BDP-62FD_UCXE_EN.book 44 ページ ２０１２年６月２１日 木曜日 午前１１時３０分