Operating Instructions Blu-ray Disc PLAYER
Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference.
CAUTION This product is a class 1 laser product, but this product contains a laser diode higher than Class 1. To ensure continued safety, do not remove any covers or attempt to gain access to the inside of the product. Refer all servicing to qualified personnel. The following caution label appears on your unit.
$ " ! " $ $ $ ! ! $ ! $ ! " "
We Want You Listening For A Lifetime Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your musical enjoyment. Now it’s time to consider how you can maximize the fun and excitement your equipment offers. This manufacturer and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level.
Contents 01 Before you start 05 Adjusting audio and video What’s in the box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Putting the batteries in the remote control. . . . . . . . . . . . . . . . . . . 7 Types of discs/files that can be played. . . . . . . . . . . . . . . . . . . . . . . . 8 Playable discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Playable files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter 1 01 Before you start What’s in the box Remote control x 1 STANDBY/ON 3 Close the rear cover. Close securely (a click should be heard). Audio cable (white/red plugs) x 1 OPEN/CLOSE TV CONTROL INPUT SELECT CH AUDIO SUBTITLE VOL ANGLE FL DIMMER Video cable (yellow plugs) x 1 Caution ENTER CLEAR OUTPUT RESOLUTION SECONDARY AUDIO VIDEO Power cable x 1 VIDEO SELECT PLAY MODE HOME MEDIA GALLERY DISPLAY POPUP MENU • Batteries may have different voltages, even if they look similar.
01 Types of discs/files that can be played Playable discs Discs with the logo marks below indicated on the disc label, package or jacket can be played.
Discs that cannot be played 01 • HD DVDs • DVD Audio discs • DVD-RAM discs • Non-finalized DVD-R/DVD-RW/DVD+R/DVD+RW discs in the DVD-Video format and AVCHD format • Non-finalized Dual Layer DVD-R discs in the DVD VR format • SACDs Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. • Video CDs • SVCDs This player conforms to NTSC standards. Discs for which “NTSC” is indicated on the disc label, package or jacket can be played.
01 Playing DVDs • DVD-Video can be played. DualDisc playback • DVD-R/-RW/+R/+RW discs recorded in the DVD-Video format can be played (finalize them before playing them on this player). A DualDisc is a new two-sided disc, one side of which contains DVD content — video, audio, etc. — while the other side contains nonDVD content such as digital audio material. • DVD-R/-RW discs recorded in the VR format (Video Recording format) can be played.
Part Names and Functions 5 Remote Control STANDBY/ON OPEN/CLOSE 1 15 TV CONTROL 4 3 INPUT SELECT CH AUDIO SUBTITLE VOL ANGLE FL DIMMER 16 17 5 7 8 OUTPUT RESOLUTION SECONDARY AUDIO VIDEO 18 VIDEO SELECT PLAY MODE HOME MEDIA GALLERY DISPLAY POPUP MENU MENU 20 TOOLS TOP MENU 9 22 10 19 21 RETURN 11 23 PLAY 13 14 7 VIDEO SELECT Press to switch the terminal from which the video signals are output.
01 21 DISPLAY Press to display disc information (page 29). 18 OUTPUT RESOLUTION Use these to switch the output video resolution from the HDMI OUT or COMPONENT VIDEO output terminals (page 25). 22 TOOLS Press to display/hide the TOOLS menu (page 23). 19 PLAY MODE Press to display/hide the Play Mode screen (page 29). 23 RETURN Press to return to the previous screen. 20 POP UP MENU/MENU Press to display the BD-ROM or DVD-Video menus.
Front Panel Display 1 2 01 3 PQLS 24HZ CONTROL 50HZ 60HZ 6 5 4 1 Lights during playback. 4 Character display Displays the title/chapter/track number, elapsed time, etc. 2 Lights when playback is paused. 5 24HZ/50HZ/60HZ The frequency of the video frame or field being output lights. 3 PQLS Lights when the PQLS function is activated (page 15). 6 CONTROL Lights when the HDMI Control function is activated (page 15).
02 Chapter 2 Connecting up Connecting a TV Player’s rear panel FRONT SURROUND SURROUND CENTER BACK L L R R AUDIO OUT (2 ch) Be sure to turn off the power and unplug the power cord from the power outlet whenever making or changing connections. AUDIO OUT (7.1 ch) DIGITAL OUT SUB WOOFER VIDEO OUT COMPONENT VIDEO AC IN Y COAXIAL CONTROL IN HDMI OUT PB VIDEO PR S-VIDEO OPTICAL Note HDMI OUT • Make the settings in the Setup Navigator menu according to the type of cable connected (page 20).
Audio signals that can be transferred with the player’s HDMI output terminal • Dolby TrueHD • Dolby Digital Plus • Dolby Digital • DTS-HD Master Audio • DTS-HD High Resolution Audio • DTS Digital Surround • MPEG-2 AAC • Linear PCM Linear PCM audio signals meeting the following conditions can be output: – Sampling frequency: 32 kHz to 192 kHz – Number of channels: Up to 8 (up to 6 for a 192 kHz sampling frequency) For details, see About the audio output settings on page 50.
02 Connecting using a commercially available component video cable Player’s rear panel FRONT SURROUND Connecting using the included audio cable and video cable SURROUND CENTER BACK L L R R AUDIO OUT (2 ch) AUDIO OUT (7.1 ch) DIGITAL OUT SUB WOOFER VIDEO OUT COMPONENT VIDEO cable for 2-channel connections, a combination of the included cable and commercially available cables for 7.1-channel connections).
Caution • Video signals are only output with a resolution of 480/60i when connected using a video cable (included) or an S-Video cable (commercially available). • When connected to a TV using a video cable or an S-Video cable, also connect using either audio cables (use the included cable for 2-channel connections, a combination of the included cable and commercially available cables for 7.
02 Connecting using audio cables Connecting using a commercially available digital audio cable Caution • For DTS-HD Master Audio and DTS-HD High Resolution Audio signals, the DTS Digital Surround signals are converted to linear PCM for output (page 50). Connect either an optical digital audio cable or a coaxial digital audio cable. Player’s rear panel FRONT SURROUND When connecting to a 7.
Connecting the power cord 02 Connect the power cord after all the connections between devices have been completed. Player’s rear panel FRONT SURROUND SURROUND CENTER BACK L L R R AUDIO OUT (2 ch) AUDIO OUT (7.
03 Chapter 3 Getting Started Making settings using the Setup Navigator menu 4 Select and set the video and audio output terminals. Select the actually connected video and audio output terminals. Use /// to select, then press ENTER. TOOLS TOP MENU Be sure to perform these settings when using the player for the first time. ENTER HOME MENU Caution • Before turning on the power, check that the connections between the player and other devices are correct.
– When connecting using component video cables, an S-Video cable or a video cable to watch the picture, connect to an AV receiver or amplifier, or a TV using either analog audio cables (7.1 channels or 2 channels), an optical digital audio cable or a coaxial digital audio cable (page 18). For details on the resolution settings, see Switching the output video resolution on page 25.
03 10 Finish the Setup Navigator menu. Use / to select Finish, then press ENTER. Setup Navigator BD PLAYER Setup is complete! • If you make a mistake when inputting the code, start over from the beginning. • When there are multiple codes for a manufacturer, try inputting them in the indicated order until the TV can be operated. 2 Check that the TV can be operated. STANDBY/ON OPEN/CLOSE Go Back Finish TV CONTROL INPUT SELECT The setup menu comes back in 30 seconds.
INTERVISION 46, 49 ISUKAI 41 ITC 42 ITT 31, 32, 42 JEC 05 JVC 13, 23 KAISUI 18, 41, 44 KAPSCH 31 KENDO 42 KENNEDY 32, 42 KORPEL 07 KOYODA 44 LEYCO 07, 40, 46, 48 LIESENK&TTER 07 LOEWE 07 LUXOR 32, 42, 43 M-ELECTRONIC 31, 44, 45, 54, 56, 07, 36, 51 MAGNADYNE 32, 49 MAGNAFON 49 MAGNAVOX 07, 10, 03, 12, 29 MANESTH 39, 46 MARANTZ 07 MARK 07 MATSUI 07, 39, 40, 42, 44, 47, 48 MCMICHAEL 34 MEDIATOR 07 MEMOREX 44 METZ 31 MINERVA 31, 53 MITSUBISHI 09, 10, 02, 21, 31 MULTITECH 44, 49 NEC 59 NECKERMANN 31, 07 NEI 07,
03 Item Description Add to HMG Playlist Add the selected track or file to the HMG Playlist (page 35). 3 Erase the data. Use / to select Yes, then press ENTER. TOOLS TOP MENU Delete from HMG Playlist Delete the selected track or file from the HMG Playlist (page 36). Now Playing Display the playback screen of the currently playing track or file. Video Adjust Display the picture quality adjustment screen (page 37). Audio DRC Adjust the Audio DRC (page 38).
Switching the output video resolution Use the procedure below to switch the output video resolution from the various video output terminals. Press OUTPUT RESOLUTION. ENTER CLEAR SECONDARY AUDIO VIDEO OUTPUT RESOLUTION DISPLAY About Film material POPUP MENU MENU The current output video resolution is displayed on the TV screen and on the player’s front panel display. When pressed again, the output video resolution switches.
04 Chapter 4 Playback Playing discs or files Resuming playback from where it was stopped (resume playback function) • When STOP is pressed during playback, the point at which the disc stopped is stored in the memory. When PLAY is pressed, playback resumes from that point. This section describes the player’s main operations. For the types of discs that can be played, see Playable discs on page 8. For the types of files that can be played, see Playable files on page 10.
Playing specific titles, chapters or tracks BD DVD AVCHD CD Playing in slow motion BD DVD AVCHD CD Music files 04 Music files While playback is paused, press and hold / Input the number of the title, chapter or track you want to play. • Use the number buttons (0 to 9) to input the number, then press ENTER. or /. PLAY PREV PAUSE STOP NEXT • The speed switches each time the button is pressed (the speed is displayed on the TV screen). The speed steps depend on the disc.
04 • The subtitles can also be switched using /. Switching the camera angles • The subtitles can also be switched by selecting Subtitle from the TOOLS menu. For BD-ROM and DVD-Video discs on which multiple angles are recorded, the angles can be switched during playback. BD DVD AVCHD CD Note • The types of recorded subtitles depend on the disc. Music files • If the subtitles are not switched when SUBTITLE is pressed, switch them from the menu screen. During playback, press ANGLE.
Displaying the disc information Note • The types of recorded audio streams/channels depend on the disc. BD DVD AVCHD CD • If the audio stream/channel is not switched when AUDIO is pressed, switch it from the menu screen. • Some BD-ROMs do not include secondary audio. • Secondary audio mark is not displayed if Angle/ Secondary Indicator is set to Off (page 42). Music files Press DISPLAY.
04 3 Input the time. Use the number buttons (0 to 9) or / to input the time. 2 Select the type of search. Use / to select, then press ENTER. Use / to move the cursor. See the table on page 33 for the search types.
Playing a specific section within a title or track repeatedly (A-B Repeat) Use this procedure to play a specific section within a title or track repeatedly. Playing repeatedly (Repeat Play) 04 Use this procedure to play the currently playing disc, title, chapter, track or file repeatedly. 1 During playback, press PLAY MODE to display the Play Mode screen. 1 During playback, press PLAY MODE to display the Play Mode screen.
04 Playing in random order (Random Play) Use this procedure to play the tracks or files in random order. 1 During playback, press PLAY MODE to display the Play Mode screen. VIDEO SELECT PLAY MODE HOME MEDIA GALLERY DISPLAY POPUP MENU MENU TOOLS TOP MENU The Play Mode screen can also be displayed by selecting Play Mode from the TOOLS menu. 2 Select Repeat/Random. Use / to select, then press ENTER.
About Play Mode types 04 The functions that can be used differ according to the type of disc and file. In some cases, some of the functions cannot be used. Check the usable functions on the table below.
04 Playing from the Home Media Gallery The Home Media Gallery lets you display a list of the titles, tracks or files recorded on the disc. The discs that can be played from the Home Media Gallery are as shown below (see also page 8). • BD-R/-RE discs • DVDs recorded in VR format • Music CDs (CD-DAs and DTS-CDs) • DVDs/CDs on which only data files of music files, etc. are recorded 3 Select the title or track to be played. Use / to select, then press ENTER.
3 Select Music. Press ENTER. Playback starts. The Now Playing screen (shown below) is displayed. 04 Currently playing file CD-ROM Music 001.mp3 Play Music 0.02.33 0.05.34 DATA DISC Total file playing time Elapsed time View available music. 4 Select Folders or All Songs. Use / to select, then press ENTER. • Folders – The files in the selected folder are displayed. • All Songs – All the recorded files are displayed.
04 The Home Media Gallery can also be displayed by selecting Home Media Gallery from Home Menu pressing ENTER. 3 Select the track/file to be added. Use / to select. 2 Select HMG Playlist. Use / to select, then press ENTER. Folders CD-ROM/Music Music001.mp3 Music002.mp3 Music003.mp3 Music004.mp3 Music005.mp3 Music006.mp3 Music007.mp3 Music008.mp3 Home Media Gallery BD PLAYER CD-ROM HMG Playlist 15 items 4 Press TOOLS to display the TOOLS menu.
Chapter 5 05 Adjusting audio and video Adjusting the video 2 Select the item to be adjusted. Use / to select. The quality of the playback picture can be adjusted according to the TV you are using. Video Adjust [ Memory1 ] Prog. Motion Motion Auto1 Pure Cinema 1 During playback, press VIDEO ADJUST to display the Video Adjust screen.
05 Closing the Video Adjust screen Press HOME MENU. Closing the Audio DRC screen Press ENTER or About Pure Cinema HOME MENU.
Chapter 6 Advanced settings 06 Changing the settings (Initial Setup) Operating the Initial Setup screen 1 When playback is stopped, display the Home Menu screen. Press HOME MENU. ENTER HOME MENU RETURN PLAY 2 Select and set Initial Setup. Use / to select, then press ENTER. TOOLS TOP MENU ENTER HOME MENU RETURN HOME MENU BD PLAYER Home Media Gallery Initial Setup Set up the player for use. 3 Select the item and change the setting. Use /// to select, then press ENTER.
06 Note • Items that cannot be changed are indicated in gray. The items that can be selected depend on the player’s status. • The factory default settings are indicated in bold. Video Out Setting Options Explanation TV Aspect Ratio 16:9 (Widescreen) Select this when connected to a wide (16:9) TV. 4:3 Video Out DVD 16:9 Video Out Still Picture Audio Out Speakers En Select this when connected to a conventional TV. Full 4:3 pictures are displayed over the entire screen.
HDMI Setting Options Explanation HDMI High-Speed Transmission On Select this when connected with a High Speed HDMI™ cable (page 15). Off Select this when connected with a Standard HDMI™ cable (page 15). 06 The player’s setting screen is closed if the output video resolution is switched by changing the HDMI High-Speed Transmission setting. HDMI Color Space Auto The video signal that is output (YCbCr or RGB) is switched automatically.
06 Options Setting Options Output Terminal Priority Select the terminals for outputting video and audio signals with priority. For details, see Changing the terminals for outputting video and audio signals (Output Terminal Priority) on page 48. On Screen Display On Select this to display the operation indicators (Play, Stop, etc.) on the TV screen. Off Select this if you do not want to display the operation indicators (Play, Stop, etc.) on the TV screen.
Changing to other language at language setting 1 Select and set Speakers. Use / to select, then press ENTER. 06 TOOLS TOP MENU ENTER Note HOME MENU • Refer to Language Code Table on page 56. • If a language not recorded on the BD/DVD is set, one of the recorded languages is automatically selected and played. 1 Select and set Other. Use / to select, then press ENTER. TOOLS TOP MENU ENTER HOME MENU RETURN 2 Change the language. Use / to change, then press ENTER.
06 Adjusting the output level of the various speakers (Channel Level) Adjust each output level of the different speakers by using test tones. This setting is only valid for analog audio outputs. 1 Select and set Speakers. Use / to select, then press ENTER. • Auto – Switch the speaker to be adjusted automatically. • Manual – Switch the speaker to be adjusted manually. Caution • Test tones are output. Lower the volume of the device connected to the player. 4 Adjust the output level.
3 Input the password. Use the number buttons (0 to 9) or / to input the number, then press ENTER to set. Changing the Age Restriction for watching BD-ROMs 06 Use / to move the cursor. For BD-ROMs containing scenes of violence, for example, watching can be restricted by setting an age restriction for the BD-ROMs. ENTER CLEAR SECONDARY AUDIO VIDEO OUTPUT RESOLUTION VIDEO SELECT PLAY MODE HOME MEDIA GALLERY DISPLAY BD DVD AVCHD CD Music files 1 Select and set Parental Lock.
06 3 Input the password. Use the number buttons (0 to 9) or / to input the number, then press ENTER to set. Changing the Parental Lock level for watching DVDs Use / to move the cursor. Some DVD-Video discs containing scenes of violence, for example, have Parental Lock levels (check the indications on the disc’s jacket or elsewhere). To restrict watching these discs, set the player’s level to the level lower than the discs.
3 Input the password. Use the number buttons (0 to 9) or / to input the number, then press ENTER to set. Use / to move the cursor. Changing the Country/Area code BD DVD AVCHD CD 06 Music files Note • Refer to Country/Area Code Table on page 56. ENTER CLEAR SECONDARY AUDIO VIDEO OUTPUT RESOLUTION 1 Select and set Parental Lock. Use / to select, then press ENTER.
06 3 Input the password. Use the number buttons (0 to 9) or / to input the number, then press ENTER to set. Use / to move the cursor. Changing the terminals for outputting video and audio signals (Output Terminal Priority) Set the video and audio terminals to be used. 1 Select and set Options. Use / to select, then press ENTER.
3 Select the terminal for outputting video signals. Use / to select, then press . When a digital output is selected for the video output terminal, Video is fixed at HDMI and cannot be changed. When an analog output is selected for the video output terminal, Component Video or S-Video/Video can be selected for Video. • Linear PCM (2-channel) audio signals are output from the audio terminals other than the one set at Audio, regardless of the audio format and the player’s settings.
06 About the audio output settings The audio signals that are output differ according to the audio format recorded on the disc and the player’s settings. Check on the table below. AUDIO OUT terminal Audio format 2ch2 BD-ROM Dolby Digital 5.1-channel audio Converted to 2channel audio Linear PCM MPEG-2 AAC Converted to 2channel audio 5.1-channel audio MPEG Dolby Digital DTS Digital Surround Converted to 2channel audio 5.
Chapter 7 07 Additional information Troubleshooting Incorrect operation is often mistaken for trouble or malfunction. If you think that there is something wrong with this component, check the points below. Sometimes the trouble may lie in another component. Inspect the other components and electrical appliances being used. If the trouble cannot be rectified after checking the items below, please contact customer services. In the US, call Toll Free (800) 421-1404.
07 Problem Check Remedy Picture is disturbed during playback. Picture is dark. • This player supports Macrovision analog copy protection technology. With some TVs (such as with built-in video deck), the picture will not be displayed properly when the copy protected DVD title is played. This is not a malfunction. • If the player and TV are connected via a DVD recorder/video deck, etc., the picture will not be displayed properly due to analog copy protection. Connect the player and TV directly.
Problem Check Remedy Multi-channel sound is not output (continuous). Is multi-channel sound selected? Use the menu screen or AUDIO to switch the disc’s sound to multi-channel. 07 Is Audio Out set to audio formats supported by the connected • Read the operating instructions of the connected AV receiver AV receiver or amplifier? or amplifier and check the supported audio formats. • Set Audio Out properly (page 40).
07 Problem Check Remedy No picture is displayed. Is the HDMI indicator lit? • If the HDMI indicator is not lit, read the HDMI device’s operating instructions and switch to the proper input. • If the HDMI indicator is lit, use OUTPUT RESOLUTION to switch the output video resolution (page 25). Are the terminals for outputting video signals properly set? Press VIDEO SELECT to switch the HDMI OUT terminal.
Others 07 Problem Check Remedy The power turns off automatically. Is Auto Power Off set to On? If Auto Power Off is set to On, the power turns off automatically if no operation is performed for over 30 minutes (page 42). Is HDMI Control set to On? The player’s power may turn off together with the power of the connected TV. If you do not want the player’s power to turn off when the TV’s power is turned off, set HDMI Control to Off (page 41). The power turns on automatically.
07 Language Code Table and Country/Area Code Table Language Code Table Language name (language code), input code Japanese (ja/jpn), 1001 Dzongkha (dz/dzo), 0426 English (en/eng), 0514 Esperanto (eo/epo), 0515 French (fr/fra), 0618 Estonian (et/est), 0520 German (de/deu), 0405 Basque (eu/eus), 0521 Italian (it/ita), 0920 Persian (fa/fas), 0601 Spanish (es/spa), 0519 Finnish (fi/fin), 0609 Chinese (zh/zho), 2608 Fijian (fj/fij), 0610 Dutch (nl/nld), 1412 Faroese (fo/fao), 0615 Portuguese (pt/por), 1620 Frisi
Specifications 07 Model BDP-51FD Type Blu-ray Disc PLAYER Rated voltage AC 120 V Rated frequency 60 Hz Power consumption 34 W Power consumption (standby) 0.5 W Weight 5.6 kg (12 lb 6 oz) External dimensions (including projecting parts) 420 mm (W) x 124 mm (H) x 361 mm (D) (16 9/16 in. (W) x 4 15/16 in. (H) x 14 1/4 in.
07 Cautions on use Moving the player If you need to move this unit, first remove the disc if there’s one loaded, and close the disc tray. Next, press STANDBY/ON to switch the power to standby, checking that the POWER OFF indication on the front panel display goes off. Wait at least 10 seconds. Lastly, disconnect the power cord. Never lift or move the unit during playback — discs rotate at a high speed and may be damaged.
Handling discs Glossary 07 Do not use damaged (cracked or warped) discs. Do not scratch the disc’s signal surface or let it get dirty. Aspect ratio Do not load more than one disc into the player at a time. The ratio of a TV screen’s width to its height. Conventional TVs have an aspect ratio of 4:3, while high definition (HD) and widescreen TVs have an aspect ratio of 16:9. Do not glue paper or put stickers onto the disc, or use a pencil, ballpoint pen or other sharp-tipped writing instrument.
07 Deep Color This is one of the capabilities of HDMI™. The players supporting Deep Color can transmit a video signal with a color bit depth of greater than 8 bits per color component. Subtle color gradations can be reproduced when connected to a TV that supports Deep Color. Dolby Digital Dolby Digital is an audio format to record the sound in up to 5.1 channels with a fraction of the amount of data as compared to linear PCM audio signals.
S-Video output An output terminal for transmitting separate luminance (Y) and color (C) signals over a single cord. It offers clearer pictures than the composite video output. 07 Secondary audio Some BD-ROMs include sub audio streams mixed with the main audio. These sub audio streams are called “secondary audio”. On some discs this secondary audio is recorded as the audio for the secondary video.
07 Licenses The licenses for the software used on this player are shown below.
Introduction The FreeType Project is distributed in several archive packages; some of them may contain, in addition to the FreeType font engine, various tools and contributions which rely on, or relate to, the FreeType Project. This license applies to all files found in such packages, and which do not fall under their own explicit license. The license affects thus the FreeType font engine, the test programs, documentation and makefiles, at the very least.
07 libpng versions 0.89, June 1996, through 0.96, May 1997, are Copyright © 1996, 1997 Andreas Dilger Distributed according to the same disclaimer and license as libpng0.88, with the following individuals added to the list of Contributing Authors: John Bowler Kevin Bracey Sam Bushell Magnus Holmgren Greg Roelofs Tom Tanner libpng versions 0.5, May 1995, through 0.88, January 1996, are Copyright © 1995, 1996 Guy Eric Schalnat, Group 42, Inc.
In order to support file conversion and viewing software, we have included considerable functionality beyond the bare JPEG coding/decoding capability; for example, the color quantization modules are not strictly part of JPEG decoding, but they are essential for output to colormapped file formats or colormapped displays. These extra functions can be compiled out of the library if not required for a particular application.
07 The TIFF 6.0 file format specification can be obtained by FTP from ftp://ftp.sgi.com/graphics/tiff/TIFF6.ps.gz. The JPEG incorporation scheme found in the TIFF 6.0 spec of 3-June-92 has a number of serious problems. IJG does not recommend use of the TIFF 6.0 design (TIFF Compression tag 6). Instead, we recommend the JPEG design proposed by TIFF Technical Note #2 (Compression tag 7). Copies of this Note can be obtained from ftp.sgi.com or from ftp://ftp.uu.net/graphics/jpeg/.
Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having been made by running the Program). Whether that is true depends on what the Program does. 1.
07 12.
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License Agreement applies to any software library or other program which contains a notice placed by the copyright holder or other authorized party saying it may be distributed under the terms of this Lesser General Public License (also called "this License"). Each licensee is addressed as "you".
07 70 En It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normally accompany the operating system. Such a contradiction means you cannot use both them and the Library together in an executable that you distribute. 7.
[Notice on GNU General Public License] This product include the software licensed for use under the terms of a GNU General Public License. A copy of the corresponding source code can be obtained by being charged the fee for distribution. To obtain a copy, contact your local Pioneer Customer Support Center. See the GNU website (http://www.gnu.org) for details of the GNU General Public License.
Should this product require service in the U.S.A. and you wish to locate the nearest Pioneer Authorized Independent Service Company, or if you wish to purchase replacement parts, operating instructions, service manuals, or accessories, please call the number shown below. 1–800–421–1404 Please do not ship your product to Pioneer without first calling the Customer Support at the above listed number for assistance. Pioneer Electronics Service, Inc. P.O. BOX 1760, Long Beach, CA 90801-1760, U.S.A.
