Manual
I TO PLAY AN LD, CDV OR CD (Continued) ..................
A
m
® 0 0
! i
I_ rl_l_l
II
A
m
To pause playback temporarily
PAUSE
B
The sound and/or video image
disappears and the II indicator lights
in the display window. Press PAUSE
II again to resume playback from the
position where pause mode was
entered,
• During playback of CD or CDVaudio
part, front panel./_l_ is also used
to pause playback temporarily,
To stop playback
I'1
Or
Once
When _/I,-I_ is next pressed, disc
playback starts again from the
beginning.
To stop playback and take out the
disc
or
EJECT
8
Twice
After removing the disc from the disc
table, press & or I_/I_P< to close the
table.
Discs marked with the _l_-V<mark
Discs marked C_[qare recorded with the CX noise reduction system
for powerful audio reproduction with little noise. (Analog audio only)
However, some discs marked E)[_ are not encoded with the signals
necessary to instruct the unit to automatically switch on the CX
system. If sound is noisy or undulates when a disc with a IC_I, mark
is played, press D/A/CX on the remote control unit.
• _ _& _ t_et_. O_ C_ \_(3. _s _3\_N,er meets t_e CX
EXPANDING SPECtFICA-fION.
To watch a TV broadcast:
Switch to the broadcast using the controls of your "IV.
Automatic picture stop
Some of discs contain recording of a special code called the "picture
stop code", which turns normal play or slow play automatically into
still frame display.
To cancel the automatic picture stop operation, press and hold _,-/l,_P<
_isp\a_./ed on the screen,, ]0 [e-activate, p_ess a_ ho\_ _-/_-_q _o_
more than 2 seconds again until "PSC OFF" is displayed.
2O
<VRB1142>