Manual
To clear program contents:
Press CLEAR on the remote control unit.
To specify the first track to be programmed:
Only the track to be played first can be specified.
1 Press EDIT.
2 Select the desired track by pressing SKIP _ or _.
3 Set the playing time with the digit buttons.
If the specified time is too short for any track to be
programmed:
Programming cannot be performed.
NOTES:
• With discs contained 33 tracks or more, programming may not
be correctly performed.
• With Compu Program Edit function, the programmed total playing
time is not occasionally close to the specified time compared
with Auto Program Edit.
• With LD discs, chapter No. 0 will not be programmed.
• With LD discs, when chapter No. 1 is programmed, the
programmed total playing time may slightly differ from the actual
calculation. This is not a malfunction.
37
<VRB1142>